How to limit internet access in dpc3925

Hi all,
I have dpc3925 router and I want to restrict the time of internet access to a certain laptop.. I know it can be done... Plese help me how to do it... Appriciate thevhelp in advance....

That is how the gateway is designed. As for the other software that you can use for restricting the laptop, you can try searching the net but I doubt it will work since the laptop is connected to the gateway’s network and it’s only thru the gateway that you can restrict that laptop at certain times to connect to the internet.

Similar Messages

Parental control - how to limit internet time

Anyone got any advice on how to limit internet access time to a shorter time than the full amount of computer time set in Parental Controls. My 14 year old wastes most of her computer time surfing stuff of little value. I am happy for her to still have daily computer time but don't want it all used up on the net. I want to encourage her to use some of the more creative potential of the Mac i.e Garageband, iMovie - she used to - she is very creative but gets sucked into other stuff very easily.
Are there any add-ons that I should consider?
Any advice gratefully received.

If you use a Time Machine connected to your router, you can limit the time on that and when it can kick certain devices of the internet between certain times.
I would happy to go through the set up of this with you if you would like.
Other than that there maybe some add-ons / free software however if she's clever enough she could disable them.
I hope this helps

How to block internet access for RDS and RemoteApp users?

Hi everyone,
This question might partially belong to security forum but I think anyone using RDS services comes across this. I would like to TOTALLY block all internet access including "updates" to any software, windows updates, anti-virus updates, TCP, UDP,
or ANY other protocol out of the server. I would like to only allow traffic both ways for established traffic (e.g. accessing the remote apps).
How can I achieve this without involving a third party firewall software?
Thanks

In our visitor center, we setup a computer with fake proxy server and add our website to the exception so that the visitors access our website only and no other website. If this RDS is for internal use only, you may disable default gateway. This link may
give you more options.
how to
restrict internet access
How to restrict Internet Access. You may have many options to disable a user or
computer to access the Internet. Some options can be adopted for many users
www.chicagotech.net/Internet/restrictie0.htm
Bob Lin, MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

How to increase internet access speed of OS X 10.5.8 whilst using telstra prepaid wirless broadband internet stick in Darwin, Australia

Is it possible to increase internet access speed of Mackbook Pro OS X 10.5.8 whilst using telstra prepaid wirless broadband internet stick in Darwin, Australia?
How can i do this?

Network Utility (in the Utilities folder) can tell you, in the Info pane, what speed you are actually connecting at.
Just set the interface to the one you are using (which may show up as en2 or something). Link Staus and speed are shown along with error counts.
If the data rate is very different from what you expected, you may have it manually set to a lower rate.
YouTube files are enormous -- that may be the best it can do.

How to disable internet access during Adobe AIR installation

Hello,
I am trying to install Adobe AIR in an enterprise environment on numerous clients.
Unfortunately the installation procedure always tries to open an internet connection during installation.
As all users in our company require proxy authentification for internet access, the authentification dialog of our proxy always shows up when installing Adobe AIR. So the installation can not be processed without any user interaction.
We would like to install Adobe AIR silently in the backround. So we are looking for an opportunity to disable the internet access during AIR installation.
Thanks for any help,
Alex

Hi Alex,
You might want to give the Settings Manager a try (located at the bottom of this page.) However, I suspect the network might still be pinged regardless of this setting. Please let me know how it goes.
Thanks,
Chris

How to limit the access of a transaction

please provide hw to create an authorization object... like hw to limit the access of a particular userdefined trasaction to a particular user

hi
good
Element of the authorization concept.
Authorization objects allow you to define complex authorizations.
An authorization object groups together up to 10 authorization fields in an AND relationship in order to check whether a user is allowed to perform a certain action.
To pass an authorization test for an object, the user must satisfy the authorization check for each field in the object.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
Basic form->
AUTHORITY-CHECK OBJECT object
ID name1 FIELD f1
ID name2 FIELD f2
ID name10 FIELD f10.
Example
Check whether the user is authorized for a particular plant. In this case, the following authorization object applies:
Table OBJ : Definition of authorization object
M_EINF_WRK
ACTVT
WERKS
Here, M_EINF_WRK is the object name, whilst ACTVT and WERKS are authorization fields. For example, a user with the authorizations
M_EINF_WRK_BERECH1
ACTVT 01-03
WERKS 0001-0003 .
can display and change plants within the Purchasing and Materials Management areas.
Such a user would thus pass the checks
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' FIELD '0002'
    ID 'ACTVT' FIELD '02'.
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' DUMMY
    ID 'ACTVT' FIELD '01':
but would fail the check
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' FIELD '0005'
    ID 'ACTVT' FIELD '04'.
To suppress unnecessary authorization checks or to carry out checks before the user has entered all the values, use DUMMY - as in this example. You can confirm the authorization later with another AUTHORITY-CHECK .
thanks
mrutyun

How to configure Internet access?

