How to learn shortcut command?

how do i learn to use my new mac pro retina?

Open System Preferences > Trackpad.
Here's a list of keyboard shortcuts:
OS X: Keyboard shortcuts - Apple Support

Similar Messages

  • How to resolve service command-key conflicts?

    Every time I type command-M to check mail in Eudora 6.2.4, I hear a system beep. This is not coming from Eudora, as I have alerts turned off. I thought it might be a service conflict and have tried Service Scrubber, but to no avail (spell catcher 10.2.3 has a shortcut command-shift-M for modify selection, but that's all I can find).
    Does anyone have any ideas? Services are a great idea in MacOS X, but how the system deals with hotkey conflicts leaves a lot to be desired!

    eudora 6.2.4 works fine for me, even command-M. but there is a thing on eudora's web site about sounds not working properly, if you have eudora's sounds selected. i dont remember that it said anything about fixing that problem by having alerts turned off.
    you might try going to preferences / keyboard and mouse / keyboard shortcuts and changing the check mail to 'control left arrow'. it's handy to just check the mail with 2 fingers next to each other.
    in any case, if the beep goes away... it might help you solve the problem. you can always put it back.

  • How to creat shortcut for ethernet on desktop in win 8

    how to create shortcut for Ethernet enable and disable
    because i have internet connected with LAN
    and it is has no internet disconnection option

    Hi,
    Here is the command you can write to the batch:
    To disable the interface, you'd then run:
    netsh interface set interface name="Local Area Connection” admin=DISABLED
    To enable the interface, you'd then run:
    netsh interface set interface name=“Local Area Connection” admin=ENABLED
    Note to find your  network interface, you can run
    netsh interface show interface command.
    Thanks!
    Andy Altmann
    TechNet Community Support

  • Dreamweaver Ultradev / Learning Site Command

    Has anyone ever used the Learning Site Command extension for Dreamweaver Ultradev?
    I'm trying to make a login page, 10 test pages, and a score page work together using an ORACLE 7x db connection. Does anyone know how to set the above scenario up?

    Has anyone ever used the Learning Site Command extension for Dreamweaver Ultradev?
    I'm trying to make a login page, 10 test pages, and a score page work together using an ORACLE 7x db connection. Does anyone know how to set the above scenario up?

  • How to run Terminal commands in Xcode?

    Anyone knows how to include Terminal commands ( like sudo) in Xcode?  for example in a line of my program I need to run this:
    sudo open/Library/Preferences/com.apple.sharing.firewall.plist
    I searched the library but found no class or routine for that.

    Well, I am not a professional programmer, but one of the things I continue to learn is how to wade through all of the Cocoa documentation (and it does get deep in spots).  Chances are though, no matter what you are trying to do, Apple or some third party has created a class to make it easier - you just have to find it.  My Xcode documentation bookmarks continue to grow, but you might start with some of Apple's documentation, such as
    Cocoa Fundamentals Guide
    Foundation Framework Reference
    Application Kit Framework Reference

  • I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

  • How to execute unix command in plsql block( urgent)

    Hi All,
    i want rename the unix folder to New name on update non_employee table . So, please give me idea how to use unix command here.... Please suggest me ASAP ... Its urgent
    CREATE or REPLACE TRIGGER NON_EMPLOYEE_AftUpd_trg
    AFTER UPDATE ON NON_EMPLOYEE
    FOR EACH ROW
    BEGIN
    IF :new.DIST_LIVELINK_PATH <> :old.DIST_LIVELINK_PATH THEN
    rename unixfolder1 to :new.dist_livelink_path.
    end IF;
    END;

    The solution will depend a lot on your Oracle version, which you forgot to mention ;)
    btw shouldn't that be (in pseudocode)
    rename :old.dist_livelink_path to :new.dist_livelink_pathotherwise it will always fail after the first time?
    In Unix that would require the mv command.

  • How to execute unix command line from cocoa?

    how to execute unix command line from cocoa?
    for example, if I want to call "ping" from cocoa, how should I do it? and how can I obtain the return value?
    thank you.
    Power G5 Quad Mac OS X (10.4.3)

    The following article may also help:
    http://cocoadevcentral.com/articles/000025.php
    Mihalis.
    Dual G5 @ 2GHz   Mac OS X (10.4.6)  

  • How to create shortcut desktop icon for all users???

    Hello All,
    I want to know how to create shortcut icon for all users in windows 7. I tried C:\Users\Public but no folder for Desktop.
    Thanks

    C:\users\All users
    JS
    Hi,
    I am just wondering, what is the technically correct location to place say, a shortcut, for all users to access on their desktops on a given machine?
    Is it C:\Users\Public\Desktop ?
    Or is it C:\Users\All Users\Desktop ?
    Would it also be possible to explain the differences as well? Or paste some links to the overview of each one? I am having trouble finding anything from MS.
    Thank you.

