How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar Guntla
Hi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Master data object business content activation
Hello ,
How to activate business content for master data ingoobjects . Like 0p_plant .
I activated PP cube and just want to proceed now for masterdata with out missing it's attribute .
Should I drag infoobject and select dataflow before , Is it correct method ? But in this case , I am getting so many other object which i don't want .
I only want to activate master data object , ( it's datasources , transferrule , update rule and infopackage if possible )
PLease suggestHi Akshay,
you can very activate the object of your own choice by simple drag and drop.
Howcver, this is usually not recommended as you might miss objects which are very important in the data flow.
Apart from this you can also make selections of the objects from all the object included due to the option " before and after data flow" by checking or unchecking them while installing your content.
Regards,
Tapish -
How to load data for attribute of Master Data Object from PSA
Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSAJr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help -
How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AMHi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
Open hub Services - How to extract the master data related to a object ?
Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PMHi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks. -
How make master data object available for ACR
Hi,
I remember that there is a program to run so that we can make the master data object available for ACR.
i am not getting the program name. Please advice.
Thanks,
DevHi........
If a master data is schedule for some changes...ie InfoObjects and hierarchies that are planned for structural change are selected by default.........If u go to RSA1 >> Administrator Workbench >> Tools >> Hierarchy/Attribute Changes from the menu...........If u click on Infoobject List or Hierachy List.........u will find that those infoobjects r already selected.....
If u want to run ACR for some infoobjects manually.............either u can do it in RSA1..........by only selecting those infoobjects for which u want to run the ACR..........or u can also use the prog : RSDDS_AGGREGATES_MAINTAIN.........
If that Particular infoobject is not there in the Infoobject or Hierarchy List in RSA1..............that means no structurak changes r required...........no need to run ACR..........
Regards,
Debjani......... -
How do know which services use up my data on my tablet? 2:How can I avoid this?
How do know which services use up my data on my tablet? 2:How can I avoid this?
@mwbail2,
Great question! Managing your data usage is definitely important. You can view what apps are using data by going to Settings and then Mobile data on your phone. There is will show you the apps using data.
If you want to avoid the data usage on the apps you want to make sure you close out the apps when not in use. You can also make sure that they are not automatically updating whenever there is a new update to the app. To do this simply go to the Play Store and select Menu. Then go to Settings and there you will see the option to change the auto update to update over wifi only.
If you want to complete turn off data, just go to Settings and then mobile network and turn it off. Keep me posted if you need further assistance.
JohnB_VZW
Follow us on Twitter @VZWSupport -
How to know which object is in which transport requeset
hi frnds
how to know which object is in which transport requesthi Preethi
try with transaction se01 then clic on the tools icon under the menu you will get a list of function.
then select search for object in transport request (maybe the text is a bit different) then enter information like for example R3TR OSOA and the name of a datasource. if you don't know the meaning of R3TR use the match code and use it also for objects you want to find infosource infoobject etc... don't forget to mark the flag select if your transport request is released or not and then execute you will get the list of all transport requests containing your search object.
hope this could help you
best regards
Boujema -
How to Display the ColumnName for the Text of any Master Data Object in BEx
Hi Experts,
In Bex Analyzer While Displaying the Key and text of any Master data object it shows column name for master data key but not for the text, here client requirement is he wants to see the Text column name as Description for any master data text.
say Customer Number is a master data object , while displaying key and text of CustomerNumber - column names should look like as below
CustomerNumber Description
C11111 Pepco
C11112 Coke
but usually in Bex Analyzer it displys as following(Text without column Name)
CustomerNumber
C11111 Pepco
C11112 Coke
Please suggest how can we achive this requirement, thanks in advance.
Regards,
ChandraHi Chandra,
I suggest you to enhance your datasource with text feild, by adding text feild to your datasource in ECC side and replicate it ti BI side.
For this you have to write code at CMOD.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16?QuickLink=index&overridelayout=true
Better this doc will help you.