Hello !
I'm running Solaris 8 now and would like to know what I must do to get Internet access.
I have a (hardware) Internet router in the network which I use from all the other (Windows-) stations in the network and which I can ping from my Solaris machine...
What's next?

Put the address of Ur router in the /etc/defaultrouter file.
Check the /etc/nsswitch.conf file and see that the host entry in it has a "dns" infront of it , apart from "files".
Make entries of Ur nameservers in /etc/resolv.conf

How to share internet access from iPhone with home LAN

Hello,
Sorry if this has been asked before, but I just bought an iPhone and am trying to use it to provide internet access to a LAN at my cottage where only dial-up is possible with my ISP. Although this is easily accomplished by enabling internet sharing on my iMac and plugging it into my router's WAN port, I do not have any access to my IP printer or to my SONOS music system. Any pointers?
Thanks,
Martin Girard

Well, getting internet access for my iMac is straightforward using USB tethering (I live in Canada, no AT&T crap). Then, I can share this connection with other computers (via ethernet in my case) by enabling internet sharing (in the Sharing control panel). My problem is that once I plug my iMac in the WAN port of my router, I can't access my LAN anymore. Any ideas???

Join computer in Domain and how to get Internet access in Joined domain computer

Dear System Admins,
Actually I am new to this forum and I need help. Let me explain you my scenario. Ours is a small company and I have configured Cisco router with dedicated Public IP. So the private IP default gateway is 192.168.50.254 and DNS is 218.56.43.22 "DNS is
given by ISP". Now what I did is I have configured IP address to server 192.168.50.1/24. Default Gateway IPv4 address 192.168.50.254 DNS 218.56.43.22 on Windows domain server computer. Internet is up on Windows Server. Also I have setup Active directory
successfully. Now I want Windows 7 computer to Join the domain and also it should be able to access to Internet. Let me know how to configure Windows 7 network properties and how to join domain. Please explain me in simple way step by step process. Thank you.

Dear Arnav,
I have configured DNS as 218.56.43.22 in windows server computer which has given by our ISP and
internet is available in server. For users who wants top join domain. I have configured IP details are as follows.
1. Windows 2008 Server IP details
192.168.50.1
255.255.255.0
192.168.50.254
DNS: 218.56.43.22 <--- Given by ISP with Dedicated Public IP
Now comes the Windows 7 computer which has to be join in domain for that how should I have to configure Network properties of Windows 7 computer? let me know. Windows 7 IP details are as fallows:
IPV4 address 192.168.50.2
Subnet Mask 255.255.255.0
Default GW 192.168.50.254
What about DNS? What should I configure in DNS box network properties for Windows 7 user. Shall I enter Windows Server IP details 192.168.50.1 or "DNS 218.56.43.22 <----which is given by ISP" . Let me know further procedure in order
to "Windows 7 user join the domain as well as user should be able to access the Internet. At present I have only installed active directory in widnows 2008 server. Whats Next? please feel free to ask me. Thank you.

How to limit ftp access to single directory with lion

I am setting up an sftp server on a Lion system and I would like to know how I can limit a logged on user to a single directory. I am using the ftp daemon that comes with Lion. I start my ftp server using the following command:
sudo launchctl load -w /System/Library/LaunchDaemons/ftp.plist
I am using FileZilla for a client that will be run on a mac running Lion or Leopard.
I have seen threads on this but they are from 2009 and don't help with Lion.
thanks for the help
john

Hi, Did you find any info?
I am also looking for similar solution.
I am not using FileZilla, but just want to know how to setup a particular user on to access only a certain folder on MAC when logged in via FTP. They can log in by command line or any FTP utility from another PC or MAC or other Unix OS.
Please let me know, if you find something. I will share some info.

How to provide internet access for a site collection in SharePoint Foundation 2010

Hi all,
I am working on SharePoint Foundation 2010. I have to make a site collection available on internet.
Only one site collection is to be brought on internet rest of the site collections should not be accessible from outside.
How do I achieve this. Any help is greatly appreciated.
Thanks in advance.

Hello,
As per my knowledge, you have to create new Web Application for your site to publishing it to internet. Since internet settings can be done at web application so create new one and then backup your existing site and restore in new web app.
You can refer below thread for licensing:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b63b3643-d0c7-45d2-8372-364fda348ed0/sharepoint-foundation-licensing-on-internetfacing-server?forum=sharepointgeneralprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to limit file access for different users in 10.7.4 Server

We had everything working perfectly with an earlier version of Lion Server. The update to 10.7.3, or 4, seems to have opened access to all files for all users. Much to our surprise, this wide-open access started without warning.
- We have an external drive that contains all of the company's archives
- We had set access for one employee to get to the files he needs, and different access for another employee. Neither saw sharepoints outside of their access settings.
After an update, each employee can see and log in to all sharepoints. There doesn't seem to be a way to limit access for each employee now. I can set 'read' access for one employee, but it doesn't stop the other employee from accessing that sharepoint/folder.
Is there some new way to go about this? Or is something simply broken with the current release?

