How to limit bandwidth for guest per connection/user on 2504 WLC?

We have 2504 Controller with 24 AP's registered in a hotel and we would like to limit bandwidth per connection or per user.
I went to QOS Profiles > Bronze >
I do not see Per user Bandwidth Contracts(K)* instead I see WLAN QOS Parameters with below options.

Hello
Our WLC model 5508, but there is confusion on difference between Override Per-User Bandwidth Contracts (kbps) vs Override Per-SSID Bandwidth Contracts (kbps)
Our requirement-
On Guest SSID - Each user / session should not exceed bandwidth more than 758kbps upstream/downstream
Only Guest users cannot login to multiple device with single userID - applicable only to Guest SSID other SSID should not get impacted.
hope to get some response
cheers
ST

Similar Messages

Limiting bandwidth for Guest WLAN in AP1300

Hi All,
Can I limit bandwith for guest in a wlan network with out Wlan controller? and of course, how can I do it?
thanks in advance
P.S.: I heard something about bronze profile in a wlan controller envoiroment, I need something like that but in an independent AP.

Sorry for my delay but I was outt of the office.
Could you show me how to do that?
thanks in advance

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

How much cellular bandwidth for garageband

how much cellular bandwidth for garageband on an iphone 5

I don't understand what you are asking. GB doesn't use the phone part of the iPhone.

Does *new* Time Capsule let you limit bandwidth on guest connection?

I'm curious to know if the new dual-band Time Capsule/AEBS will let you limit bandwidth on the guest connection, or if it will suck up all the available bandwidth without restrictions?

I would say No to this. Apple wouldn't care much about bandwidth issue but I must admit that could be nice option to play with. But you never know.

How to limit the number of TCP connections beeing used concurrently while a page is beeing loaded?

We manufacture industrial small-footprint control modules with embedded web server. The resources of these modules are very limited, especially in RAM. We have problem, that FF opens 15 parallel TCP connections while loading a web page (main html page first, then all icons simultaneously). We can not handle such behavior because of lack of RAM memory needed for TCP buffers.
Question is how to limit the number of concurrent TCP connections the browser will use? We need to do it somehow directly from the page, we can not push our customers to change the general settings of their browsers (they would not understand such things anyway).
Do anyone have any suggestion?

Sorry, one other thought. Many web designers now combine all icons into a single image and use CSS to clip the image so that only the desired portion is displayed. This minimizes the number of required connections and increases the probability that the image can be retrieved from cache.
More info:
* [http://www.w3schools.com/css/css_image_sprites.asp CSS Image Sprites - W3Schools]
* [http://www.alistapart.com/articles/sprites/ A List Apart: Articles: CSS Sprites: Image Slicing’s Kiss of Death]
* [http://coding.smashingmagazine.com/2009/04/27/the-mystery-of-css-sprites-techniques-tools-and-tutorials/ The Mystery Of CSS Sprites: Techniques, Tools And Tutorials | Smashing Coding]
No idea whether this is practical for your application.

How to limit values for InfoObject 0FISCPER

Hello experts
we work with BI 7.0
we use a manual input variable on InfoObject 0FISCPER in the filter of our queries.
As input help for the variable, the user gets a huge list of values. This list begins with year 2002. How can we limit the values of this list, for example the list should begin with year 2007.
InfoObject Settings for Master Data Access is "Own Implementation" Name of Master Data Read Class is "CL_RSMD_RS_0FISCVARNT". I think these settings are SAP standard for this InfoObject.
Thanks for your help
Johannes

You can also create a customer exit variable for fiscper.
And in the code, you can add the fiscal period values as per requirments,
That you want to default in the selection screen.
You can do a SELECT from the DSO(I assume there should be one that loads the cube) and select the available fiscal periods.
Thanks.

Limit bandwidth for users or S650

Is there a way to limit the bandwidth for all the users or the entire appliance.For example lets say you have a 9mb pipe however you dont want the appliance or all of the users combined to use say more than 6mb.Is this something that can be done now?If not is it a planned feature upgrade.
thanks

Charles,
Currently, there is no way to do access based bandwidth throttling or system wide bandwidth throttling.
Both of these features are filed under theses enhancement requests:
35364: Bandwidth limit for authentication group or ip range
39720: Bandwidth throttling (QoS) to maintain a solid client experience
Please contact your sales representative and inform them of the importance and priority of these features to you.

Using ISE for guest access together with anchor controller WLC in DMZ

Hi there,
I setup a guest WLAN in our LAB environment. I have one internal WLC connection to an anchor controller in our DMZ. I'm using the WLC integrated web-auth portal which works fine.
To gain more flexibility regarding guest account provisioning and reporting my idea is to use Cisco Identity Services Engine (ISE) for web-authentication. So the anchor controller in the DMZ would redirect the guest clients to the ISE portal.
As the ISE is located on the internal network while the guest clients end up in the DMZ network this would mean that I have to open the web-auth portal port of ISE for all guest client IPs in order to be able to authenticate.
Does anyone know of a better solution for this ? Where to place the ISE for this scenario, etc ?
Thx
Frank

