How to know whether User is Buyer or not?

Hi,
I am developing a function module to create/update/unassign Employee Org Hierarchy. In this I have to know whether User is BUYER OR NON BUYER?.
If user is assigned to purchase org/purchase group then he will be BUYER or else he will be NON BUYER. If once I come to know whether user is BUYER OR NOT, then I have to proceed further differently in both the cases.
Pls help me out in this regard asap.
Thanks & Regards,
Nagaraju Maddi
Message was edited by: Nagaraju Maddi

Nagaraju
Buyer will be having purchaser roles like SAP_BBP_STAL_PURCHASER, SAP_EC_BBP_PURCHASER, SAP_EC_BBP_ST_PURCHASER. Check the roles of the users. If you find Purchaser(standard roles) or Buyer(in case of customized roles) in their roles then he/she will be buyer.
Similarly Non buyer user will be having Employee role like SAP_EC_BBP_EMPLOYEE.
Hope this will help you.
Do reward points for helpful solution.
Regards
Jagdish

Similar Messages

How to know whether sequencefile has loaded or not?

Customizing user interface.
I "reload sequencefile on start". And do not use SequenceFileView. Some sequencefile spends a long time for loading. And sometimes, reference of sequencefile should be empty. Because the sequencefile has being delete, or did not open any file last time, etc.
I need feedback from TS engine. How to get it?
Solved!
Go to Solution.

I think the following excerp from the TestStand help answers your question:
SequenceFiles Property (Read Only)
Syntax
ApplicationMgr.SequenceFiles
Data Type
SequenceFiles
Purpose
Collection of sequence files the application opens.
Remarks
This property eliminates the need to keep an array of open
sequence files. Use the ApplicationMgr.OpenSequenceFile
method to add files to the collection and the ApplicationMgr.CloseSequenceFile
method to remove files from the collection.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to know whether a vacation rule is set for a user

Hi,
How to know whether a vacation rule is set for a user or not in the BPM process. Can anyone help me in this.
Thanks,

In Linux a user has to have read permission on a file to even see that it exists. As a result, if a user (or a group to which they belong) doesn't have read access to the file File.exists() will return false. Windows which doesn't have as tightly controlled access to files will admit that a file exists whether it can be read or not.
PS.
This is proof that I should never answer a question off the top of my head when I haven't had my red bull yet. This is wrong. You will be able to see it if you have read and execute on the directory.
thumps self in head
Message was edited by:
puckstopper31

How to know whether entered date is SAPdate format or User dateformat.

Hi all,
I am uploading data from SAP to internal table ,
here I need to do below logic ,
If user entered SAP dateformat in excel , no need to convert after uploading.
elseIf user entered user default need to convert to SAP date format.
If user entered in other foramt.
need to give error.
so , how to know whether entered data is in SAP format or not.
Regards,
vinesh

Try this logic
IF call fm DATE_CHECK_PLAUSIBILITY = true
"date etered in SAP internal format
ELSE if call fm CONVERT_DATE_TO_INTERNAL = true
"date entered in user format
else.
"incorrect format
endif.
Regards
Marcin

How to know whether my Windows Phone 8.1 App is Associated with the store or not?

How to know whether my Windows Phone 8.1 App is Associated with the store or not?
I have an Windows Phone 8 app already in the store , Now i upgraded it to 8.1 it got upgraded to Windows Phone Silverlight 8.1.
Now iam trying to use Single Sign on feature on this app but it is showing the error message like
the App is not Configured correctly i followed the process from Signing users in to OneDrive
please guide me how to do this?
Mohan Rajesh Komatlapalli

You should post to publish forum.

How to know whether the Content Type at Library level is Inheriting Parent Content type or not Using Powershell?

Hi,
How to know whether the Content Type at Library level is Inheriting Parent Content type or not using Powershell?
Is there any property for that? Or Do I need to compare the Content type Id's at Site collection level and Library level?
Any help would be greatly appreciated.
Thank you,
AA.

Hi Ashok,
For a content type, there is an attribute called Inherits, the value of this attribute determines whether the content type inherits fields from its parent content type when it is created.
If Inherits is TRUE, the child content type inherits all fields that are in the parent, including fields that users have added.
If Inherits is FALSE or absent and the parent content type is a built-in type, the child content type inherits only the fields that were in the parent content type when SharePoint Foundation was
installed. The child content type does not have any fields that users have added to the parent content type.
More information, please refer to the link:
https://msdn.microsoft.com/en-us/library/office/aa544268.aspx?f=255&MSPPError=-2147217396
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to check whether user login in SNC mode or Non - SNC Mode

Hi
When SNC is enabled system will accept secure network connections. But,It is up to the user to login in SNC mode or NOT.
Can any one let me know How to check whether user login in a SNC mode / Non-SNC mode?. Is it only through SU01?.
Is there any other possibility?. where to check if user login through RFC connections?.
Please correct me if i am wrong.
Regards
Srinivas P.