Regards,
rvc -
Master Data Object as an InfoProvider
I have a master data object which is loaded with data. I need to carry out some analysis via queries on this object. What are the consequences if I now switch on the InfoProvider flag in the InfoObject? Thanks
Hi,
you will see it then underneath the InfoArea in the InfoProviderSection.
Then you'll be able to report onto the InfoObject.
Additionally, you can then use flexible Update for this InfoObject as well.
As far as I know, there are no negative aspects to this switch.
hth
cheers
Sven -
How to know last access date for the schema's
Dear all,
could u plz tell me How to know last access date for the schema’s
Regards,
Srinivasa rao.PSrinivas,
could u plz tell me How to know last access date for the schema’s
In Oracle, we don't access schemas but schema objects.And this informationis not kept anywhere persistantly.As Amit also mentioned,if you do need it,you have to enable Auditing.
Aman.... -
List of Master Data Objects in ECC 6.0
Hi All,
Can anyone please provide me a list of Master Data Objects in ECC 6.0? *\[removed by moderator\]
Thanks,
Kaushik Koli.
Edited by: Kaushik Koli on Jul 1, 2008 1:20 PM
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PMHi Gareth,
Thanks for your reply.
I know it is not an easy task but I need to provide a list of master data objects in ECC 6.0.
Can you atleast tell me where to start from? Any manual way of finding it will also do?
Regards,
Kaushik Koli. -
Hi Folks,
can any one please tell me how can i delete a particular keyfigures data i na master data object.
just i loaded wrong data to the keyfigure.i want to delete the whole data for the keyfigure only.so any one please help me .its very urgent.
Thanks in advance.
ashok.Hi Ashok,
you cant delete particular attribute (as keyfigure in ur case..) data for particular master data.. you need to delete entire master data once.. but before that you need to delete transactional data related that master data.. and then load once again with the correct data...
but you can't delete particular attribute(key figure data)...
otherwise.. you can load once again the correct data.. because.. if you load same data means master data will just ovverwrite the previous data so, you can try with this option also..
regards
@jay -
How to create generic master data datasource .
How to create generic master data datasource which utilises ALE change pointers for extraction of master data.
Hi,
For any master data lets say, Material Master, for this you need to create a view
based on your requirement by selecting one or more tables into your view and
keeping all the required fields in the view as viewfields and go to RS02 create
generic data source, select the view option as source and put the view, save and
activate, at the same time set the delta pointer as to whether Numericpointer/date/timestamp..this way you can create a generic DS then transfer the stru. and at the BW side replicate the source system..and so on..
Hope this helps..
Assign points if useful.
Need further info revert..
Cheers,
Pattan. -
Loading from ODS to Master data Object
Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishnaHi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh
Maybe you are looking for
-
I have created a try-catch statement, I have also created a home made Invalid value exception class. I have also thrown the InvalidValueException in a calculate method in a seperate class. I am getting the error of unreachable catch block. Here is my
-
Problem with Using Smart Fit - 'Error' mess
When I try to transfer higher bitrate?tracks to my device (MuVo N200)? using the Smart Fit feature, I get an error message: "unable to transfer". This just started happening tonight. I would like to solve this problem as I wish to put all tracks on m
-
Hello, Recently I have been experiencing problems with my sound in my iMac with OS X 10.6.2 In my sound output device list, I have the following: - Headphones (Should be selected) - Soundflower (2ch) - Soundflower (12ch) To hear sound from my iMac sp
-
How to find file as in OS 10.4.11
Hi... I can't seem to do a FIND for a file, like I could in OS 10.4.11 (on my other Mac)(see image below). I cannot: a) select the type of search (by name, content, dates, size, etc.); b) specify "contains", "end with", "begins with", etc.; c) add m
-
Hi, I have a query that returns 10,000 rows (a Noticeboard / Forum). Currently posts from the last 14 days are displayed and when they drop off they are available in a search archive. That's ok. For seo, I need to be able to use Next n functionality