How to launch integration builder with IE proxy?

Hi,gurus:
Our XI server is in remote side, so we have to set the IE proxy while launching integration server.But as you know,the integration builder woud not be launched successfully with IE proxy.So how can we deal with it?
Any help will be appreciated!

Hi,
The error message is "unable to launch integration builder" ,which all of us might have ever met.
I think it is the cause of IE proxy,but we have to set the proxy to get the environment from remote XI server.
I have referenced note 800267,but it seems of no avail.
Any ideas?

Similar Messages

Can't Launch Integration Builder, help me.

I downloaded Full ABAP Edition of SAP NetWeaver Sneak Preview and Trial, after install, I wanna develop XI-CONTENT, but cann't Launch Integration Builder, always open 'SapWorkDir' directory, but no error message showed, status bar print "starting browser...". And I did not using J2ee Server, only ABAP edition, of course J2SE 1.4.2.12 has been installed.
I do not known why , thanks for any help.
by the way I looked Syslog, there always a "Communications data: Service initialization failed" message each time I start NSP instance, but every things seems ok.

Hi,
Just adding on to what Michal said,
SDN has recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
But for XI we need both the Java and Abap stacks and not just having them individually, because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products and get a clear idea on the same:
http://www.howforge.com/news/sneap-prevew-sap-netweaver-04-sp15-java-abap
And incase you had installed XI or PI has Michal suggested then probably the solution provided by Ben will be useful..
I hope this clears your doubt....
Regards,
Abhy

Problem Launching Integration Builder

Hi XI Gurus,
I am getting Problem with Launching Integration Builder
I Installed XI SP15, I am able to launch IB from server where I installed XI, but not able to launch IB from different machines in my network, I tried different possible scenarios which are available in sdn . like setting webstart preferences ,clearing cache of webstart, playing with Administration tool by Re-Initialization, Re-Initialization and force-signing, and delete lock, added Sysetem IP in dispatcher services binding,I tried, tried ............. now I am tired.
Please help me now I am struck.
Thanks!
Kindest Regards
Srinivas Ayyala

Hi Aravind and Michal,
thanks for your timely reply, I tried with IP Address in browser too and i forgot one more thing I did in my POST
when i tried with wrong userID and password I am getting message stating that not authenticated
now i configured my webstart for log
I Got this message in my log file
Logging to file: C:\WebStartLog\webstartproblem
INFO: using logging implementation "Dual SAP/AII Logging"
INFO: log configuration file "C:\Documents and Settings\vsshetty\Desktop\log.properties" could not be read
INFO: using simple log configuration
<<< frog.jar: version 5.1.4 08/20/04 sap.theme: Streamline >>>
java.lang.NoClassDefFoundError: com/sap/engine/services/security/server/AuthenticationContextImpl
 at com.sap.engine.services.security.login.SecuritySession.expire(SecuritySession.java:236)
 at com.sap.engine.services.security.login.SecuritySession.setExpirationPeriod(SecuritySession.java:316)
 at com.sap.engine.services.security.login.TicketGenerator.getSecuritySession(TicketGenerator.java:127)
 at com.sap.engine.services.security.login.SecurityContext.load(SecurityContext.java:234)
 at com.sap.engine.services.rmi_p4.Message.loadContextObject(Message.java:343)
 at com.sap.engine.services.rmi_p4.Message.parseMessage(Message.java:239)
 at com.sap.engine.services.rmi_p4.Message.getByteArrayInputStream(Message.java:314)
 at com.sap.engine.services.rmi_p4.Call.getResultStream(Call.java:183)
 at com.sap.engine.services.security.remote.login.RemoteLoginContextHelper_Stub.login(RemoteLoginContextHelper_Stub.java:126)
 at com.sap.engine.services.security.remote.login.RemoteLoginContext.login(RemoteLoginContext.java:140)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.logonWithoutTicket(EJBHomeFactory.java:503)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:354)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:117)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:314)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:216)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:172)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:166)
 at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
 at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
 at java.awt.event.InvocationEvent.dispatch(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

Launch Integration Builder

Hi,
I am new to XI Having problem in launching INTEGRATION BUILDER which I am getting message 'web pages not found'.
My web address is like "http://pi71server1:50000/dir/start/index.jsp".
But my configuration settings in 'SXMB_ADM' > Integration engine configuration> parameters: IS_URL current value dest://SAPISU_XID.
I know I am missing some thing here. And also I have taken care on JAVA WEB START.
But I coundnt stat 'Integration Builder'.
Could some one please let me know where exactly I am missing.
Thanks,
Deepak.

