How to link 2 regions as a stereo file....

Hi. Is there anyway to link two regions together so they move and are cut together as if they were a stereo file? Thanks, Ben

Just group the two tracks together,under the mix window "group" menu.
When you create the new group make sure to select "edit" also,and then you will be able to edit the tracks together in the arrange window.
Cheers

Similar Messages

How do I bounce two mono split stereo files to one mp3?

Might sound like a stupid question, but I have several problems:
I bounced a waveburner-mix of my favorite songs as a split stereo file and inserted the two files in two logic mono audio tracks.
First problem: Do I have to pan the left audio-track left and the right to the right or do I keep them centered?
Second problem: The two tracks are louder than the original track. (no matter, if they are panned or centered. Shouldn´t the original have the same volume at my output-channel?
Third problem: Is it possible to bounce more than 2 GB with Logic 8? The mix is very long and when I want to bounce it, logic tells me that it is too big. Can I bounce larger files with logic 9 under OS 10.6?

Felix Bartelt wrote:
Last question remaining: Can I bounce larger files under Logic 9 and OS 10.7. or does L9 also have the 2 GB restriction?
No and no. The file size restriction is not Logics' restriction, it is a restriction of the file type itself. To be able to bounce longer and/or bigger files, use .caf.
From the manual:
+AIFF: The AIFF file format cannot handle audio file recordings larger than 2 GB:+
++For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 3 hours and 15 minutes.+
+For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 20 minutes.+
+WAVE (BWF): The WAVE file format cannot handle audio file recordings larger than 4 GB:+
+For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 6 hours and 30 minutes.+
+For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 40 minutes.+
+CAF: If the size of your recording exceeds the above limits, choose the CAF (Apple Core Audio Format) file format, which can handle the following recording times:+
+About 13 hours and 30 minutes at 44.1 kHz+
+About 6 hours at 96 kHz+
+About 3 hours at 192 kHz+
+The bit depth and channel format—mono, stereo, or surround— *do not affect* the maximum recording size of CAF files.+

How to link two recording channels for stereo?

I have a zoom 6 interface which naturally records vocals in stereo with audition with its built in stereo
Mic. However, I have an external stereo mic which connects to two different inputs on my interface.
I want to link these two inputs in audition to record in stereo without recording two separate busses.
How can I do this?
Thanks!

You need to select a stereo input option in the channel sources choice on the track control panel (LHS). If it's possible to pair the two inputs, then this is where you do it.
Alternatively, just don't bother! Simply record two mono tracks and mix them down to a stereo track afterwards. Mind you, if you are recording vocals like this, then there really isn't a lot of point, as your voice is mono anyway, and you only really need a single output from the mic - one side or the other would do. If you are recording ambient sound, then okay, stereo - but you really don't need that for a single voice.

How to link into certain part of swf file through XML?

Hi,
I wonder if we can use XML to link into certain section of a SWF file?
I have purchased a carousel which is composed mainly by AS3 and XML, it contains of 6 images linking to 6 different section of a swf file. From where should I modify to add-in the sub-button onto the carousel image? How should I modify the XML when I click on the sub-button, it will link into certain section of a swf file?
Looking very forward to any of your help! Many Thanks in advance.
Regards,
Evwo

Ready - made carousels usually need very little customization work limited to uploading your own images and writing the path to them in the xml file, you're supplied with.
Some carousels will include options for customizing the text displayed in the buttons. You just need to look for this section in the xml file and change the text accoridng to your needs.
For example if you have the following xml:
<thumb
type="image"
imageURL="/path to image on the server/image1.jpg"
captionText="caption text"
captionText2="caption text"
/>
you can specify 2 texts for image description and it's place on the server
Emil Georgiev - Flash and Web Design

How to create MS (Mid Side) tracks from a stereo file

Hi everyone.
Can anyone tell me how to create MS tracks from a stereo file?
I used to do it on old analogue desks but can't figure how to it in logic.
Would appreciate assistance.

