How to layout constraint rows and columns "right"?

Hi.
I have a complex constraint layout with 8 columns and 11 rows. Since this layout is not an MXML-file, I need to do it in actionscript. Is there a "best pratice" on how to layout this without the Design view in Flash Builder?
Is it possible to display the columns and rows like in HTML, where I could say "border=1" or use css?
Regards,
Jo

What makes you think that it is not there? Any form which doesn't have the same set of members across rows and dimensions are asymmetric.
Asymmetric rows and columns contain different sets of members selected across the same dimensions
Oracle Hyperion Planning, Fusion Edition Administrator's Guide
I can add a column with only Q1 and then another column with Q2, Q3, Q4 which will make it an asymmetric form. Keep in mind not to check "Place selection in separate columns".
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to preserve a row and column in numbers automatically.ie the cells are not consecutivecell a1 a3 etc

working on a league table
when sorting the league table ,I need to preserve the row and column
I can preserve row and column by using the drop down menu on every cell,but would like to do it automatically(2 clicks to every cell)
working in numbers
yosemite 10.2

This technique would be quite slow. Unfortunately, it's the only way I could think of if it's really an Excel file. If it's tab delimited file, you could read a whole thing into 2D array and work on Array instead of reading cell-by-cell.

How can I print row and column headings?

In AW6 I was able to select Appleworks in the print window and check if I wanted to print row and/or column headings. I have not been able to find how to do this in Numbers. Can anyone tell me how?
Paco

Paco wrote:
I have not been able to find how to do this in Numbers.
Perfectly logical, the feature is unavailable.
Workaround:
Use a row header and a column header to mimic the missing feature.
In cell B1 I entered
=CHAR(CODE("A")-1+COLUMN())
and applied fill to the right
CAUTION, this formula is OK only from colum B thru column Z.
In cell A2 I entered
=ROW()
and applied Fill Down
Then convert column A as header one
convert row A as header one.
Yvan KOENIG (from FRANCE dimanche 22 février 2009 12:28:34)

How to get the Row and Column values in ALV (without using Objects)

Hi All,
I need to get the Row / Column when double click is used in ALV, I can use the double click event for this. However, I do not want to use the Object Oriented ALV. I want to implement the same functionality using general (using functions) ALV.
Is there any way to get the row / column values for a Generia (non-OOPs) ALV report.
Please help.
Thanks,
Vishal.

Hello,
The only think you have to do is to get the index where the user clicked, and then read the internal table you sent to the alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = 'prg_name'
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND' " this is to the click event!!
      i_callback_top_of_page   = 'TOP_OF_PAGE'
      is_layout                = alv_layout
      it_fieldcat              = alv_fieldcat
      i_save                   = 'A'
      it_events                = alv_events[]
    TABLES
      t_outtab                 = i_totmez. ---> TOUR IT.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
" then....
FORM user_commandUSING r_ucomm     TYPE sy-ucomm
                                ls_selfield TYPE slis_selfield.
" r_ucomm -> HAS THE STATUS
" ls_selfield-tabindex -> HAS THE SELECTED INDEX
" THEN READ THE INTERNAL TABLE
" HERE YOU WILL HAVE THE SELECTED ROW
READ TABLE i_totmez INDEX ls_selfield-tabindex.
ENDFORM.
cheers,
Gabriel P.

Method to locate row and column in TableView

In a TableView.setOnMouseClicked ()
How to capture that row and column were clicked?