That is good to know. If the file share is seeing the drive and ignoring its permissions, that is why everyone can see everything. I have found, in Lion Server, that it is best to get the permissions set before turning on File Sharing. I don't know if you have the luxury of turning the file share off for a little while, but I would unshare the drive and see if the issue persists if you plug the external drive into another machine. The settings for permissions are set on the file or folder itself, so the issue should follow you to the other machine.
Again, if you can, I would unshare the drive and reshare it with the permissions that you want and turn file sharing back on. However, if you can get the drive to respect permissions rather than ignoring them, I think it will save you a lot of work.

DMS - locked status / how to limit security access

I have a couple issues with a security profile (customer service) we have defined for DMS. This profile is set up that when the document info record is in a "released" status, the customer service person has edit (CV02N) access. When in an "on hold" status, the customer service person does not have edit (CV02N) access. Further, the "Released" status is a "locked" status.
1) The Object links appears to be open for edit, regardless of whether or not we have the status "locked".
Also, the deletion indicator can be changed when in locked status. I am looking for all fields to be locked except for the status field. Customer Service should only be able to change status from "released" to "on hold", and should not be able to change anything else. Any suggestions on how to do this?.
2) The intention is that the customer service person can use CV02N to change a document from "released" status to "on hold". This is the ONLY change customer service should be able to make. However, once the status changes from "released" to "on hold", it seems there is an authorization check missing..... meaning now the customer service person is in "on hold" status and they should not be able to edit anything, but apparently they still have the CV02N access from the "released" status, and they can now also change any other fields, update object links and attachments before they save the document. What am I missing?
Any help would be greatly appreciated!!

Hi,
U can use following authorization objects to resrticts the document access
1.C_DRAD_OBJ - Create/Change/Display/Delete Objec
here in activity field dont check delete, change option, so that user can not change, delete existing object links
2. C_DRAW_TCD - Authorization for document activit
here in activity field dont check delete option, so that user can not mark DIR for deletion.
award points if useful
Regards
sham

How to Limit Learner Access by Person Type

My goal is to have a course or class for which only employees can self-enroll (contingent workers may not enroll). I am using the 11.5.10.2 EBS applications, where Learner Access can be controlled by individual learner or by position or job within an organization hierarchy. The OTA_EVENT_ASSOCIATIONS table corresponds to this structure, with columns for Job ID, Position ID, and Organization ID. Has anyone come up with a solution for defining learner access more flexibly? I found one Oracle Support note, 731227.1, where database triggers control administrative functionality within OLM, and I was wondering if triggers might also be useful for controlling who can enroll in a course (if person type is contractor, display a message, etc). I would be very interested to learn about creative solutions from the community. Thank you.

Unfortunately, I haven't heard of a good custom solution for 11.5.10, but I know of one creative extension using Learner Groups coupled with eligibility profiles in R12 that I thought was good. I can provide you with contact info for the developer that built it at a company that I used to work for if you're interested.

Internet Access for PDF Question

Hello,
I was using IE until an auto update last week. I am now using Firefox. I have a business site that I go on to complete report 'tasks'. When I click on the task, it should open the report in the same page. Now it is opening the report in a new PDF window. I can fill in the report, but when I click on 'submit', it goes no where. Saving the report and emailing is not an option as it needs to be submitted through the system. I have repaired, checked for updates and unistalled/re-installed adobe reader 11 as well as updated the adobe flash. The switch from IE to Firefox was recommended by the business site's support. Chrome/Safari are not available options. I have 'enabled' the adobe add-on in Firefox and allowed access to all sites in Adobe preferences. Any suggestions on how to 'enable internet access' from the site to adobe would be appreciated... thanks

Hello,
On Firefox, the adobe reader plugin for the 'portable document format' is set as default. I just changed the three adobe acrobat tabs under applications from 'use adobe acrobat (in firefox)' to 'use adobe reader' (default). The issue is my task/the pdf link is not connecting to the internet to send the data back. The task opens and I can fill it in, just cannot submit it back. This is the 'security warning' info that comes up:
'This document is trying to connect to:
file:///index.cfm?event=event.testPDFCompatibility
If you trust this site, choose Allow. If you do not trust this site, choose Block.'
Obviously, I click 'allow' but then this pops up:
Error openig URL to submit this form
thanks

How to limit internet access in dpc3925

Similar Messages

Maybe you are looking for