HOW TO LENGTHEN THE SHORT TEST FIELD IN PR-urgent

dear friends,
my client is asking to lengthen the field size of SHORT TEXT in purchase requisition. if they enter the long text, the characters are getting tranucated.
can you please provide me good solution for this problem.
who is handling this issue either functional or technical consultant.
thanks in advance.
regards,
flemmings

Similar Messages

HOW TO LENGTHEN THE SHORT TEXT FIELD IN PR-urgent

dear friends,
my client is asking to lengthen the field size of SHORT TEXT in purchase requisition. if they enter the long text, the characters are getting tranucated.
can you please provide me good solution for this problem.
who is handling this issue either functional or technical consultant.
thanks in advance.
regards,
flemmings

I think there is no configuration to change the field length. It is technical job, but needs developer key to change the std SAP field length. I recomond that donot go for this, as short text itself is 40 charecter length, there are so may text fields in TEXT tabpage. You can get these texts in PO print also...
Juts think and proceed.

If we can increase the length of the Short Text field in a purchase order?

Hi Experts,
Please suggest if we can increase the length of the Short Text field in a purchase order?
If yes, How? and what will be the impact?
Thanks
Gavar

Dear Arpit,
You can use PO Text field for long description of the material.
Regards,
Manish Jain

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

How to get the object class field value in CDHDR table for vendor

hi
how to get the object class field value in CDHDR table for vendor

Try KRED/KRED_N as object class in CDHDR for Vendor.

How to get the short text in tcode "msc3n" -- Basic data 2 -- short text.

I have to display the short text in my report output.
How to get the short text in tcode "msc3n" ( msc3n --> Basic data 2 --> short text.)?
Is there any function module availble to get this short text or is this stored in any data base table ?
Please help me. Your help will be highly appreaciated.
THANKS.

Hi,
Use FM 'READ_TEXT' to get this values.
Say for exampele my material is 1900001 and batch is 0000000517.
Then my parameters to the FM will be as follows:-
Text Name       000000000001900001    0000000517
Language        EN
Text ID          VERM
Text Object     CHARGE
This information you can get as follows.
Open the short text window in the text editor.
Here you can enter the long text.
In the editor Go to Header and you will find the details.
Please note that the text name will comprise of
Material
Batch
Plant
Stor. Location
if all the details are given.
I hope this helps you.
Regards,
Ankur Parab

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to change the Short text of a GUI Status .

Hi Guys ,
   Can any one guide me on how to change the short text of an already existing GUI Status .
I have already tried doing these :Opened the GUI Status in change mode and changed the short texts of the Application tool bar ,
                           Menu Bar ,
                           Function Keys ,
thinking that this will update in the Short text .. but that didnt happen ...
Below is what I need ...
Requirement :
GUI Status : Status_001 .
Short Text : New GUI Status .
Change the Short Text to " Changed GUI Status ' .
Regards,
Ranjita

Hi Ranjita,
Do this...
go to SE80
Open the program.. open node GUI Status
Double click on the status you want to change
go to menu GOTO>ATTRIBUTES>STATUS
click on continue or simply enter
Here change the short text and continue or enter
activate it
Hope this helps..
Regards,
Kinshuk

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

How to see the Table Names & Field Names by other than F1 help

Hi Experts
   How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
Rgds

The only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB   - Index for Stock Transport Requisitions for Materi
EINA    - Purchasing Info Record: General Data
EINE     - Purchasing Info Record: Purchasing Organization D
EIPA     - Order Price History: Info Record
EKAB   - Release Documentation
EKAN   - Vendor Address: Purchasing Document
EKBE    - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ    - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH    - Scheduling Agreement Release Documentation
EKEK    - Header Data for Scheduling Agreement Releases
EKES     - Vendor Confirmations
EKET     - Scheduling Agreement Schedule Lines
EKETH   - Scheduling Agreement Schedules: History Tables
EKKI      - Purchasing Condition Index
EKKN    - Account Assignment in Purchasing Document
EKKO    - Purchasing Document Header
EKPA     - Partner Roles in Purchasing
EKPB     - "Material Provided" Item in Purchasing Document
EKPO    - Purchasing Document Item
EKPV    - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS    - ERS Procedure: Goods (Merchandise) Movements to b
EKUB    - Index for Stock Transport Orders for Material
EORD    - Purchasing Source List
EQUK    - Quota File: Header

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to fetch the Business area field value from MIRo into report

Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
Lakki

Dear,
For Bussiness area
RKPF-GSBER

How to set the short cut key for buttons

Hi
I dont know how to set the short cut keys for the button...can u pls help me out

Do you mean a short cut key for buttons at client side (web browser)? If yes, you could do it with JavaScript~~~ ^o^

How to run the Hardware test on a Mac mini 2015 ?

how to run the Hardware test on a Mac mini 2015 ?

Welcome to Apple Support Communities
New Macs come with Apple Diagnostics instead of Apple Hardware Test, but their purpose is the same: check that your Mac's hardware is working properly. See -> https://support.apple.com/kb/PH18765?locale=en_US
To run it, you only have to hold down the D key while your Mac is starting up, and follow the steps.

How to make the Profit Center Field Mandatory in Cost center Master Data

Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.

Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta

HOW TO LENGTHEN THE SHORT TEST FIELD IN PR-urgent

Similar Messages

Maybe you are looking for