I am having problem in populating data from a table in one screen to a Text Field in the other screen. I have two classes FirstClass containing a textbox and a button. On pressing a button a second window is opened containing a Table of values. As the user double clicks a row the value of the second column of the row should be inserted into the textbox of the FirstClass. Code of both the classes is attached. Thanking you in anticipation.
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.scene.layout.StackPane;
import javafx.stage.Stage;
public class FirstClass extends Application {
public static void main(String[] args) {
     launch(args);
@Override
public void start(final Stage primaryStage) {
     primaryStage.setTitle("First Class");
GridPane gridpane = new GridPane();
          gridpane.setPadding(new Insets(5));
          gridpane.setHgap(5);
          gridpane.setVgap(5);
final TextField userNameFld = new TextField();
gridpane.add(userNameFld, 1, 1);
Button btn = new Button();
btn.setText("Show Table");
gridpane.add(btn, 1, 3);
btn.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent event) {
     String a = TableClass.showDialog(primaryStage, true, "Table Window" );
     userNameFld.setText(a);
StackPane root = new StackPane();
Scene scene =new Scene(root, 300, 250);
root.getChildren().addAll(gridpane);
primaryStage.setScene(scene);
primaryStage.show();
import javafx.beans.property.SimpleStringProperty;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableView;
import javafx.scene.control.cell.PropertyValueFactory;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.GridPane;
import javafx.scene.layout.StackPane;
import javafx.stage.Modality;
import javafx.stage.Stage;
public class TableClass extends Stage {
     private static TableClass dialog;
     private static String value = "";
     public static class Person {
private final SimpleStringProperty firstName;
private final SimpleStringProperty lastName;
private Person(String fName, String lName) {
this.firstName = new SimpleStringProperty(fName);
this.lastName = new SimpleStringProperty(lName);
public String getFirstName() {
return firstName.get();
public void setFirstName(String fName) {
firstName.set(fName);
public String getLastName() {
return lastName.get();
public void setLastName(String fName) {
lastName.set(fName);
     private TableView<Person> table = new TableView<Person>();
     private final ObservableList<Person> data =
     FXCollections.observableArrayList(
     new Person("JACK", "BROWN"),
     new Person("JOHN", "VIANNEYS"),
     new Person("MICHAEL", "NELSON"),
     new Person("WILLIAM", " CAREY")
     public TableClass(Stage owner, boolean modality, String title) {
          super();
          initOwner(owner);
          Modality m = modality ? Modality.APPLICATION_MODAL : Modality.NONE;
          initModality(m);
          setOpacity(1);
          setTitle(title);
          StackPane root = new StackPane();
          Scene scene = new Scene(root, 750, 750);
          setScene(scene);
          GridPane gridpane = new GridPane();
          gridpane.setPadding(new Insets(5));
          gridpane.setHgap(5);
          gridpane.setVgap(5);
          TableColumn firstNameCol = new TableColumn("First Name");
     firstNameCol.setMinWidth(100);
     firstNameCol.setCellValueFactory(
     new PropertyValueFactory<Person,String>("firstName")
     TableColumn lastNameCol = new TableColumn("Last Name");
     lastNameCol.setMinWidth(200);
     lastNameCol.setCellValueFactory(
     new PropertyValueFactory<Person,String>("lastName")
     table.setItems(data);
     table.getColumns().addAll(firstNameCol, lastNameCol);
     table.setOnMouseClicked(new EventHandler<MouseEvent>() {
               public void handle(MouseEvent me) {
                    if (me.getClickCount() >= 2) {
               String srr = table.getItems().get(table.getSelectionModel().getSelectedIndex()).getLastName();
               value = srr;
               dialog.hide();
     gridpane.add(table, 1, 5,1,20 );
          root.getChildren().add(gridpane);
     public static String showDialog(Stage stg, Boolean a , String title){
          dialog = new TableClass( stg,a, title);
          dialog.show();
          return value;
}

JTable fixed Row and Column in the same window

Hi
Could anyone tip me how to make fixed row and column in the same table(s).
I know how to make column fixed and row, tried to combine them but it didnt look pretty.
Can anyone give me a tip?
Thanks! :)