Hi,
Where to check if user login through RFC connections?
Check T-Code SM04 on every instance. In the column Type you can see what kind of login has been used (GUI, RFC, Plugin, System).
But,It is up to the user to login in SNC mode or NOT.
Depends. Check these [parameters|http://help.sap.com/saphelp_nw04/helpdata/EN/19/164442c1a1c353e10000000a1550b0/content.htm]:
snc/accept_insecure_cpic
snc/accept_insecure_gui
snc/accept_insecure_r3int_rfc
snc/accept_insecure_rfc
Regards,
Sven

How to know whether balance carry forward has happened or not

How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a previous fiscal year are automatically carried forward to the current year after that initial run.

How to know whether there is any change in a transaction in ic webclient

Hi,
There is one activity screen in the ic web(CRM 5.0). There is two button(Change, Save , Sendnotification) on that screen.
Sendnotification: if i click this button then it will check whether there is any change done using below logic and will send the noti..:
DATA:lv_transaction   TYPE REF TO if_bol_transaction_context,
lv_entity       TYPE REF TO cl_crm_bol_entity.
lv_transaction = lv_btorder->get_transaction( ).
      IF lv_transaction->check_save_needed( ) EQ 'X'.
         then save the changes and send notification
      ENDIF.
Question:
Now i clicked on the Change button and did some changes.Then saved.
Then again i did some changes, now i clicked on the Sendnotification button.It sent an notification.
Now i again clicked on the Sendnotification(this time i didnt do any changes), it sent the same notification again.
So how to know that actully changes done or not & how to write code if there is no changes?
During debugging , i found that the method check_save_needed always returns 'X' as long as i am in the chage mode of that activity. As a result if i dont do any changes also in the activity and click the button , it sends the notification.
please suggest how to restrict using coding........
Thanks
sudhansu

Not solved.

How to know whether the javascript is disabled or not while loading the jsp

Hi,
My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
I want some Java code or JavaScript code.

To the point, just let JS fire a specific HTTP request inside the same session.
This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

How to know whether a method is thread-safe through the java-doc?

In some book, it says that SAXParserFactory.newSAXParser() is thread-safe,but in the java-doc,it doesn't say that.
newSAXParser
public abstract SAXParser newSAXParser()
throws ParserConfigurationException,
SAXExceptionCreates a new instance of a SAXParser using the currently configured factory parameters.
Returns:
A new instance of a SAXParser.
Throws:
ParserConfigurationException - if a parser cannot be created which satisfies the requested configuration.
SAXException - for SAX errors.
I want to know, how to know whether a method is thread-safe?

System.out is a PrintStream object. None of the methods there use the synchronized modifier, but if you look in the source code, you will find out it is thread-safe, because it will use synchronized blocks whenever it writes some text.
The source code is in the src.jar file which you can extract.
I didn't find any comments about that PrintStream is thread-safe in the API.

How to know whether the current database is using a password file or not?

How to know whether the current database is using a password file or not?

The remote_password_file is the parameter that determines if you can use or not a password file. The values this parameter can have are NONE, SHARED, EXCLUSIVE. It is pretty obvious, if it is set to either SHARED or EXCLUSIVE the oracle instance has enabled the access through a password file for the SYSDBA and SYSOPER roles.
~ Madrid

How to know whether database(oracle) is up and running at OS level

how to know whether database(oracle) is up and running at OS level...!!!

depends on the O/S you are using, Unix or Windows? I would use Korn shell script to monitor the Oracle background process and scripts to check of Oracle is accepting connections.
This UNIX command will show the number of processes for your instance:
ps -ef|grep $ORACLE_SID|grep -v grep|grep -v ora_|wc u2013l
In Windows I would look into services.msc

How to know whether a connection leak occured in weblogic8.1

How to Know whether Conenction Leak has Occured or Not ??..Where does the WeblogicServer8.1 print the STACK TRACE if connection Leak has occured ? or does it maintain a LOG FILE , where any entries can be seen................

To turn on Debug flags add these to the startup scripts.
-Dweblogic.Debug=weblogic.JDBCConn="true",weblogic.JTAJDBC="true"
Essentially, you will need to edit the config.xml file (when the server is down) and add the proprty to the ConnectionPool definition:
http://e-docs.bea.com/wls/docs61/config_xml/mbeans.html
ConnLeakProfilingEnabled="true"
Thanks and regards,
Pazhanikanthan. P

How to know active user in Ad ? & how many days from not use user id ?

How to know active user in Ad ? & how many days from not use user id ?
Thanks & Regards, Amol . Amol Dhaygude

Hi Amol,
You can use the below command from the command prompt of DC to get all the AD users who are inactive for last
X weeks,
dsquery
user -inactive X
To extract the inactive user information to a CSV file use the below command,
dsquery user -inactive X > c:\TestFolder\InactiveUsers.csv
NOTE: The value
X represents number of weeks, for example if your requirement is to find the inactive users for last 90 days then the
X value should be 13.
Regards,
Gopi
JiJi Technologies

How to know whether User is Buyer or not?

Similar Messages

Maybe you are looking for