How to Lift/Stamp specific adjustments

How do I pick for ex. only Saturation or contrast, with the lift/Stamp tool. Not all of the adjustments in Exposure.

Yes you could create a preset, but no way to batch apply to a selection of images. Lift/Stamp is the only way for that .... only the thick bordered image out of all selected images get processed by an adjustment.

Similar Messages

  • Lift and stamp image adjustments inconsistently working

    Just started playing with Aperture a few hours ago and seem to have intermittent problems lifting and stamping image adjustments. The manual has little info about lifting, beyond metadata, but sometimes I'm able to also lift image adjustments (color correction, crop, etc.). This was an advertised feature, so I assume the lack of info in the manual about lifting image adjustments is an oversight (or I am missing it). Unfortunately, I'm not usually able to lift image adjustments. They appear to be consistently availabel in the Lift HUD right after I make the adjustment to the image, but if I click away and then back, the adjustment is gone.
    I think it has something to do with the tiny icons on the lower-right part of some of my images. The one I usually see when I make some adjustments is a small white box with a left and right arrow on top of each other. This typically indicates that something isn't synched in other programs, but I don't know what needs to be synched in Aperture. The adjustments remain on the image when I click away and then back to it so they appear to be sticking.
    I've seen a couple of other icons show up in the lower right hand corner of images, but haven't been able to figure out what they mean. There doesn't seem to be mention of them anywhere in the Aperture documentation. Does anyone have a pointer or explanation of each of the icons' significance?

    OK, I got a bit of an answer from the instructional DVD. In the Image Adjusting section, they talk about lift and stamp. The problem is that you can't just select the image in the image browser, you have to click on the rendered image to lift the adjustments. It looks like you can also do this by option-clicking on the thumbnails.
    In the demo, though, they appear to lift and stamp a crop. I can't get anything other than color and luminance adjustments to show up in the list of possible adjustments to lift. Rotation, crop, etc. They're all ignored. Am I missing something?

  • Selective Lift & Stamp Operation

    Hey all - can anyone offer an approach to lift and stamp only 1 adjustment on a given image?
    I have a number of images that I've "developed", but and looking at the series as a whole, need to apply further changes to bring them in sync with each other. After getting my adjustments correct for my master, I am often overwriting ALL previous adjustments on the rest of the collection.
    Can anyone advise how to selectively choose which adjustment is applied? (ie only an exposure tweak, but NOT a crop, sharpen or etc?) This also seems to apply to specific keywords, IPTC data etc.
    Much appreciated,
    Ted

    Is this a common approach for mac applications? (it seems pretty non-intuitive from my pov)
    Well, I have found Mac apps to be intuitive, in general. I think in this case, it's not, and you must learn what the Add/Replace buttons mean, or that you must delete the unwanted settings. The Lift & Stamp Add/Replace buttons make logical sense to me once I realized that Add means to add the setting to the existing set, while Replace means to replace all the settings with only what is in the Lift & Stamp HUD. Deleting the unwanted settings is easy.
    There is a lot to Aperture that is not immediately apparent, which is why I learned so much going through the Luna/Long book. Like many applications I have tackled (Photoshop, Illustrator, InDesign) there is a learning curve.

  • Selective lift-stamp

    Okay, let's say I'm editing a batch of images, and the first thing I've done is level them all. (I'm shooting from a boat so almost every image needs some degree of leveling.) Then I notice my white balance isn't what I want it to be, and I'd like to batch correct all images to a new temp and tint. Is it possible to lift JUST the white balance from one frame, and stamp it on all the images, without overwriting the straighten adjustments I've already made?

    Yes. In the Lift+Stamp HUD, just highlight and then press delete for the adjustments you don't want to stamp.

  • How to monitor a specific transaction in Solution Manager ?

    Hi all,
    I have configured the Service Level Reporting and it works correctly.
    But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
    In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
    Have i to configure the Business Process Monitoring ?
    Thanks.

    Hello,
    it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
    In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
    Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
    Best Regards
    Volker

  • How to open a specific file in projector.

    Hi to all
    can any body tells me that how to open a specific file in
    projector with an application not in browser????
    and also want to add a button to mute the sound just like in
    intros with fade in and out effect.
    its urgent....
    Thanks in advance

    Hi,
    You can use FlashJester JStart
    http://jstart.flashjester.com
    that will open up any file the has been associated in Window
    Explorer.
    Download a FREE evaluation copy and try it for yourself.
    Please look at the example files given.
    Regards
    FlashJester Support Team
    e. - [email protected]
    w. -
    http://www.flashjester.com
    There is a very fine line between "hobby" and
    "mental illness."

  • How to find a specific word in sentence in each line?

    How to find a specific word in sentence in each line and output will show start from the beginning from specific word plus with small description from each sentence?
    For example: I need to find a "+Wednesday+" and "+Thursday+" word in each sentence by line by line from "myfile.txt".
    Go ballet class next Wednesday.
    On the Wednesday is going to swim class.
    We have a meeting on Thursday at Panda's.
    Then it will show the output:
    Wednesday : ballet class
    Wednesday : swim class
    Thursday: meeting at Panda's
    I am going to figure out in Java console to read from a file for specific word from each line and how to make it output in correct way. I know already to make input/file codes.

