How to leave space in every page in crystal report.

hi.
plz have a look on below image.
i have one problem i need your valuable suggestions..
I develop a layout i want to print this one on letter head ..
in letter head at page header all ready pre printed logos are there.
so, in my layout i all ready leave some space..at page header.
but i need at the next page also i want to leave some space..
i am getting confusion.
in my layout next page is also comming report section
plz have a look on below image..
Any solutions plz inform me..

Hi Srinivas,
Yes, you are right. If you put some space in report header it will effect only first page not second page, if you put some pace in page header it effects all pages.
As per your requirement, you have to insert space in page header so, it will effect in all pages.
If you don't want space to be printed in subsequent pages then we can suppress conditionally.
-Sastry

Similar Messages

How to load a web page into crystal report

How can i load a web page into crystal report? pls help
Thanks in advance

Hi Sebastin,
You can't open a webpage in your Crystal Report, because all webpages will be executed in browser only. If you insert any webpage link in any documents it will not open in the same document, it will open in browser.
Hope this will help you
Thanks,
Sastry

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

How do i create 2 parameter pages for 1 report?

Hi,
I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
my difficulty is how do i create 2 parameter page for 1 report?
thank you

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How to limit the no of records per page in crystal reports 2008

I have to limit the number of records =10 per page in crystal reports 2008.
Any help appreciated.

Hi,
1. Open the report in Design View
2. Right click on the Details section and select Section Expert
3. Make sure the Details section is selected in the Section Expert dialog box. goto paging tab
Check the box that says u201CNew Page Afteru201D
4. Click the formula editor button to the right of the checkbox.
5. Enter the following formula
if Remainder (RecordNumber, 10) = 0 then true else false
6. Click Save and Close and then click OK.
If you run the report it should break after each 10 rows.
@Sri
Edited by: Sri kamesh on Jun 22, 2011 1:50 PM

How to limit row number per group without change new page in crystal report

Hi All Expert,
Is there any way to limit row number per group without change new page in crystal report 2008. The reason i do that is due to customer using printer EPSON LQ 300 (dot matrix) always will print in landscape if detech my layout in landscape. Because they need the record always print in 1 page (Letter size) for 2 groups and each group must show 5 records. Example:
But, in CR2008, if you set the row per group from group section expert, definitely it will change to new page, but I do not want it change to new page. Any Idea?
In one page (Letter size):
Group Name: Customer-ABC
NO INVOICE AMOUNT
1)   INV001     USD100
2)   INV002     USD100
3)   INV003     USD100
4)   INV004     USD100
5)   INV005     USD100
Group Name: Customer-ABC
NO INVOICE AMOUNT
6)   INV006     USD100
7)   INV007     USD100
8)   INV008     USD100
9)   INV009     USD100
10) INV010     USD100

Hi Angie.....
I guess it is not possible.
Because if you have one common group for all the 10 records then in one page it will show 10 records under one group.
I mean i think it is not possible but m not completely sure......
Lets wait for expert advise....
Regards,
Rahul

How do we create a jndi connection in crystal reports XI

how do we create a jndi connection in crystal reports XI when the data soiurce is configured on websphere 6.1

You need to use WLST online. I am not sure what your exact requirements are but one good way of working this is to have a WLST script that deletes all your WL customisations, like connection pools, JMS Servers etc and then creates it. That way you can run the same script repeatedly and it will get everything up to date for you. However you have to remember that everytime you add something new you need to update your delete section. Also your deleting should not fail if the item does not exist. I hope that makes sense!
As to the specifics of WLST examples to do this then check out the WLST examples in CodeShare.
If you are still having issues then post another message.
Geoff

How to display subtotals in every page and the grand total in the last page

Hello Abapers,
I am working with Smartforms. I am not able to print the subtotal in every page ie the Price for that particular page alone should be summed and in the final page I want the grand total also to be displayed. I tried the Total option in the Calculations tab but the value is just getting incremented on every page..How can I achieve this..
With Regards,
Bennet.

Hi,
Declare two different variables for subtotal and total
Use them in the calculation tab of the table node.
After displaying the subtotal create a program lines node to clear the value of the subtotal. And dont forget to mention the condition in the condition tab of the text node of your subtotal as only before end of main window.
display the grand total in the text another text node with condition... only after end of main window.
regards
padma

How to refresh canvas on every page load?

Hi,
I have a <canvas> added for electronic signature. Electronic Signature using SAPUI5?
As there is no UI5 control I am adding the canvas from controller to xml view having <core:HTML id="signature" width="100%" />
When the page is loaded for the first time it works fine but on successive load of the page, canvas is not being refreshed with different signature. I am getting data from backend as OData but I cant bind the property so that on model change canvas would refresh.
How to fix the issue of canvas refresh on every page load?