Got it to work!
heres the kod.. nothing beautiful, didnt clean it up.
* NewClass.java
* Created on den 29 november 2007, 12:51
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package tablevectortest;
* @author Sockan
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
public class FixedRowCol extends JFrame {
Object[][] data;
Object[] column;
JTable fixedTable,table,fixedColTable,fixedTopmodelTable;
private int FIXED_NUM = 16;
public FixedRowCol() {
    super( "Fixed Row Example" );
    data = new Object[][]{
        {      "","A","A","A","",""},
        {      "a","b","","","",""},
        {      "a","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "I","","W","G","A",""}};
    column = new Object[]{"A","B","C","D","E","F"};
    AbstractTableModel fixedColModel = new AbstractTableModel() {
      public int getColumnCount() {
        return 1;
      public int getRowCount() {
        return data.length;
      public String getColumnName(int col) {
        return (String) column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel    model = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col+1];
      public Object getValueAt(int row, int col) {
        return data[row][col+1];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col+1] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedTopModel = new AbstractTableModel() {
      public int getColumnCount() { return 1; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedModel = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return FIXED_NUM; }
      public Object getValueAt(int row, int col) {
        return data[row + (data.length - FIXED_NUM)][col+1];
    table = new JTable( model );
    table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTable = new JTable( fixedModel );
    fixedTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedColTable= new JTable(fixedColModel);
    fixedColTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedColTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTopmodelTable = new JTable(fixedTopModel);
    fixedTopmodelTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTopmodelTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    JScrollPane scroll      = new JScrollPane( table );
     scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     scroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    JScrollPane fixedScroll = new JScrollPane( fixedTable ) {
      public void setColumnHeaderView(Component view) {}
    fixedScroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    fixedScroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    JScrollBar bar = scroll.getVerticalScrollBar();
    JScrollBar dummyBar = new JScrollBar() {
      public void paint(Graphics g) {}
    dummyBar.setPreferredSize(bar.getPreferredSize());
    scroll.setVerticalScrollBar(dummyBar);
    final JScrollBar bar1 = scroll.getHorizontalScrollBar();
    JScrollBar bar2 = fixedScroll.getHorizontalScrollBar();
    bar2.addAdjustmentListener(new AdjustmentListener() {
      public void adjustmentValueChanged(AdjustmentEvent e) {
        bar1.setValue(e.getValue());
    JViewport viewport = new JViewport();
    viewport.setView(fixedColTable);
    viewport.setPreferredSize(fixedColTable.getPreferredSize());
    fixedScroll.setRowHeaderView(viewport);
    fixedScroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedColTable
        .getTableHeader());
    JViewport viewport2 = new JViewport();
    viewport2.setView(fixedTopmodelTable);
    viewport2.setPreferredSize(fixedTopmodelTable.getPreferredSize());
    scroll.setRowHeaderView(viewport2);
    scroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedTopmodelTable
        .getTableHeader());
    scroll.setPreferredSize(new Dimension(600, 19));
    fixedScroll.setPreferredSize(new Dimension(600, 100));
    getContentPane().add(     scroll, BorderLayout.NORTH);
    getContentPane().add(fixedScroll, BorderLayout.CENTER);
public static void main(String[] args) {
    FixedRowCol frame = new FixedRowCol();
    frame.addWindowListener( new WindowAdapter() {
      public void windowClosing( WindowEvent e ) {
        System.exit(0);
    frame.pack();
    frame.setVisible(true);
}

InDesign Tables: Row and Column Strokes

Using InDesign Tables: How do you get row and column strokes in a table to appear perfectly joined? When I choose "Column Strokes in Front" (Under Table Setup) i still see a tiny row stroke, and vice versus.. it's really visible in the PDF almost can't see it in InDesign though you can a little...any advice?

http://lawrence.ecorp.net/inet/samples/dhtml-rollover-tble-cols-rows.shtml

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to design rows and columns in sapscript layout

Hi friends,
Please let me know how to design rows and columns in sapscript layout with example?
Thanks,
Yogesh

Hi friends,
Please let me know how to design rows and columns in sapscript layout with example?
Thanks,
Yogesh

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How to layout constraint rows and columns "right"?

Similar Messages

Maybe you are looking for