How to limit incoming email to only come from a cloud spam provider

I run a mac mini server for email 10.8
I am getting a lot of junk email that is bypassing spam blocking provider. I want to setup up on server, a rule to only receive mail on port 25 to come from a specific ip address. Older OS would let you set up easily.

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

Similar Messages

  • How to limit incoming call on B-ACD CME?

    I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
    How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
    Here are my config:
    application
    service queue flash:app-b-acd-2.1.2.2.tcl
    param queue-len 30
    param queue-manager-debugs 1
    param number-of-hunt-grps 1
    param aa-hunt2 0
    service aa flash:app-b-acd-aa-2.1.2.2.tcl
    paramspace english index 1
    param number-of-hunt-grps 1
    param handoff-string aa
    param dial-by-extension-option 1
    paramspace english language en
    param max-time-vm-retry 1
    param max-extension-length 7
    param aa-pilot 2999
    paramspace english location flash:
    param second-greeting-time 30
    param welcome-prompt _bacd_welcome.au
    param call-retry-timer 15
    param max-time-call-retry 60
    param voice-mail 0
    param service-name queue
    FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
    Regards,
    Iwan

    Hi Iwan,
    To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
    Set Up Incoming Dial Peers for AA Pilot Numbers
    In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
    Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
    Note You must configure a dial peer for each incoming DID voice port.
    To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
    Total number of phones across all ephone hunt groups
    Total number of slots in the queues across all queues
    Total number of PSTN ports feeding into the queues
    The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
    Hope this helps!
    Rob

  • SCCM 2012- How to limit a collection membership only for specific count of machines

    How to limit a collection membership only for specific count of machines

    As I said you can use where SMS ID like %1 and see how many machines that gets you. If it's not enough do where SMS ID like %1 or SMS ID like %2. Keep adding a digit until you get ~5000. It won't be perfect though.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • How to limit sharing apps to only two devices? because i have an iPod touch and an iPad. i just want to limit the sharing of apps to those two.

    how to limit sharing apps to only two devices? because i have an iPod touch and an iPad. i just want to limit the sharing of apps to those two. because my brother is using my apple id too on his ipod. i want to limit it to mine only. tnx!

    You can go into settings and turn sharing off in the programs on the device you don't want to share too.

  • Hi Guys, i mistakenly synced my iphone and all my email contacts appears in my contacts list. its mixed up. can someone please assist me on how to delete the email address ONLY?

    hi Guys, i mistakenly synced my iphone and all my email contacts appears in my contacts list. its mixed up. can someone please assist me on how to delete the email address ONLY?

    Don't understand your problem... Contacts sync with a compatible address book or cloud service. Contact records can contain names, addresses, phone numbers, e-mail addresses, notes, or any combination of these. If you have records you don't want in your address book that you don't want in your contacts, then segregate them into groups in your address book and only sync the group(s) you want. If you don't want them there at all, then delete them.

  • How can I change email received by others from me via my IMac and MacBookPro being received as APPLE?ring as just Apple

    How can I change emails received by others from me on my IMac and MacBookPro appearing on their computers as 'APPLE' and not my name?

    Thanks - I did not realize that Homesharing can be specifically set to a photo destination like that!
    So, it would appear that I can either point it to iPhoto (and folders/ events within that) OR the default Pictures folder and subfolders of that OR any other specific folder (and subfolders of that) of my choice.  However, I cannot select BOTH the default Pictures folder (and some subfolder of that) AND a folder in iPhoto AND/ OR an event/ folder in iPhoto.  Is that a correct assumption?
    If so, the only way I see getting homesharing to get both set of pictures is to get all my picture folders (internal and external drive based) into iPhoto (without physically duplicating them) - and then pointing Homesharing to iPhoto, right?
    I think you have solved my issue - but I just want to be sure of that.
    Thanks a ton!

  • How to save my emails and adressbook files from an old ibook?

    How to save my emails and adressbook files from an old ibook (bought around 2002) ?
    The screen from the old ibook doesn´t work anymore (logicboard problem I guess).
    I saved everything else with starting it in target modus. That worked fine.
    I want to delete the files after that as well, because I wanna give away the old ibook and don´t want anyone to read my emails!
    Little helpers I have:
    A running MacBook
    External Screen (and cables to connect)
    Fire Wire Cable

    Don't know how helpful this will be but I often copy mail from one computer to another, I drag the mail from the mail window to the other computers drop box, then from the other computer double click it and mail asks me what I want to do with it, of course without a screen you'd need to use back to my mac.
    If you don't have back to my mac running, you could set up a second user account on the newer mac, import everything via target mode as suggested by c above, and then drag the mail to the first user account drop box.