So i ran into a similar scenario on a recent deployment:
We had the following:
WLC-A on private network (Inside)
ISE Servers ISE01 and ISE02 (Inside)
WLC-B Anchor in DMZ for Guest traffic (DMZ)
ISE Server 3 (DMZ)
ISE01 and ISE02 are used for 802.1X for the private network WLAN.
Customer does not allow guest traffic to move from a less secure network to a more secure network (Compliance reasons).
The foreign controller (WLC-A) must handle all L2 authentication and it must use the same policy node that the clients will hit for web auth. Since we want to do CWA, we use Mac Filtering with ISE as the radius server. If you send this traffic RADIUS authentication for Mac Filtering to ISE01/ISE02, it will use https://ise01.mydomain.com/... to redirect the client to. Since we don't allow traffic to traverse from the DMZ with the anchor in it back inside to the network where ISE01 and ISE02 are, client redirection fails. (This was a limitation of ISE 1.1. Not sure if this persists in 1.2 or not.
So what now? In our deployment we decided to use a 3rd ISE policy node (ISE03 in the DMZ) for guest authentiction from the Foreign controller so that the client will use a DNS of https://ise03.mydomain.com/... to redirect the client to. Once the session is authenticated, ISE03 will send a CoA back to the foreign which will remove the redirect for the session. Note, you do have to allow ISE03 to send a CoA.
In summary, if you can't allow guest traffic to head back inside the network to hit the CWA portal, you must add a policy node in a DMZ to use for the CWA portal so they have a resolvable and reachable policy node.

Server specifications for 1000 concurently connected users.

Dear all,
we want to prepare a server having windows server 2003 to install oracle database 10g. the same server will act as an application server as well.
we want to know how much size of the following we need if we have 1000 concurrently connected users;
1.RAM
2.Processor
Thank you.

the same server will act as an application server as well.
BAD Idea. Really very bad. IO patterns on an application server are completely different from a database server.
Disk will be a bottleneck.
And server will be Single Point of Failure,
And why Win2003 and not Win2008?
Sybrand Bakker
Senior Oracle DBA

How to export song for a pro tools user

how do i export an audio instrument track for a pro tools user? i have a song with audio track and audio instruments and i was wondering if there was a way i could export the audio instruments seperately
iMAC G5 isight Mac OS X (10.4.6) M-audio keystation 49, m-audio firewire 4-10, logic pro 7, yamaha monitors

this is very easy now in logic. look in file -> export and there are a range of options.
export region as audio file, and export tracks as audio files. if you do this (as opposed to OMF which is really only best for audio) then it is worth making sure that the regions start at the same point. it might be worth checking to see if exporting tracks as audio files will do this automatically for you - i have not used the feature.
once the tracks have been exported (and incidentally they will print all the plug-in processing you have applied to them in the channel-strips) then simply import them into PT and start working. obviously they should all start at the same position.

How to assign roles for each kind of users

Hello,
i am creating users for each kind of users, say abap developer or FI/MM/SD function users, in IDES ECC 6. it doesnt make me any sense how to assign which roles to which user( there are more than 2000 sap standard roles). can anyone give me some guideline how to create each kind of users.
any response will be awarded!
Thanks a lot!
Samson

I don't understand your question....
When sap is implemented usually part of the project is creating roles based on a blueprint designed to adjust to your company needs...
Basically Standard roles are there to be used as templates for your own roles.
Users as "dialog users" do not have classification... the special access attributes are given by the roles assigned to it based on the project plan desing pre-installation.
Hope that help
Juan

How to limit the size of the connection method parameter

I connected an FMS server like var nc = new NetConnection ();
nc.connect ("rtmfp :/ / localhost: 61018/zy/1", a);
But how to restrict the size of the parameter a, assuming that this a set to a 10GB object, or a very large byte, I found that the server received. This allows the hacker attacks, Is there any way to limit the size of this a, I hope that does not exceed 100KB.

RTMFP encodes low-level messages in a manner compatible with RTMP messages. RTMP messages are length-field limited to 16MB (24 bits), and there is an artificial software limit somewhat less than that (approximately 10MB if i recall correctly).
it should not be possible to send a connect message to an RTMFP or RTMP server exceeding about 10MB.
ByteArray is limited to 4GB, and can't be serialized to AMF beyond 512MB (29 bits).
also keep in mind that for an RTMFP or RTMP server to receive such a large message, that many bytes must be sent to it from somewhere (you).

How to limit data for a dimension in any subject area?

Hi folks,
I do have a little problem, maybe you can help me:
I have a large subject area for all my countries and product i sell there.
now i want to have special subject areas for certain countries.
that for i ducplucated my large subject area, went to the identity manager and there I set special Rights für the users: I chose my fact measure and put a data filter for it on the dimension country.countryname = Germany.
I hope you can fallow me until here. ;-)
Now I can build a query in answers and it works, within this subject area I only get data for Germany.
BUT: when I'm on the criteria tab and try to create a filter on my countryname (from the dimension) it shows me all the countries I have.
I think for the end users this is a litte bit confusing.
So how do I limit the dimension in this subject area to a particular value?
I would be very happy for help, cause then I could finish my development for today ;-)
Kind regards,
Sven

Try this; @BMM Fact source properties->Content tab->WHERE clause section add the dimension country.countryname = 'Germany'.
Also set the implicit fact on the subject area.
Let us know how it works
Edited by: Srini VEERAVALLI on Apr 8, 2013 7:12 AM

F110 - How to limit number of payments per document

Dear All,
Our client wants to limit the number of payments per account document for Russia.
Does somebody knows a method to limit to "3" this number for each payment document when execution of transaction F110 ?
So if a supplier has 10 invoices payable, this creates 4 payments (3 + 3 + 3 + 1)
Thanks in advance
Regards
Daniel.

Hello,
I do not think this requirement is possible in standard SAP.
You have to decide whether you want to group payment document for single invoice or all invoices.
There is no configuration to divide payment documents for 3 invoices.
Regards,
Ravi

How to limit bandwidth for guest per connection/user on 2504 WLC?

Similar Messages

Maybe you are looking for