Hi Deepak,
I think the problem with JAVA Version,which version of jre installed on your machine,use 1.5 version,it wl work fine.
Are you able to access ABAP Stack?? if yes then the problem with JRE only.
Regards,
Raj

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

Unable to Launch Integration Builder: Java Web Start problem

Hi,
I am unable to launch the integration builder. I am using JDK 1.4.2_05. The java Web Start gives the following error:
Unsigned application requesting unrestricted access to system
Unsigned resource: http://<XIHostName>:50000/rep/repository/aii_util_rb.jar
I have tried deleting the Java web start cache, and even reinstalling the JDK.
Can someone suggest a workaround this problem ?
thanks,
Manish

The Java Web Start cannot accept unsigned jars. If the jars are signed, it will ask in a dialog box if it should allow unrestricted access to this jar.
In my case, I upgraded XI SP0 to SP4, which included updating the Adapter Core, Adapter Framework, and the XI TOOLS to SP4.
On launching the Web start, it seemed that the jars were not getting signed. JWS cannot allow unsigned jars to the client.
These jars are maintained in:
\usr\sap\<SID>\SYS\global\xi\directory_server\javaws\directory
I am having problems with my XI upgrade to SP4, and it is probably not signing the jars.
Do you know why this may be happening ...
thanks,
Manish

How to configure Integration Builder using an Integration Process?

Dear experts,
I have problems configuring the Integration builder using a Integration process.
Scenario = idoc to PI, integration process transforms idoc to file, file to external system.
My integration process starts with an abstract interface (structure of idoc) and ends with an abstract interface (structure of file). But I just can not configure the integration builder correctly...
I did it as follows:
Sender agreement: comm.component = SAP system; interface = Idoc;
receiver determination: comm.component = SAP system; interface = Idoc; configured receiver = my integration process;
interface determination: comm.component = SAP system; interface = Idoc; receiver = target system comm.component;
Receiver agreement: comm.component = SAP system; receiver = target system comm.component; interface = filestructure of target
This does not work unfortunately. How can I pass the Idoc to my abstract interface? And how can I pass the result of my integration process (abstract interface) to the inbound interface? In the interface determination I can not select my Operation Mapping (but that should not be nessesary as I already created an Integration Process)...
Hope anyone can help.
Thanks and regards
William

Just consider your BPM is receiver, and sender:
Src --> BPM (BPM is Receiver)
==========
Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
Commnunication Channel
Receiver Determination
Interface Determination
BPM --> Target (BPM is sender)
============
Receiver Determination
Interface Determination
Communication Channel
Receiver Agreement
If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
Hope this clear your doubts
Liang

How do I run Safari with a proxy on start up by command line?

Hello,
I am using a piece of software called Sahi to perform automated testing of websites. It uses a local proxy to accomplish this task, so it runs the browser with parameters needed so that that instance of the browser is running with the proxy settings. For some reason it's not correctly setup by default with Safari on the Mac. But it has a configuration file where you can set the command line parameters that it runs the browser with.
So when I use Sahi in its default configuration, it doesn't work because the proxy is not configured, and I get an error ( http://sahi.co.in/forums/discussion/4607/sahi-doesn039t-work-with-safari-5-0-1-o n-macosx )
So I need to set the proxy. When I set the 127.0.0.1:9999 proxy in the System Preferences it works. My question is how do I run Safari so that it provides the proxy settings as a command line option?
This way I can add the command line option to the Sahi configuration file so that it runs Safari properly. I don't want to have the proxy settings system wide because I need other programs to work. I don't want to have the proxy settings set for Safari permanently because I also need to be able to run Safari normally outside of this special context.
Any assistance would be appreciated.

I should mention this is Safari 5.0.1

Launch Integration Builder - Checking version

I have recently received a new laptop at work.
When I launch the Integration Builder: Design and Integration Builder: Configuration from the web page, it says checking for latest version before actually launching the application and this takes ages.
Is there anyway to stop this happening. It didn't do this on my old machine.
We are on XI3.0 (sp12), I am have JAVA 1.4.2_08 on my machine.

hi,
try moving content of 2 folders from:
C:\Documents and Settings\youruser\Application Data\Sun\Java\Deployment\javaws\cache\http\DXISERVER\PJ2eeport
to some other location
when next time you'll log to IB java will be loaded again
and this may help you
Regards,
michal

Help - How to invoke Integration Builder

Hello Gurus,
It's a great forum to know more about XI, scenarios, blogs etc. I have a very simple question as a basic for all the scenarios -
How to invoke / start integration builder and integration repository. I am getting message "Integration Builder address not maintained" while running the SXMB_IFR.
Any comments, pointers will be great.
regards,
Sm

Hi Sri,
1) Were you able to open in exchange profile?
To findout, try the following URL
http://<hostname>:<port>/exchangeProfile
2) Make sure to check connection parameters in Exchange Profile and the following values are set
com.sap.aii.connect.repository.name
com.sap.aii.connect.repository.httpport
3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
Also complete all your post installation activities.
Also go through these links which will surely help you.....
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Integration Builder Address not maintained
Regards,
Abhy

Unable to open/launch Integration Builder.

