How to limit choices among a group of responders?

I am setting up a sign up form for a variety of choices. There are only a certain number of each choice needed. How can I make a form either hide or limit a choice once the necessary qty has been reached by other responders?
Thanks

Hi;
This isn't something that FormsCentral supports, you'd have to manually analyze the responses and once the max has been reached edit the form to remove that choice - you'd want to take care not to simply delete it since the corresponding column in the Response table would also be deleted.
In this type of case, if the item to be removed is an entire field as opposed to a choice in a single/multiple/drop-down choice field I'd recommend inserting an adjacent column in the response table and copying that columns data into the new row before deleting the question. If the option was simply a choice in a single/multiple choice or drow down field it can be deleted or updated and new responses will simply reflect the new choices, no need to duplicate a column to modify a choice field.
Thanks,
Josh

Similar Messages

How to limit row number per group without change new page in crystal report

Hi All Expert,
Is there any way to limit row number per group without change new page in crystal report 2008. The reason i do that is due to customer using printer EPSON LQ 300 (dot matrix) always will print in landscape if detech my layout in landscape. Because they need the record always print in 1 page (Letter size) for 2 groups and each group must show 5 records. Example:
But, in CR2008, if you set the row per group from group section expert, definitely it will change to new page, but I do not want it change to new page. Any Idea?
In one page (Letter size):
Group Name: Customer-ABC
NO INVOICE AMOUNT
1)   INV001     USD100
2)   INV002     USD100
3)   INV003     USD100
4)   INV004     USD100
5)   INV005     USD100
Group Name: Customer-ABC
NO INVOICE AMOUNT
6)   INV006     USD100
7)   INV007     USD100
8)   INV008     USD100
9)   INV009     USD100
10) INV010     USD100

Hi Angie.....
I guess it is not possible.
Because if you have one common group for all the 10 records then in one page it will show 10 records under one group.
I mean i think it is not possible but m not completely sure......
Lets wait for expert advise....
Regards,
Rahul

ICloud alias pop-up menu in Apple Mail – how to limit choices?

Now that Apple has added @icloud to the options for .mac/.me e-mail addresses, my menu of aliases has become too cluttered. See pic below for what I have to scroll through to pick everytime I create a new message.
There's got to be some way to remove all the @icloud aliases from the menu, isn't there?
Help?

U-verse may use Yahoo servers -- meaning that Yahoo owns and manages them for AT&T, or vice versa -- but at least in my case, not the same physical servers. My U-verse servers are inbound.att.net and outbound.att.net.
I've had my bellsouth.net account for years and it did use a something.yahoo.something, and I accessed it via my Charter Cable provider. But when I swiched to U-verse last month, it didn't work and I had to change my server settings to att.net using POP3.
My specific Yahoo account was one I accessed only rarely, and I used the web; I never bothered to set it up in Apple Mail. Indications at Yahoo.com mail help pages are that you do indeed need the paid-for POP access. They refer to it as POP forwarding, but there seems to be no way to get past it and tell them that I don't want to "forward" -- I just want to access.

HT201320 How do I set up a group of emails? Is there a limit?

How do I set up a group of emails? Is there a limit?

Hi,
You can indeed create groups (family, friends, ...) on your computer, and then sync with iTunes on your iPhone. I find it is quite complex. When you will need to modify a group (add or remove a member for example), you will need to do it on computer, and sync again.
I am proposing you an alternative : I have developed a free application to manage contacts groups, to populate these groups, and then to send emails or texts to all group members in one tap.
I tried to respect as much as possible iPhone design (simple, intuitive,...).
You can download it for free on App Store here:
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
I would be pleased it could help you.
Regards,
Rémi
I may receive some form of compensation, financial or otherwise, from my recommendation or link. <Edited by Host>

How to Limit Group to Reach Host at Specified Port

Is it possible on the CVPN30XX platform to limit users in a group to reaching only a certain host at a particular port number? I know I can create a network list that limits traffic to a particular destination. But then I want to further limit the traffic to just one specific port - e.g. users would be allowed ssh to a bastion host if they passed authentication. Thanks much.

