How to know which SPS a system has?

Hi,
Because Support Package Stack (SPS) is a sum of Kernel + ABAP patches + Java patches, so how can I know which Support Package Stack (SPS) a system currently has?
Thanks,

Hi Toan,
               There are diffenent way's to find out which stack are you now? but it's depent's on the SAP release too. If you are using NW04 or NW04s and using EP you can check it from http://<host name>:50xxx/index.htm  then go to system admin there you find all the information.
  If you want to get it from ABAP stack, check SAP_APPL patch no, It is the SP stack no. Yo can get good doc at the following link.
http://service.sap.com/sp-stacks
Regards,
Hari.

Similar Messages

  • How to know which version Netweaver is been installed in the system

    How to know which version Netweaver is been installed in the system.
    I wanted to know whether i have installed NW04 SP Stack 13 or higher.
    Suggestions / Hints are wellcome
    -Naren

    hi,
    Pretty simple yar
    In portal goto>sysconfig>support-->u can find the Version in the content area at the bottom.
    There u find the SAP WAS version and EP version.
    in NWDS
    goto help---->About sap NWDS -->then popup will disply you find the version.
    Vesion: 2.0.14 like
    Thanks,
    Lohi.
    Message was edited by:
            Lohitha M

  • How to know which master data objects need to activated  in R3

    SALES OVERVIEW CUBE -0SD_C03
    How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
    its very urgent please advise.
    R/3 in RSA5
    Sales Master Data
    0ACCNT_ASGN_TEXT               Account assignment group for this customer   
    0ACCNT_GRP_TEXT                Customer account group                       
    0BILBLK_DL_TEXT                Locked                                       
    0BILBLK_ITM_TEXT               Billing block for item                       
    0BILL_BLOCK_TEXT               Billing block in SD document                 
    0BILL_CAT_TEXT                 Billing Category                             
    0BILL_RELEV_TEXT               Relevant for Billing                         
    0BILL_RULE_TEXT                Billing rule                                 
    0BILL_TYPE_TEXT                Billing Type                                 
    0CONSUMER_ATTR                 Consumer                                     
    0CONSUMER_LKLS_HIER            Consumer                                     
    0CONSUMER_TEXT                 Consumer                                     
    0CUST_CLASS_TEXT               Customer Classification                      
    0CUST_GROUP_TEXT               Customer Group                               
    0CUST_GRP1_TEXT                Customer Group 1                             
    0CUST_GRP2_TEXT                Customer Group 2                             
    0CUST_GRP3_TEXT                Customer Group 3                             
    0CUST_GRP4_TEXT                Customer Group 4                             
    0CUST_GRP5_TEXT                Customer Group 5                             
    0DEALTYPE_TEXT                 Sales Deal Type                              
    0DEL_BLOCK_TEXT                Delivery block (document header)             
    0DEL_TYPE_TEXT                 Delivery Type                                
    0DISTR_CHAN_TEXT               Distribution Channel                         
    0DIVISION_TEXT                 Division                                     
    0DLV_BLOCK_TEXT                Schedule line blocked for delivery           
    0DOC_CATEG_TEXT                SD Document Category                         
    0DOC_TYPE_TEXT                 Sales Document Type                          
    0INCOTERMS_TEXT                Incoterms (Part 1)                           
    0INDUSTRY_TEXT                 Industry keys                                
    0IND_CODE_3_TEXT               Industry code 3                              
    0IND_CODE_4_TEXT               Industry code 4                              
    0IND_CODE_5_TEXT               Industry code 5                              
    0IND_CODE_TEXT                 Industry code                                
    0ITEM_CATEG_TEXT               Sales document item category                 
    0ITM_TYPE_TEXT                 FS item type                                 
    0KHERK_TEXT                    Condition Origin                             