    I got it and understand much better. Thank you very much. There is a problem with it because I knew how to make
    a specific word in sentence but how I should make Output for specific word and some words from sentence.
    For example:
    Input:
    +"On Thursday go to ballet class"+
    +"Swim class on Friday one time a month at 2 p.m."+
    I used the codes for that:
    class FindSchedule{
         String firstline = "On Thursday go to ballet class ";
         String secondline = "Swim class on Friday one time a month ";
         FindSchedule(){
              System.out.println(firstline + findTheIndex("Thursday", firstline));
              System.out.println(secondline + findTheIndex("Friday", secondline));
         public int findTheIndex(String word, String sentence){
              int index;
              index = sentence.indexOf(word);
              return index;
         public static void main (String[] args){
              new FindSchedule();
    }The output will be:
    Thursday: ballet class
    Friday: 14:00 swim class one time a week
    Notice that time is changing in output complete different from input.
    I need to find out how to extract some words from each sentence for output. Do you know how to do it?

  • How to search a specific topic in a forum?

    How to search a specific topic in a forum? who can offer me a solution. I'm really appreciate it.

    Enter something in the box next to the words Advanced Search at the upper right and click on the button to display a list of search hits. Then, in the box to the right of the list, click on the word help to bring this Search Help and Tips page up:
    http://search.java.sun.com/search/java/help.jsp

  • How to print a specific cell in numbers

    how to print a specific cell in numbers?

    Copy the cell (contents), Paste onto a page of a separate document, or onto a separate sheet of your Numbers document, Print.
    Or insert a single cell table onto your Numbers document, type an = sign in the cell then click on the cell you want to print. Drag the new table to a second sheet, set up your page there, and print.
    See the Numbers '09 User Guide for other useful tools and techniques. Download the guide via the Help menu in Nuimbers.
    Regards,
    Barry

  • How can i print specific pages against searched word or name (in one print command) from 1000 pages

    how can i print specific pages against searched word or name (in one print command) from 1000 pages

    Thanks, Alex!
    ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
    I don't try second approach, because at this time I have only one report
    I try also with VB macro: this is better (print3.vi) but.....if I use:
    Sub Print_Pages_From_To()
    ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
    End Sub
    is ok; print the pages selected; if I use:
    Sub PrintPages()
    ActiveDocument.ActiveWindow.PrintOut  Pages:="2-3"  
    End Sub
    printer print all pages.
    what do you think?
    regards,
    Italo
    Attachments:
    print Problem.jpg ‏39 KB
    print4.vi ‏19 KB
    print3.vi ‏19 KB

  • How do I apply same adjustments to multiple photos at the same time?

    How do I apply same adjustments to multiple photos at the same time?

    You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
    1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
    2 - Control-clicking on the next photo and selecting Paste Adjustments.
    OT

  • HT2513 how do I share specific events on my calendar with others?

    How do I share specific events on my calendar with others?

    To share an entire calendar via mac and icloud you will either need a iCal server or to login with your icloud account with the computer you want the calendar on. I find the easiest way to share calendars is to sync your calendar with Google Calendar. Login to Google Calendar, under the "My Calendars" Tab on the left side, find the calendar you would like to share. Hover over it with the mouse and an upside down triangle will appear a little to the right of the calendar name. Click on the triangle and click share this calendar.

  • How to add a specific order type into any particular report

    Hi All,
    How to add a specific document type(order type) into any particular report in order to review OTD performance.
    I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
    Thanks,
    Raj

    Hi Rajesh,
    thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
    Thanks
    Raj

  • How to enter a specific vendor for  the delivery costs in purchasing order?

    Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for  the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
    <i>
    <b>No one would like to answer this question?</b></i>
    Message was edited by:
            King Qi

    hi, 
    You can have vendor at each condition record level.
    try it out.
    cheers
    Rav

  • [solved] How to source a specific commit in a Git package?

    Hi there,
    I wonder whether it is possible to use a certain Git commit in the source array of a package.
    Example:
    freshplayerplugin-git
    For debugging purposes I would like to use the commit
    8ff0bd0282205802c482c7d47f216feb0d3394a9
    I tried the following in the source array and it successfully built the package:
    source=('git://github.com/i-rinat/freshplayerplugin.git#commit=8ff0bd0282205802c482c7d47f216feb0d3394a9')
    However, I have no idea how to detect whether it actually built from the specific commit or just skipped the #commit appending.
    Does anyone know how to source a specific commit?
    Thanks ahead!
    Last edited by orschiro (2014-07-17 11:21:17)

    Correct syntax for Git repository as a source would be:
    source=('git+https://<repo-url>#[commit|tag|branch]=<ref>')
    To verify it's building correct tree, and moreover to keep sane when dealing with multiple trees I like following pkgver (check https://wiki.archlinux.org/index.php/VC … Guidelines):
    pkgver() {
    cd "$srcdir/<repo-name>"
    printf 'r%s.%s' "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
    producing something like:
    <package-name-git>-r4.34e558d-1-any.pkg.tar.xz
    Also just going to fetched Git tree and checking out what's there is an option (look for makepkg branch), for example:
    $ git show-ref
    34e558d2ef8b2cae212da3ab3f74513a99f9ee1b refs/heads/makepkg
    86350ab5a3a209de4339ef04d75d27c7bd399746 refs/heads/master
    86350ab5a3a209de4339ef04d75d27c7bd399746 refs/remotes/origin/HEAD
    86350ab5a3a209de4339ef04d75d27c7bd399746 refs/remotes/origin/master
    Last edited by mkoskar (2014-07-17 09:13:11)

Maybe you are looking for