I found the filters and rules needed to do this. Never mind. It's just been a while since I needed to do this.

How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?

Hello All,
I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library.
To be specific.
I have Created a Project Document Set, Which has a Column called "Project Members" where all the members will be listed. This will be inherited to all the documents in that Project Document Set. This is used to grant Permission using Workflow.
I also have "Document Members" Column(This is only for Documents) who will be given Edit permissions to that Document using a Workflow. This can be any type of column(choice, People or Group etc) As long as I can select multiple values.
I am looking for a way to get the "Project Members"(Values or Users) as choices for "Document Members". I know this is possible in the List as you can customize in the InfoPath Form. But not sure in the Document Library.
Document Members can only be the members from the Project Members, In order to grant granular Permissions for the project And Documents using a Workflow
Document Library
Project Document Set Name
File Name
Project Members
Document Members
Project A
User1;User2;User3
Doc1
User1;User2;User4
User1;
Doc2
User1;User2;User5
User1;User2;
Doc3
User1;User2;User6
User1;User2;User3;
Project B
User5;User6;User7;
Doc1
User5;User6;User7;
User7;User5
Doc2
User5;User6;User7;
User7;User5
Doc3
User5;User6;User7;
User5;User6;User7;
Thanks for your time.

>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm

CISCO ACS, How to Limit User Session ?

Hi Guys,
hope you would help me,
how to limit the user session in ACS 5.x ?
i'm aware the menu on
Access Policies >Max User Session Policy > Max Session Group Settings
i already set the global value to 1, Max Session for User in Group to 1, and Max Session for Group to 1.
so it means the user only could open 1 connect at the same time right?
the problem, it didn't works.
i had 1 ACS 5.5
2 CISCO Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (fc3)
(let's call it R1 and R2 )
i'm trying to telnet both of them at the same time, and it works ( it means the session limit didn't works, cmiiw )
i already include :
radius-server attribute 44 include-in-access-req
radius-server host 192.168.217.98 auth-port 1645 acct-port 1646 key somekey
on the line vty :
accounting connection acs
login authentication acs
am i missing something?
also, is this feature works on tacacs+ too?
Thanks,

Dash,
You can leverage the group mapping feature where members of a certain AD group are mapped to a local group in ACS with the max sessions defined.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-3/user/guide/acsuserguide/access_policies.html#pgfId-1162308
Thanks,
Tarik Admani

CC01 how can i choice a specific number range ?

Dear
In trx. OS53 i have defined two different internal number range object for change master record.
When I create a new change master how can I choice a specific number range ?
Thanks.

Hello,
If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
In the standard SAP to set of number range (one internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal number range,where during CC01 without any value for the field change number you can proceed.When creating through CC31 you can make use of external number range by giving the change number as the input and you save the data.
Hope the information is useful
Regards

How to limit incoming call on B-ACD CME?

I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
Iwan

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

SSHR limit searches by business group

Hello, I was wondering how to limit all searches in SSHR to my business group.
I've set the profile option HR:Business Group but this doesn't seem to be having any effect and returns basically every individual , every job (when applying for job for example).
How do I limit this?
Thanks