  • Has anyone received an email purporting to come from Apple Worldwide support requesting an update to apple profile details under the "know your customer" legislation? Or is this a scam?

    has anyone received an email purporting to come from Apple Worldwide support requesting an update to apple profile details under the "know your customer" legislation? Or is this a scam?

    Smells rather "phishy" to me.

  • How can I know the request is come from the link in header in the filter?

    I am using the tile for layout management and each page has a header, menu, and content body. I want to do something at the filter If the request is come from the commandlinks in the header and menu.
    How can I know the request is come from the link in header in the filter?

    Basically all you have to go on is the request data. Examine the encode/decode requirements for commandLink; you may be able to determine from the request attributes which commandLink has been invoked.

  • How do i send emails with outlook express from firefox

    how do i send emails with outlook express from firefox

    You can add a button by using the [http://webdesigns.ms11.net/getmail.html Get Mail] add-on.

  • Sound only comming from subwoofer

    the sound on my dv7 is only comming from the subwoofer and the mute button by the volume control is stuck on red but the volume its self is not muted

    Try Uninstalling/Reinstalling the Driver for the Audio in the device manager.
    Click Start - Right Click Computer, Click Properties.
    Click Device Manager on the left.
    Scroll Down to Sound, Video and Game Controlers. Click the plus-sign beside that.
    Right click on the two drivers you should see there, then click uninstall. (You'll have to do each of them individually.)
    Click "OK". (Do not check the check box.)
    When they're both gone, restart the NB.
    They should automatically re-install on re-start.
    Re-start the machine a second time, try the sound again.

  • Sound from Apple Earpods only comes from the side speakers?

    **** i normally sometimes use my Apple Earpods but today i have realised that the sound only comes from the side speakers, i've cleaned the other speakers however that doesn't help

    There is only one speaker for each ear. See here.

  • I have an app on my phone that has a glitch.i want to get rid of the app so that i can re install it,but when i re istall,it comes from the cloud and still has the glitch. how do i remove an app from my cloud

    I have an app that i want to get out of my cloud,can i do this ????? It has a glitch and wont work and when i come to re install, it comes from my cloud along with the glitch. Can anyone help ?

    When you tap the iCloud download symbol it's downloading a fresh copy of the app from the App Store, not from your iCloud account.  (Your previous purchases aren't stored in your iCloud account, they are stored in the App store and can be redownloaded from there.)
    If the app still has a glitch, try contacting the app developer.  Perhaps there's a problem with the app running with iOS 7.1.

  • How do i get my pics to download from the cloud after resetting my phone?

    How do i get my pics to download from the cloud after having to reset the phone?  I have 1000 pics and only 90 of them came back.

    If these are photo stream photos, what you may not know is that photo stream only keeps photos in photo stream for 30 days, even though they will remain on your devices (up to 1000) photos until your delete them.  The 90 photos that were still there are probably the ones added in the last 30 days.
    Camera roll photos are included in your iCloud backup.  If the missing photos were in your camera roll when you last backed up, restoring the backup to your phone should recover them.  If they weren't in your camera roll there is no way to recover them.

  • How can I remove apps no longer wanted from the cloud

    How can I remove apps no longer wanted from the cloud? they are not used any more and taking up space.

    Welcome to the Apple community Mickeymom.
    The apps are not actually in your iCloud storage, they are links to the apps in the App Store. What you are seeing is your purchase history and as such cannot be deleted.
    You can however hide your purchases, which you can do from the QuickLinks > Purchased option from the main page in the iTunes Store on your computer.

Maybe you are looking for

  • Changed to Uverse from DSL, TC won't work

    We recently switched our home business network from AT&T DSL service to Uverse. I can't get the Time Capsule to stop flashing amber. I have tried to configure it through our computers (including while directly wired from the Uverse router) and they s

  • All FRM messages are suppressed after buissness rules validation

    hello, i've just discovered this really odd and annoying problem and I need some help. After validating business rules all forms messages are suppressed. If I re-enter the form, messages appear again, but are "visible" only till next business rules v

  • Play Video then load SWF?

    Hello all. I'd like to have a flash page play a video and, at its completion, load a new swf file. I have the code working fine for getting an html page (below), but would like to substitute it for loading the swf file aforementioned. I assume it's a

  • TV out doesn't work for some videofiles

    I am using the GEforce 2 mx 400 64 mb I have configured the driver as 'klone' . Now i've got two outputs of the card at the same time; one to monitor, one to tv (with s-vhs cable) It works fine, except for  playing videofiles (Mpeg, WMV etc, In media

  • SNMP subagent with SMUX SNMP master agent

    I'm looking for the smux agent configuration for ucp-snmp to be able to use it as the master agent on a Linux/Solaris server. The subagent would be the LDAP instance snmp sub-agent. According to the documentation, if I have a master agent that I can'