    0MATL_GRP_1_TEXT               Material Group1                                         
    0MATL_GRP_2_TEXT               Material Group 2                                         
    0MATL_GRP_3_TEXT               Material Group 3                                         
    0MATL_GRP_4_TEXT               Material Group 4                                         
    0MATL_GRP_5_TEXT               Material Group 5                                         
    0MATL_TYPE_TEXT                Material Type                                            
    0MAT_STGRP_TEXT                Material statistics group                                
    0NIELSEN_ID_TEXT               Nielsen ID                                               
    0ORD_REASON_TEXT               Order reason (reason for the business transaction)       
    0PICK_INDC_TEXT                Indicator for picking control                            
    0PRODCAT_TEXT                  Product Catalog Number                                   
    0PROD_HIER_TEXT                Product Hierarchy                                        
    0PROMOTION_ATTR                Promotion                                                
    0PROMOTION_TEXT                Promotion                                                
    0PROMOTYPE_TEXT                Promotion Type                                           
    0PROV_GROUP_TEXT               Commission Group                                         
    0REASON_REJ_TEXT               Reason for rejection of quotations and sales orders      
    0REBATE_GRP_TEXT               Volume rebate group                                      
    0RECIPCNTRY_TEXT               Destination country                                      
    0ROUTE_TEXT                          Route                                                    
    0SALESDEAL_ATTR                Sales deal                                               
    0SALESDEAL_TEXT                Sales deal                                               
    0SALESORG_ATTR                 Sales organization                                       
    0SALESORG_TEXT                 Sales Organization                                       
    0SALES_DIST_TEXT               Sales district                                           
    0SALES_GRP_TEXT                Sales Group                                              
    0SALES_OFF_TEXT                Sales Office                                             
    0SCHD_CATEG_TEXT               Schedule line category                                   
    0SHIP_POINT_TEXT               Shipping point/receiving point  
    In BW
    Base Unit of Measure     0BASE_UOM
    Bill-to party                    0BILLTOPRTY
    Calendar Day                  0CALDAY
    Calendar Year/Month      0CALMONTH
    Calendar Year/Week      0CALWEEK
    Change Run ID              0CHNGID
    Company code              0COMP_CODE  
    Cost in statistics currency          0COST_VAL_S
    Credit/debit posting (C/D)            0DEB_CRED
    Distribution Channel       0DISTR_CHAN
    Division                                     0DIVISION 
    Number of documents    0DOCUMENTS
    Sales Document Category          0DOC_CATEG
    Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
    Number of Document Items         0DOC_ITEMS
    Fiscal year / period
    Fiscal year variant                      0FISCVARNT
    Gross weight in kilograms           0GR_WT_KG
    Number of Employees    0HDCNT_LAST
    Material                                     0MATERIAL
    Net value in statistics currency    0NET_VAL_S
    Net weight in kilograms 0NT_WT_KG
    Open orders quantity in base unit of measure 0OPORDQTYBM
    Net value of open orders in statistics currency 0OPORDVALSC
    Payer                            0PAYER
    Plant                             0PLANT
    Quantity in base units of measure 0QUANT_B
    Record type                   0RECORDTP
    Request ID                    0REQUID
    Sales Employee            0SALESEMPLY
    Sales Organization         0SALESORG
    Sales group                   0SALES_GRP
    Sales Office                   0SALES_OFF
    Shipping point                0SHIP_POINT
    Ship-To Party                0SHIP_TO
    Sold-to party                  0SOLD_TO
    Statistics Currency                    0STAT_CURR
    In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
    Thanks in advance,
       Bhima.
    Message was edited by: Bhima Chandra Sekhar Guntla