Well Declan..you have to note this thing before going for this solution.
The field you want to add as a hidden search parameter , should not be available on UI.
Otherwise controlling the user will be very difficult.(Nevertheless, you can achieve it, but have to take lot of pains.)
For example if you want to display partners belonging to a particular country say 'US',then add a record to GT_HIDDEN_PARAMETERS.
DATA: ls_params   TYPE genilt_selection_parameter.
    ls_params-attr_name = 'COUNTRY'.
    ls_params-sign      = 'I'.
    ls_params-option    = 'EQ'.
    ls_params-low      = 'US'.
    APPEND ls_params TO gt_hidden_parameters.
Implement this code in EH_ONSEARCH and then call super class. Standard code by default reads this gt_hidden_parameters.
This is proprietary to BP_HEAD_SEARCH Component. If you have to implement this for some other componet then you should create an attribute gt_hidden_parameters and then read this internal table manually and manipulate the search criteria as is being done in standard code of method EH_ONSEARCH of BP_HEAD_SEARCH/SearchHelp.
As I mentioned earlier COUNTRY attribute should not be available on UI.
If Country was available on UI, then imagine a case if user enters 'UK' as country and you have hard-coded inside to get only 'US'
Then the result list have partners of 'US' despite user entering 'UK'. I mean to say the hidden parameters should not be available on UI.
This way you can any valid hidden attributes by looking at the search object of the serach page in Model Browser.
Cheers,
Masood Imrani S.

How do I use Panorama / Tab Groups with the keyboard?

Yes I know that CTRL-SHIFT-E opens the panorama window, and then I can use the mouse to organize my tabs into groups.
But how do I do this with the keyboard?
I've [http://lifehacker.com/#!5719596/switch-between-tab-groups-in-firefox-with-a-keyboard-shortcut read] [http://ubuntuforums.org/showthread.php?t=1705714 that] Ctrl-`should move me through tab groups. That doesn't work for me on my Danish keyboard. (Where the ' and ` chars are weird. But is how they are on a valid standard Danish keyboard) I've tried changing the keyboard to USA and then moving through tab groups works fine.
In short: Pretend I don't have a mouse. How do I use Panorama / Tab Groups?

Sorry. These are both known bugs:
[https://bugzilla.mozilla.org/show_bug.cgi?id=587010 Bug 587010] - Add keyboard UI for manipulated groups and tabs in Tab Candy
and
[https://bugzilla.mozilla.org/show_bug.cgi?id=626594 Bug 626594] - shortcut for switching tab groups is badly accessible on many non-US keyboard layouts

When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move them in groups to a folder?

When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move these in groups to a folder or folders?

The easiest way to move bookmarks around is in the Bookmarks Organizer, which at some point was renamed the Library. To open it, you can choose Bookmarks > Show All Bookmarks or press Ctrl+Shift+b.
(Please note that the sort order of the Library dialog doesn't actually carry over to the menu. To sort the menu alphabetically, it's easiest to open the Bookmarks Sidebar, right-click the words Bookmarks Menu and choose Sort by Name.)

How do I delete a contact group from my iphone

How do I delete a contact group from my iphone?

Download Easy Group. It is totally free. Lauch it. Click on Edit. Click on red-cross next to your unwanted group. That's all. http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: As I am Easy Group developper, I may receive some form of compensation, financial or otherwise,from my recommendation or link.

How do I view contacts by group in E63?

How do I view contacts by group in E63? I tried scrolling right in the contacts list and all that came up were the connection options (voice call, send text message, etc.)? I really need this function as I need to group contacts by country for ease of search. Thank you.

Contact groups
Select each contact you want to add to the contact
group, select Options > Mark/Unmark > Mark to
mark it, select Options > Group > Add to group>
Create new group > Group name, and enter a name
for the group.
If you want to make conference calls to the group,
define also the following:
• Conf. service number — Enter the conference call
service number.
• Conf. service ID — Enter the conference call ID
number.
• Conf. service PIN — Enter the conference call PIN
code number.
To make a conference call to the group, select the
group, scroll right, and select Call conf. service from
*** source E63 user guide
now did you try this approach that is listed in your user guide?
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

How do I create an email group on iPad 2?

How do I create an email group from email or contacts to send emails to groups of like contacts

It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
If your groups are small you can try our free version on
http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
Any problems, get in touch on our support email.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales.

How to limit choices among a group of responders?

Similar Messages

Maybe you are looking for