Hi guys. Here's what I'm really trying to do...It's to do with digital - DAB - radio.
I've noticed on DAB radio that certain songs exhibit weird and severe loss of stereo image. e.g.
When listening to "Riders on the Storm" by the Doors the keyboard solo goes missing. Totally vanished, bar a weak reverb remnant.
When I first heard this problem it reminded me instantly of an experiment I made with MS encoding on an analogue desk with that very track some years ago: which I mentioned in my first thread.
I'm not attempting to use MS here for a positive purpose. Quite the reverse! It is the INCONPATIBILTY that I am after.
DAB is broadcasted in the UK using MP2 encoding, which divides the spectrum into 750Hz portions. That makes 13 portions, roughly, if you divide 750 into 10000. I've just set up 13 versions of Riders on the Storm and have bandwidth limited each accordingly: 20 Hz-770 Hz, 770 Hz-1520 Hz, 1520 Hz-2270 Hz etc.. Low and behold, weird things are already starting to happen to the stereo image. Jim Morrison's vocal exihibits a 1.5 second time delay (i.e. loss of reverb intergity, reverb transformed into a discrete one beat time delay) when all thirteen tracks are played together. Now I'm going to try MS encoding this to replicate the way DAB would send these chunks across the airwaves.
If you've got time, try it too! And please give me some more tips on how to create MS from stereo files.
Best.
Power Book G4 15 Mac OS X (10.1.x)
Power Book G4 15 Mac OS X (10.1.x)

HOW TO LINK PAGE IN TEMPLATE EDITABLE REGION

Hi to all friends out there .I am new to this .I want to know how to link existing page or link in editable region of template.Please guide me.
My template is ready but i do not know how to link existing pages in editable region of template.
Every help is appreciated.if code also you can show me than it will be helpfull.
Thanks in advance.

Editable regions are for content that will change from page to page.
Anything outside the editable regions will appear in all pages spawned from the Template. This gives your site a consistent look.
Ideally, you want to put common menus, headers, footers and sidebars into NON-EDITABLE regions, right?
Open main Template (.dwt) file.
Highlight menu item.
On the properties panel there is a link field with a small folder icon next to it.
Click the folder icon and browse to the site page. Click OK.
Repeat with additional links. Save your main Template.dwt file and populate changes to child pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to - link from HTML Region to Report Column?

Dear Apex gurus,
Ok, I'll go straight to my question. I have a file upload page with Report Region (conditional) which comes up after file uploading process. Under Report I have a column to delete uploaded file (column has an image in link, target in application, item name: P2_DELETE_ID and value: #DOC_ID#). Basically the Report picks up just uploaded file ID and allows me to delete the file by having Hiden Page Item (P2_DELETE_ID) and Before Header Process:
BEGIN
DELETE FROM EBA_ASSET_ORDER_TEMP_DOCS
WHERE doc_id = :P2_DELETE_ID;
END;with condition: Value in Expression 1 is Not Null, and Expression 1 set to:
P2_DELETE_IDI have and another conditional Region (which is HTML) and it comes up after file uploading process as well. The region Source is:
<div id="FinalMessage"></div>
<br />
<div ><a href="javascript:confirmFileDelete(htmldb_delete_message,'f?p=&APP_ID.:2:&SESSION.:REMOVE_ID:::P2_DELETE_ID:#DOC_ID#');"><img >src="/i/delete.gif" style="position: relative; top: 1px;"/>Remove Uploaded File</a>
</div>where id="FinalMessage" - is the Sucess/Error message from JS
and .....href="javascript:confirmFileDelete....... - is my actual question. So, I am trying to hide my Report Region and show only my HTML region where I will be able using this (.....href....) link delete file from my table. I am able to dele file using report colum link but my .....href.... link dosnt want to delete my file, doen't even want to pick up file ID. Is there a way where I can link my .....href.... link to pull from Report Column????
Thanks