    Hi,
    <i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
    I think, you are looking for master data sources(text,attributes,hier).Am i right?
    If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
    Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
    With rgds,
    Anil Kumar Sharma .P

  • How to know which interfaces are going to which switch?

    How to know which interfaces are going to which switch ?
    I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
    Regards,
    Chandu

    I don't want to the end devices location.
    For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
    So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
    Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not  help because it will hold the information of ports that are up.
    Regards,
    Chandu

  • How to know which table in the database a form is accessing

    Actually Im new to oracle applications,
    Im getting an error when i open a form from system administrator responsibility saying that table doesnot exist.
    My basic doubt is, how to know which table in the database a form is accessing.
    Any response is higly appreciated.
    Thanks,
    Praveen
    Edited by: user10239520 on Sep 10, 2008 7:07 AM

    Take a look at the following thread:
    Is there a query log in EBS?
    Re: Is there a query log in EBS?

  • HT2173 How to know when a hard drive has failed ?

    How to know when a hard drive has failed ?

    Machine doesn't boot.  You experience strange crashes.  Gets wrong results.  Your harddrive is five or more years old.  Time to consider repacing it.   You do have backup?
    You may want to run these "standard" fixes if the problem persists.
    1) Check the amount of free space on your harddrive.  You should have a several gigs free.
    2) You should run disk utility
         a) verify the disk
         b) update your permissions.
    3) Try a safe boot.
        Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile Wait awhile while you harddrive
          is being checked.
        http://support.apple.com/kb/ht1455
    4) You may want to run applejack to clean up your machine.
         http://applejack.sourceforge.net/
    a lot more ways to fix your Mac.
    http://www.thexlab.com/faqs/faqs.html
    verify & repair your startup drive
    To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
    This article  will tell you how to get to disk utility.  Once in a disk utility, you can go and attempt to recover the disk.
    http://support.apple.com/kb/TS1417
    To repair your startup drive, you will need to run disk utility from your startup DVD.
    Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
    http://support.apple.com/kb/HT2055
    How to run disk utility from your startup DVD.
    Insert your  startup DVD  into your reader.  Power down your machine.  Hold down to the c key.  Power on your machine.  This will bootup your startup DVD.
    This will bring you to a panel asking you for your language.  Pick your language.
    You you come to the Install Mac OS panel.  Do not install.
    Click on Utilities menu item.  This will give you a pulldown list of utilities.
    Click on the disk utility.
    You are now in disk utility.  Pick your disk.  Click on repair it should be on the lower right of the panel.
    Once the repair completes successfully, you should update your permissions.
    Verify a disk
    As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
    I suggest that you use disk utility to verify that your startup disk is OK. 
    Macintosh-HD -> Applications -> Utilities -> Disk Utility 
    Start up disk utility.  On the left pane view, you will see a list of all your disks.  
    Click on your startup disk.
    Click on the First Aid  Tab.
    Click on verify.  
    Hopefully your disk will verify.  If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

  • How to know which port is being used by which process

    Hi,
    Could you please tell me how to know which port is being used by which process.as iam getting ports are already in use.
    Thank you,
    Sravan
    Message was edited by:
    sravan123

    Your OS might provide a command to support this question like '"netstat".
    Besides, on Unix the pseudo-file system /proc is also useful.

  • How to know whether balance carry forward has happened or not

    How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

    If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
    If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
    You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a  previous fiscal year are automatically carried forward to the current year after that initial run.

  • How I know which manageability tools(Oracle Change Management Pack,Oracle C

    Dear all,
    How I know which manageability tools(Oracle Change Management Pack,Oracle Configuration Management Pack,Oracle Diagnostic Pack,Oracle Tuning Pack, etc.) are installed on my oracle databases? Is there v$view to look at? Thank you in advance for your help.

    The usual method is described in http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF

  • How to know which object is in which transport requeset

    hi frnds
    how to know which object is in which transport request

    hi Preethi
    try with transaction se01 then clic on the tools icon under the menu you will get a list of function.
    then select search for object in transport request (maybe the text is a bit different) then enter information like for example R3TR  OSOA and the name of a datasource. if you don't know the meaning of R3TR use the match code and use it also for objects you want to find infosource infoobject etc... don't forget to mark the flag select if your transport request is released or not and then execute you will get the list of all transport requests containing your search object.
    hope this could help you
    best regards
    Boujema

  • How to know which type of jdbc driver used in my application

    How to know which type of jdbc driver used in my application.

    My approach will be....
    Type1: you have to have ODBC s/w install on your machine...even the connection string starts with jdbc:odbc....so it can be identifed easily
    Type2: you have to install client s/w in your machine...if you are using oracle oci driver ...you need to install oracle client s/w
    Type3: you use servername / port to connnect to middleware
    Type4: you do not need any client s/w
    So, If your application works without any client s/w on your machine....you might be using Type4/Type3 driver.....otherwise Type2
    Someone pls add more ....

  • How to know which type of apple device am using

    how to know which type of apple device am using

    Check iPad model with the Serial Number
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Settings>General>About>Serial Number

  • How to display which folders a photo has been assigned to

    If you select a photo in an Event and want to know which folders you've previously added that photo to, can you tell? I've looked at the iPhoto shortcuts page and don't see anything there. In Address Book, if you want to know which Groups a contact has been assigned to, you highlight the Contact and press Command-Option. But that doesn't work in iPhoto.

    This sure would be a handy feature! iTunes has it so that you can easily tell which playlists a song is in. It would be convenient for iPhoto as well.

  • How do know which services use up my data on my tablet? 2:How can I avoid this?

    How do know which services use up my data on my tablet? 2:How can I avoid this?

        @mwbail2,
    Great question! Managing your data usage is definitely important. You can view what apps are using data by going to Settings and then Mobile data on your phone. There is will show you the apps using data.
    If you want to avoid the data usage on the apps you want to make sure you close out the apps when not in use. You can also make sure that they are not automatically updating whenever there is a new update to the app. To do this simply go to the Play Store and select Menu. Then go to Settings and there you will see the option to change the auto update to update over wifi only.
    If you want to complete turn off data, just go to Settings and then mobile network and turn it off. Keep me posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • How to know which apple id is used to activate iphone?

    I have iphone 4 which is second hand phone. So how to know which apple id is used to activate iphone. My id or first owner's id.

    As i told i do not him, means where he will be, and i do not have his number. Is there any method to that is my id is used to activate iphone or other's id, without putting my iphone in activation lock.

Maybe you are looking for