Hi,
I am unable to open Integration Builder.
Once I click on the link "integration directory", User Id and Password screen appears and when I enter the correct user ID and Password, Nothing happens, only the" Wait" icon appears for ever.
I understand that itu2019s something to do with our access in my machine. We have stiff security policies.
In internet explorer setting --> I have "Accept all Cookies" and also Pop-ups are not blocked (as Privacy setting)
Please help me to resolve this issue.
Regards,
Rehan

Nothing happens, only the" Wait" icon appears for ever.
Please check with your basis if there in any space issue in the server.Also check if your other mates can open the Builder or not.
Go to control panel->java->general->delete temp internet files and try lauching.
If there is any issue with java webstart the
Check /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support .
Go to integration Builder ->Administration tab ->Java webstart administration.>Reinitialize
Regards,
Srinivas
Edited by: Srinivas on May 5, 2010 11:58 AM

How to launch an application with elevated administrator account privilege from windows service even if the account has not yet logon

Here is the case:
OS environment: Windows 7
There are two user accounts in my system, standard user "S" and administrator account "A", and there is a windows service running with "Local System" privilege.
Now i logged-in with account "S", and i want to launch an application with elevated administrator account "A" from that service program, so here is the code snippet:
int LaunchAppWithElevatedPrivilege (
LPTSTR lpszUsername, // client to log on
LPTSTR lpszDomain, // domain of client's account
LPTSTR lpszPassword, // client's password
LPTSTR lpCommandLine // command line to execute e.g. L"C:\\windows\\regedit.exe"
DWORD dwExitCode = 0;
HANDLE hToken = NULL;
HANDLE hFullToken = NULL;
HANDLE hPrimaryFullToken = NULL;
HANDLE lsa = NULL;
BOOL bResult = FALSE;
LUID luid;
MSV1_0_INTERACTIVE_PROFILE* profile = NULL;
DWORD err;
PTOKEN_GROUPS LocalGroups = NULL;
DWORD dwLength = 0;
DWORD dwSessionId = 0;
LPVOID pEnv = NULL;
DWORD dwCreationFlags = 0;
PROCESS_INFORMATION pi = {0};
STARTUPINFO si = {0};
__try
if (!LogonUser( lpszUsername,
lpszDomain,
lpszPassword,
LOGON32_LOGON_INTERACTIVE,
LOGON32_PROVIDER_DEFAULT,
&hToken))
LOG_FAILED(L"GetTokenInformation failed!");
__leave;
if( !GetTokenInformation(hToken, (TOKEN_INFORMATION_CLASS)19, (VOID*)&hFullToken,
sizeof(HANDLE), &dwLength))
LOG_FAILED(L"GetTokenInformation failed!");
__leave;
if(!DuplicateTokenEx(hFullToken, MAXIMUM_ALLOWED, NULL,
SecurityIdentification, TokenPrimary, &hPrimaryFullToken))
LOG_FAILED(L"DuplicateTokenEx failed!");
__leave;
DWORD dwSessionId = 0;
WTS_SESSION_INFO* sessionInfo = NULL;
DWORD ndSessionInfoCount;
bResult = WTSEnumerateSessions(WTS_CURRENT_SERVER_HANDLE, 0, 1, &sessionInfo, &ndSessionInfoCount);
if (!bResult)
dwSessionId = WTSGetActiveConsoleSessionId();
else
for(unsigned int i=0; i<ndSessionInfoCount; i++)
if( sessionInfo[i].State == WTSActive )
dwSessionId = sessionInfo[i].SessionId;
if(0 == dwSessionId)
LOG_FAILED(L"Get active session id failed!");
__leave;
if(!SetTokenInformation(hPrimaryFullToken, TokenSessionId, &dwSessionId, sizeof(DWORD)))
LOG_FAILED(L"SetTokenInformation failed!");
__leave;
if(CreateEnvironmentBlock(&pEnv, hPrimaryFullToken, FALSE))
dwCreationFlags |= CREATE_UNICODE_ENVIRONMENT;
else
pEnv=NULL;
if (! ImpersonateLoggedOnUser(hPrimaryFullToken) )
LOG_FAILED(L"ImpersonateLoggedOnUser failed!");
__leave;
si.cb= sizeof(STARTUPINFO);
si.lpDesktop = L"winsta0\\default";
bResult = CreateProcessAsUser(
hPrimaryFullToken, // client's access token
NULL, // file to execute
lpCommandLine, // command line
NULL, // pointer to process SECURITY_ATTRIBUTES
NULL, // pointer to thread SECURITY_ATTRIBUTES
FALSE, // handles are not inheritable
dwCreationFlags, // creation flags
pEnv, // pointer to new environment block
NULL, // name of current directory
&si, // pointer to STARTUPINFO structure
&pi // receives information about new process
RevertToSelf();
if (bResult && pi.hProcess != INVALID_HANDLE_VALUE)
WaitForSingleObject(pi.hProcess, INFINITE);
GetExitCodeProcess(pi.hProcess, &dwExitCode);
else
LOG_FAILED(L"CreateProcessAsUser failed!");
__finally
if (pi.hProcess != INVALID_HANDLE_VALUE)
CloseHandle(pi.hProcess);
if (pi.hThread != INVALID_HANDLE_VALUE)
CloseHandle(pi.hThread);
if(LocalGroups)
LocalFree(LocalGroups);
if(pEnv)
DestroyEnvironmentBlock(pEnv);
if(hToken)
CloseHandle(hToken);
if(hFullToken)
CloseHandle(hFullToken);
if(hPrimaryFullToken)
CloseHandle(hPrimaryFullToken);
return dwExitCode;
I passed in username and password of account "A" to method "LaunchAppWithElevatedPrivilege", and also the application i want to launch, e.g. "C:\windows\regedit.exe", but when i run the service program, i found it do launch
"regedit.exe" with elevated account "A", but the content of regedit.exe is pure back. screenshot as below:
Can anyone help me on this?