I am getting crazy now:
It gives me an error message whan I am trying to add RETURN to my process, here is my process, seems to be fine and I can fined what is going on, may be I am blind:
DECLARE
n_size NUMBER;
v_filename VARCHAR2(500);
P2_FILE_INPUT VARCHAR2(1000) := v('P2_FILE_INPUT');
BEGIN
INSERT INTO EBA_ASSET_ORDER_TEMP_DOCS (DOC_ID, NAME, CONTENTS, mime_type, CREATED_ON, DOC_SIZE, FILENAME)
SELECT ID, P2_FILE_INPUT, BLOB_CONTENT, mime_type, CREATED_ON, DOC_SIZE, FILENAME
FROM apex_application_files
WHERE NAME = P2_FILE_INPUT
RETURNING DOC_ID INTO :P2_DELETE_ID;
DELETE apex_application_files
WHERE NAME = P2_FILE_INPUT;
END;error:
1 error has occurred
ORA-06550: line 13, column 38: PL/SQL: ORA-00933: SQL command not properly ended ORA-06550: line 10, column 4: PL/SQL: SQL Statement ignored
Edited by: Yasen® on Oct 5, 2009 3:28 PM

Adding and linking report region to a page with an existing report region

I have page that has a report region. It is based on a master table.
I want to add another report region to the same page for the detail.
I have added the region of tpye HTML and entered the query in the source section.
How do link this detail region with the master region. That is join the detail to query after the master based on the master row selected.

This tutorial should help you:
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/rprt_drill.htm#CIHGBADI
It shows how to do it using two pages, but putting both reports on one page is pretty much the same.

How to convert false (dual mono) stereo files ?

I imported an enormous amount of regions from a Final Cut Pro project, and because the cameras each had mono mics but were recording audio in stereo, all the audio files are technically stereo, but contain only mono information.
So I've got hundreds of stereo-interleaved files in my Logic session, but each file contains only mono information, so my project is twice the size it needs to be.
Can anyone suggest a way to remove all that redundant information ? What I want to do is split all the interleaved files, then select all the .R files and delete them, but I don't see any way to accomplish this in Logic, other than file-by-file (I have 500 of them...)
Anyone been down this path ?
Thanks!
-James

Hey, thanks for all the suggestions, Seeren!
I'm not sure how your method is generating only .L files for you--when I split interleaved, I always get both sides... but not a big deal. It's easy enough to delete half the audio.
The real problem is getting the files replaced without losing all the arrange work: your method requires manually replacing the old stereo files with the new mono files in the arrange, which would be a ton of work in large projects like mine...
But... I did find a solution to this--it's not exactly elegant, though, because it requires some filename hacking:
Turns out if you have a reference to a stereo interleaved file in your project, and you replace it with a mono file of exactly the same length and filename, Logic will happily accept the substitution without a complaint. So the way to replace all the stereo files with the .L files is:
1) Copy the stereo interleaved files into split stereo, then remove the new split stereo files from the audio bin (but leave them on disk)
2) Close the project
3) Remove the original stereo files from the "Audio Files" folder, and delete the .R files.
...that's all easy... then...
4) Rename all those .L files, removing the .L so they have the same names as the original stereo files
5) Reopen your project--Logic will now refer to the new mono files, not the original stereo files
Step #4 requires some hacking to do efficiently: I used the command line to rename all those files quickly. There are probably utilities out there that could have done the job with a GUI, and AppleScript could probably do it, too.
Anyway... this works, if it's helpful to anyone else.
But ultimately I guess this is a feature request: it's cool that Logic makes it so easy to manipulate split stereo files as a single unit. But there are occasional times when you need to manipulate stereo files individually. There should be a track command in the arrange that takes a stereo track and replaces it with two mono tracks... rather surprising this doesn't seem to exist (it's one mouse click in ProTools [ducking])...
-James

How to link channels in audiomixer

I'm searching for a long time now,
can't find how to link audio channel A to channel B.
Timeline: 2 audio channels appear under video, recorded by stereo-mic on camera.
By clicking 1 track I want to see them both in the viewer-area.
When adding a keyframe, it has to appear in both channels.
Audiomixer: By moving slider A, slider B has to move as well.
I want them to be linked, like the gang-button in AVID.
Thanks. PR.
Message was edited by: peter.roek

highlight the two audio channels then in the (modify) pullldown menu, click stereo pair

How do you save a stereo file of your 8- track mix, to obtain more tracks. ( jayco62)

How do you save a stereo file of your GarageBand mix, to increase the # of tracks you can record?

