How to know whether my iphone 5 imei replaced or not???

Please help

Where did you get it? In some (not all) countries, it is possible to purchase unlocked phones directly from Apple. Some carriers in some countries sell unlocked phones. Some carriers in some countries offer unlocking of iPhones.

Similar Messages

  • How to know whether balance carry forward has happened or not

    How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

    If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
    If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
    You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a  previous fiscal year are automatically carried forward to the current year after that initial run.

  • How i know that my iphone is factory unlocked or not?

    how i know that my iphone is factory unlocked or not surely?

    Did you request to have your phone to be unlocked by your carrier? Only the carrier can officially unlock it.

  • How to identify, whether your iphone is permanently unlocked or not?

    How to identify, whether your iphone is permanently unlocked or not?

    gautam30 wrote:
    How to confirm?
    Did you not read wjosten's reply?

  • How to know whether my system is J2EE compliant or not?

    How to know whether my system is J2EE compliant or not?
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Administrator>java -version
    java version "1.6.0_16"
    Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
    Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode, sharing)Is my box J2EE compliant?

    Trust me - I've been developing on an XP box for years and Java 1.6 for a good amount of time. This has been using Tomcat, JBoss, and Glassfish (and I try hard to forget about Oracle OC4J). These are application servers that implement part (Tomcat) or all (the rest) of the J2EE specification.
    Having said that, you'll want at least 2GB of RAM and a hundred or so megabytes of disk space. Less RAM will work but slowly. A reasonable processor (I'd say at least 1.5GHz or above) will speed development.

  • How to know whether my IPHONE 3G S is factory unlocked ?

    Hi,
    I have recently bought iphone 3G S but i dont know whether it is factory unlocked or not. Is there any other way i can confirm whether my iphone is factory unlocked or not ? Please help
    Thanks
    imran

    There is no such thing as a "factory unlocked iphone". Whether an iphone is available as unlocked or not is determined by the carriers that Apple has contracts with or if required by law where the iphone is sold. The unlock is, however, through the carriers, not Apple. Most of the time when someone posts as you do, they have a hacked phone, not an officially unlocked phone. If you restore or update your software, through itunes, the phone will be locked to the carrier it was originally locked to if not officially unlocked.

  • How to know that my iphone is factory unlock or not

    how to know that my iphone is factory unlock or not

    Where did you get it? In some (not all) countries, it is possible to purchase unlocked phones directly from Apple. Some carriers in some countries sell unlocked phones. Some carriers in some countries offer unlocking of iPhones.

  • How to know whether a country is in Europe or not?

    I want to know <b>whether a country is in EUROPE or not?</b> Pls help me in this regard.

    Hi,
    If you want to check you can just go to the website
    http://europa.eu/abc/european_countries/index_en.htm
    and check .
    Close the thread if it solves your purpose.
    Award Points if it helps.
    -Gaurang

  • How to know  Whether Partition is done for Cube or not

    Hi All,
    I need information regarding Partition of a cube.
    a)How do i know the Partition is done or not for Cube
    b)On what basis we should make parttion of Cube.
    Thanks and Regards,
    C.V.

    There are several threads on partitioning, so it would be a good start for this question (as with any question) to search the BI forums on "Partitioning" and review thsoe first.
    Some basic considerations on partitioning -
    - Your DB must support Range partitioning to permit partitioning your InfoCube. The option will be greyed out if it is not available.
    - InfoCube must be empty to be partitioned.
    - InfoCube can only be partitioned on 0FISCPER or 0CALMONTH.  You can define it so that you have a partition for each month/fiscper, or so that each partition will hold a few or several months of data.
    - Generally, you would not partition small cubes.
    - Thru BW 3.5 Aggregates automatically get partitioned the sme way the InfoCube is partitioned as long as the partitioning characteristic is in the aggregate.  In 2004s, I believe you have options as to whether an aggregate gets partitioned or not.
    - Partitioning may be done for query performance reasons and data administration.  If the queries on the InfoCube regularly run with restrictions/filters on the partitioning characteristic (FISCPER or CALMONTH), the database will "prune" any partitions that do not contain the FISCPER/CALMONTH value(s), so that it does not need to consider them , e.g. most of your users only run a sales query for the current and previous month, but your cube contains 3 years of data.  By partitioning on CALMONTH (we'll assume 1 partition / month), the database will exclude all but the two partitions from consideration.  This could help query performance a lot. or maybe only a little, depending on a variety of other factors.
    Again - it is important that the queries restrict onthe partitioning characteristic to be of any value on query performance.  So don't partition on FISCPER if all the queries use CALMONTH for restrictions.
    The data adminsitration reason you might partition is to improve selective deletion or archiving time.  These processes are capable of using a DB function to Drop the partition, which quickly removes the data from the cube, rather than having to run a resource intensive Delete query.  This only happens if you deletion/archiving criteria is set to remove an entire partition of data.
    Again - review the other threads on the BI forums on Partitioning.  Most questions you have will already have been asked and answered before, and post again on SDN if there is something you still have a question about.

  • How to know whether a TCode is called directly or not

    Hi all,
    I have a requirement to create a popup in a standard TCode. This TCode is recorded to BDC and used in another report.
    I would like to know how we can check (in code) whether the standard Tcode is being called directly or it is being called by a different program, function module or bdc ...
    Thanks,
    Khanh
    Edited by: Khanh Nguyen on Apr 1, 2010 4:37 PM

    Hi,
    It can be checked in the following way:
    IF sy-calld IS INITIAL.     
    ENDIF.
    " sy-called is initial if the program is run stand alone. If it called from another program, it is not initial.
    Thanks & Regards
    Rocky Agarwal

  • How to know whether data is being AES crypted or not?