Hi Dennis,
There is a slight error in your code: the last Undo button is missing a closing } for the press function, and the 'enabled' property contains a rogue comma, but other than that, kudo's for your work here!
Rashmi, it seems like Dennis Seah has created the perfect case on why you should consider writing your own custom control instead of using the standard <canvas> element

How to double space words in pages

I want to know how to double space WORDS NOT LINES on pages

I only see lines :(
You can turn off the period shortcut, so you can double space yourself easier. In settings, general, keyboard, "." Shortcut OFF. It's a work around.

How to get the no of pages in a report?

Hi All,
I have a requirement to get the number of pages in the crystal report.
I found that the following method of IReportSource gives the value.
public int getLastPageNumber(com.crystaldecisions.sdk.occa.report.application.IRequestContext requestContext)
throws java.lang.NullPointerException,
ReportSDKException
But the issue issue is with the paramter requestContext. How can I get this requestContext.
Appreciate your time.
Regards,
Anil Chowdary K

Because of the page on demand feature, by default there is no clean way to get the page number, because each page is generated as requested. To get the total page count, the viewer must render the entire report first. The easiest way to accomplish this is to use the CrystalReportViewer object and call the showLastPage() method, then using the CrystalReportViewer object generate a ViewInfo object, and call the getPageNumber() method.
For more information review the Viewer documentation in our [SDK Library|http://www.sdn.sap.com/irj/sdn/bi-sdklibrary].

How to retrieve total number of pages in a report of Instance - RAS SDK ?

Hello All,
Hope all is well. I am using BOXI R2 Enterprise and was wondering how to get total # of pages of an Crystal Report Instance using RAS SDK.
Thanks in advance,
Sam

How do i retrieve the total number of pages in a report-- via RAS SDK
Sincerely,
Ted Ueda

A group by field needs to appear on every page of the report.

Hi.
My rtf template has a word header which is the report descriptn that appears on evry page. The report is grouped by business unit and then grouped by job description. The problem is the business unit appears only first time when it gets changed and then it does not repeat its value until the next BU comes up. I want to display the BU on each page even though the value is same (just like as a heading of a section). I used the follwing tags. The one in bold is to solve the issue of puting the BU descr on each page. But does not work. Anybodys help is greatly appreciated.
*<?fld_BUSINESS_DESCR?>*
<?for-each-group:row_CU_DET_STG;./fld_BUSINESS_UNIT?><?sort
<?fld_BUSINESS_DESCR?>
<?for-each-group:current-group()/fld_JOB_FUNCTION?>
<?fld_JOB_DESCR?>
Sid

Thanks alot Tim for spreading your expertise. That worked !!. I added the start and end body tag along with your solution of using the section with the group and it worked. Thanks alot again. However there is one prob now the page numbers are being reset and i dont want to reset it because the page numbers should continue in sequence till the end of the report despite of Business Unit change. Please any suggestion to solve this problem.
Edited by: user12107527 on Oct 27, 2009 6:50 AM
Edited by: user12107527 on Oct 27, 2009 9:06 AM

How to acheive the purchase order items in Crystal report

Hi
In crystal Report am using purchase order layout ,how to remove the unwanted space(i'm using only one item like cement alone so lot of space in page 1 )below screen shot show the clear view how to remove this using formula.if suppose am using 5 items that space will cover ,but for 1 item lot of empty spaces.
Regards
Vinoth

Hi Vinoth,
Please follow below Steps.
In Crystal Report for Report Footer Section -- Report >>> Section Report >>> Print at Bottom of Page >>> Uncheck
Please check attachment also.
hope thid help
Regards::::
Atul Chakraborty

How to suppress "enter parameter values" screen in crystal reports for Visu

Hi,
    I am passing parameters to the report through program. But still the "Enter Parameter Values" Dialog is shown every time I run the application. Code used to pass parameters is given below:
                rptCBBookRpt objRptCBBook = new rptCBBookRpt();
                objRptCBBook.SetParameterValue("@Branch", strBranch);
                objRptCBBook.SetParameterValue("@CoName", mdlFinIF.objCommon.CoName);
                objRptCBBook.SetParameterValue("@Heading", strHeading);
                objRptCBBook.SetParameterValue("@UserInfo", mdlFinIF.objCommon.ReportInfo());
How can I suppress the "Enter Parameter Values" dialog. Please help.
Cris Evan

Well, no. But this being a community, not technical support, you may get a response, perhaps even an actual answer, or you may not...
If you are not getting a response or an answer, you may want to consider obtaining a dedicated support here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Check out the [Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] - it will apply to your version of CR...
And of course, developer help files.
- Ludek

How to leave space in every page in crystal report.

Similar Messages

Maybe you are looking for