In the Bounce Window, choose "Split" instead of "interleaved" from the File Type menu to bounce your mix as separate mono files
Regarding the gain correction, use Automation
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Did you know how to link the text in two or more text boxes?

Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

How to link SAP Application to Digital Signature

Dear all,
As per the sap note 593041,594010 and 827417 we have done the config setting and executed program DSIG_BOOKING_EX
in tcode DSAL we are getting the message "Signature process was successfully completed by user" please suggest us
how to link this to any SAP application ( Ex. Check printing ,PO Printing.) we r using script for printing these application.
Regards,
Nikhil

Hi Nikhil,
please refer to this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0fbaa71-cd8d-2910-5982-e30626035400&overridelayout=true
Best wishes,
Jan

How to link a document in Framework

In CWB Home Page there is ability to link to various URL.
I know how to link to a Portal. But I need to link to a Document (Word or PPT) which is located in Shared Servers.
If this is possible , How do I write the full Path which includes the document?

Hi,
I am not sure whether I understood your requirement clearly.
If you just want to link a document to your service desk message, you can easily attach the document to the "attchmnt" tab of the "notif_create" transaction, if you are using "notif_create" to create your service desk message.
(ii) If you are using "crm_dno_monitor" transaction, then you can upload the document in the "documents" tab of this transaction.
(iii) But, if your requirement is that that you have to upload the document in the Solar01/Solar02 transaction and only have to link to your service desk message, then you can generate the URL of the uploaded document and attach it using the "My Network Places" button of the "Open File" dialog (that comes up by clicking the "export" button of the "attchmnt" tab of the "notif_create" transaction) and specifying the URL in the "File Name" field.
(iv) If the requirement is the same as in (iii), but if you use "crm_dno_monitor" transaction, the same procedure can be followed in the "documents" tab of this transaction or else we can also use the "create URL" button of the documents tab.
Hope you know the procedure for generating the URL of the uploaded document.
Dont forget to reward for useful answers.
Best regards,
Alagammai.

How to link Interactive fields in acrobat 9Pro

Hi Im new in this and I would like to now how to link interactive fields in acrobat.
lets say that I have 10 files (File1, File2, File3 etc......) and each file have the same COMBO BOX that display 5 options (option 1. option 2, option 3, option 4 and option 5), all 10 files have the same combo box with the same options, but i want to DELETE option 3 from each file.
So, how can I do it, beacuse right now I have to do it manually each file at the time, and in real I dont have 10 files I have 500.
Please I would appreciate any help.
Thanks.

I am not so sure yet but in the PLD properties window on general tab of SBO 2005A there is field name link to. its description is :
Creates a link between several fields, to determine if the system collectively displays or hides them. If a field is blank or hidden, its linked fields are not printed either.
To create the link, choose the Unique ID of the field to which you want to link the selected field.
If the field Total Liable in the document is set to zero there is no need to print the Tax, Discount, and Total fields. It is possible to link these fields to the field Total Liable by selecting its unique ID in the field Link to, found in each one of their Properties windows. This will then hide the fields when Total Liable is zero.
If a linked field is not yet calculated, the field is ignored.
Another example:
Steps for Version 2005A:
Link every existing field in the Repetitive Area
to itself (thisinlcudes hidden fields as well!)
add the following fields to the Repetitive Area
Field_1:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content/Variable Tab
Variable No.: 157
Field_2:
General Tab
untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
Field_1 ==' '
Increasethe Height of the Repetitive Area to allow placing the following field vertically below the exisiting fields of the Repetitive Area - tick Height Adjustment for the Area!
Field_3:
General Tab
Link to: Field_2
Left = / Width = / Top = / Height =
=> place vertically below the top row in the Repetitive Area
Format Tab
Line Break: Divide into Rows
tick Field Height Adjustment
Content Tab
Source Type: Database
Table: AR Invoice - Rows
Column: Text
Maybe it is what your are looking for.
BTw, Do not you have the custom PLD pdf file ? You could download it in the documentaiton resource center or requesting it to SAP partner.
Rgds,

How to link 2 regions as a stereo file....

Similar Messages

Maybe you are looking for