  • How can hide the command line of a t.code in the portal

    Dear Experts.
    I have the following doubt:
    How can hide the Command Line of a Report that is called with a T.Code in the portal?
    Attach Image:
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line  using
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
    But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
    The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
    In this moment I have used the two options:
    1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
    RESULT:
    SAP Web Application Server
             500 Connection timed out
            Error: -5
           Version: 7000
           Component: ICM
           Date/Time: Sat Jun 12 20:26:39 2010 
           Module: icxxthr_mt.c
           Line: 2698
           Server: xyxab...
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    2)  created an Iview Transaction  in the portal and  call my transaction.
    RESULT.
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    But not can hide the field Command Line and other buttons.
    I think that the command :
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    Only can be used if I create a service using the T.Code SICF .
    Best Regards
    Carmen.

    Hi Carmen,
    The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
    You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
    ~okcode=/nSU01
    And you can pass parameters in the same way:
    ~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
    By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
    Regards, Rory

  • How to break the command line in SAP scripts

    Hi,
      Can any one Please guide me how to continue the command line( /: ) of SAP SCPRIPT into multiple lines.
    Regards
    Kiran

    Hi Kiran,
    U can continue in the same line itself by pressing SHIFT+F8
    If u want it in the next line then u can give space in the tag column.
    Thanks,
    Vinod.

  • Keyboard shortcut Command-~ DOES NOT WORK in/on some apps/machines

    It seems that in Mac OS 10.6.2 the keyboard shortcut "Command-~" ( a.k.a.
    "⌘-~" or "Command-tilde") is quite fickle. It is used in most apps to
    switch between open windows within an application. It was available in OS
    10.5 in Safari, Microsoft Office (including Entourage), and most other apps
    with the capacity to open multiple windows simultaneously. But in OS 10.6.2
    this shortcut is available in Safari on my 2.16 GHz Core2Duo 20" iMac but
    NOT on my 2.4 GHz Core2Duo Unibody 13" MacBook; it's available in Entourage
    on my MacBook but NOT on my iMac. So it's available on some apps and some
    machines but not on others, there's no rhyme or reason to it, and it's not
    consistent between like machines and apps, which makes me think that there's
    a system-wide preference or command that could turn this on and off. I
    thought perhaps it was controlled by a preference in certain apps, but I
    have found no such prefs. Is there a way to control this - in other words,
    to make it available where it currently is not? Or is there a command to
    make it universally available on any 10.6 machine (my preferred solution)?
    Thanks for any help offered.

    Not a reply to this specific question, just a quasi-relevant comment that might help some folks.
    In Leopard, and with (for example) English and Russian chosen in System Prefs under "Language" and the keyboard shortcut set to command+space, I would always see the flag change in the menu bar as soon as command+space were chosen. Now, under Snow Leopard, hitting command+space seems not to make the change. But it does make the change, you just need to take your fingers off the keys first, then the flag will change.

  • How to create shortcut icons for settings

    how to create shortcut icons for settings

    I also have this issue. Apple has indicated they want to have a larger presence in businesses. VPN is a huge part of any business network. Frustrations are hightened by the VPN disconnecting whenever the device Auto-locks. We have a definite need to make VPN's on iPads less tedious...

  • How  to learn hr process

    pls provide the details wat type of quest ask to hr department bcoz i dont have the he domain knowedge & i boss sent to hr deparyment but no response from this side , plz guide how to learn the process .thanx in advence.

    Hi Gayatri,
    First of all let us know what exactly you are looking for?
    1) Are you looking for HR process   or
    2) You want to know the questions that are to be asked with the business users / end users , and based on that to start the business blue print for the implementation.
    If you are looking for Q&A to be sent to the end users then you have to search SDN and will find lots of Q&A . But try to understand the minimum process of HR activities that will happen in any Organization before going a head.
    In any Organization , HR role plays a vital and behaves as back bone to the Organization.
    Process involes , Hiring emloyees, Maintaining their data base, maintainig time attandance, running payroll, etc. Employee interaction and dealing with the employees benefits, dealing with their grievances, uplifting their morale etc are the main functions from HR perspective.
    This is just an overview of HR activities.
    Coming to SAP HCM Module, we deal with Recruitment, OM , PA , Time Management, Payroll, T&E , Travell Management and based on country specific modules like US Benefits etc.
    So our request is , confirm what you are looking for and let us know how we can add our inputs to your querry to give a clear picture.
    All the best.
    Regards,
    Sri..

  • How to learn if the security on my 2009 macbook pro has been compromised?

    how to learn if the security on my 2009 macbook pro has been compromised?

    just my curiosity if there is a way to check this question out?

Maybe you are looking for