    Hi Forum,
    I used AES crypting with an initial vector and a SecretKey.
    The problem is , for backward compatibility I need to check if the data had been crypted or not?
    if not crypted I need to show them in plain readable format instead of decrypting them.
    below is my Encryption/Decryption class
    public class AesEncryption
        private  final String CRYPTO_ALGO_= "AES";
        Cipher aesCipher_;
    // Create an 16-byte initialization vector
        private final byte[] initialVector_ = new byte[]{
                                                        (byte)0x8E, 0x12, 0x39, (byte)0x9C,
                                                              0x07, 0x72, 0x6F, 0x5A,
                                                        (byte)0x8E, 0x12, 0x39,(byte)0x9C,
                                                              0x07, 0x72, 0x6F, 0x5A
        private final SecretKey key_ = new SecretKeySpec(initialVector_, CRYPTO_ALGO_);
        public AesEncryption()
             *  Create a Cipher by specifying the following parameters
             *     Algorithm name - here it is AES
            try
                 aesCipher_ = Cipher.getInstance(CRYPTO_ALGO_);
            catch (NoSuchAlgorithmException e)
                e.printStackTrace();
            catch (NoSuchPaddingException e)
                e.printStackTrace();
        public  String encryptPassword(String password)
            String strEncryptedText ="";
            try{
             *  Initialize the Cipher for Encryption with secret key
            aesCipher_.init(Cipher.ENCRYPT_MODE,key_);
             *   Encrypt the password
            byte[] byteDataToEncrypt = password.getBytes();
            byte[] byteCipherText = aesCipher_.doFinal(byteDataToEncrypt);
                   strEncryptedText = new BASE64Encoder().encode(byteCipherText);
            catch (InvalidKeyException e)
                 e.printStackTrace();
            catch (BadPaddingException e)
                 e.printStackTrace();
            catch (IllegalBlockSizeException e)
                 e.printStackTrace();
            return strEncryptedText;
        public String decryptPassword(String encryptedPassword)
            String strDecryptedText = "";
            try
                 * Decrypt the Data
                byte[] byteCipherText = new BASE64Decoder().decodeBuffer(encryptedPassword.trim());
                aesCipher_.init(Cipher.DECRYPT_MODE,key_,aesCipher_.getParameters());
                byte[] byteDecryptedText = aesCipher_.doFinal(byteCipherText);
                strDecryptedText = new String(byteDecryptedText);
            catch (InvalidKeyException invalidKey)
                 invalidKey.printStackTrace();
            catch (BadPaddingException badPadding)
                 badPadding.printStackTrace();
            catch (IllegalBlockSizeException illegalBlockSize)
                 illegalBlockSize.printStackTrace();
            catch (InvalidAlgorithmParameterException invalidParam)
                 invalidParam.printStackTrace();
            catch (IOException e)
                e.printStackTrace();
            return strDecryptedText;
    } I just want to have a method like boolean isAESEncrypted(String data){ ????  } in my class.
    Could anybody give a helping hand for the same?
    Many thanks in advance
    Edited by: jagabandhu on Sep 16, 2010 10:54 AM

    jagabandhu wrote:
    I do have a choice to store the encrypted data only in 'varchar' format so I have to encrypt and store the password without changing the column data type in the database!
    Again many thanks for 'Notes:' these are definitely helpful.
    sabre150 wrote:
    If you have a choice, then you should add a digest of the cleartext to the ciphertext. ...I fear if I use any MessageDigest , my password will be byte[] instead present String format.Not relevant since you Base64 encode the ciphertext you can also Base64 encode the digest!
    for e.g.
    [http://gmailassistant.sourceforge.net/src/org/freeshell/zs/common/Encryptor.java.html]
    Could you please further guide me if I am in the right track?I thought I had guided you! I have pointed out what I see as the flaws in your code and I think you should use the more normal approach of just using a randomly seeded Message Digest.
    >
    FYI : I do not need a serious encryption format as per the present requirement. :)That is not serious encryption since it has at least 3 major security flaws.
    >
    Edited by: jagabandhu on Sep 16, 2010 1:17 PM

  • How to know whether my phone is unlocked or not

    how to know whether my iphone is unlocked or not.

    You don't know if you bought an unlocked iphone or not?
    What did you ask for?
    What does your reciept say?

  • How to trace a lost iphone using IMEI number?

    How to trace a lost iphone using IMEI number?

    Not possible.
    If your carrier has a blacklist service for phones reported lost or stolen that were activated with their network, this will prevent the phone from being activated on their network again.

  • HT1937 How do i know whether my iphone is locked to which carrier?

    How do i know whether my iphone is locked to which carrier?

    https://discussions.apple.com/message/22152723#22152723
    https://discussions.apple.com/message/21803344#21803344
    https://discussions.apple.com/thread/4477482
    more
    https://www.google.dk/search?q=af+hver+slags&oq=af+hver+slags&aqs=chrome..69i57j 0.528j0j7&sourceid=chrome&es_sm=93&ie=UTF-8#q=how+do+one+know+if+an+iphone+is+un locked

  • How to know whether the phone is replaced or not?

    Dear All,
    Please help in how to know whether Iphone 5 is replaced or not? I came to know that on replacement, imei number gets changed. please make me aware.

    Nobody here can make you aware.  You need to contact Apple directly.

Maybe you are looking for