You code is not dealing with the DACL access to Winsta0\Default. Only the LocalSystem account will have full access and the interactively logged on user which is why regedit is not displaying properly. You'll need to grant access to your user.
You also need to deal with UAC since that code is going to give you a non-elevated token via LogonUser(). You need to get the full token via a call to GetTokenInformation() + TokenLinkedToken.
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK.

How to launch an adapter with an external software ?

Hi everybody,
Is it possible to launch an adapter thanks to an EXTERNAL tools (software or Java program)? and how ?
But... I have some constraints: :-((
- no use of BPM
- no use of PCK
- no use of "poll interval" option for a file adapter
- no use of a Plain J2SE decentralized Adapter Engine
- Adapters are these one of Integration Service's AE and especially: File, JDBC, SOAP.
Example: I defined a sender file adapter which take a file inside a folder and give it to XI (cf. IR). But with all my constraints, I don't know how I can launch this "sleeping" actived adapter.
Any helps/ideas are welcome !
Mickael

Hi,
Yes, you understood my problem: it's just to trigger an adapter with a remote call.
In fact, one want to find an easy solution for end-user. For them, it's just (thanks to a button) "I want to send my data to R/3" and that's all... They don't know that their data are inside a file or a table or a web service and they don't know that there is XI !
Ananth, the HTTP solution is not efficient for us, because HTTP program needs to read a CSV file and transform it to a XML message before sending to XI. Thus in this case, it would be like if you RE-create the functionalities of a File Adapter in another system, whereas this one exist in standard in XI => No interresting!
Mickael

How can I integration BPM with OWC spaces

I use BPM 11g PS4 (11.1.1.5) and I want to integrate my process spaces and displayed in webcenter spaces.
I read and practice from http://andrejusb.blogspot.com/2011/02/bpm-portal-11g-ps3-how-to-configure.html and http://andrejusb.blogspot.com/2010/11/bpm-portal-how-to-configure-oracle-bpm.html
but version of bpm in two link is bpm 11g ps3 (11.1.1.4) .
I step by step configuration but it's doesn't work with my bpm version.
Please answer me if who was resolve the same issue :-) . Thanks.

Are you saying non of the build-in templates in the iPhoto>Share>email is adequate ?

How to use Flex builder with blazeds and JBoss

Following the instructions it is pretty easy to set up a project to work with the turnkey tomcat. However, I am having problems with JBoss because the app has to be deployed as a .war file. I can create a war file manually and depoly it no problem. How do I get flex builder to deploy to a war file? I want to be able to debug in flex builder and run at the click of a button.

Hi, I am trying to configure BlazeDS with JBOSS Application Server. I have downloaded BlazeDS binary version - blazeds_bin_3-0-0-544.zip from Adobe. But in the installation steps, it says that copy blazeds.war, samples.war and console.war into <JBOSS_HOME>/server/default/deploy folder. But in this zip, it contains only blazeds.war file only. I have copied it to <JBOSS_HOME>/server/default/deploy folder. I have restarted JBoss. I didn't get any error. But when i give http://localhost:8080/blazeds ... i am always getting "Page not found 404" error. Please help me, if you have detailed steps to configure BlazeDS on JBoss. Thanks for your time.

How to launch integration builder with IE proxy?

Similar Messages

Maybe you are looking for