How to link a custom BADI with standard report.

Hi All,
I have a requirement to create a Custom BADI and to link it through the Standard Program. How to do this. As i cannot modify Standard Program.
I have put some checks in custom BADI, which i want to be done before anyone runs standard program. I have a doubt of how to do this in between (before executing Standard Program) as i cannot use my Custom BADI in Standard Program. Then how to trigger the BADI and where. Is there any way to accomplish the same ?
Thanks in advance.
Regards,
Neha

Hi Neha,
I am stuck to the same problem. if you have got the answer please share it.
Nilesh

Similar Messages

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

How to add a custom code to standard sap menu

Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juan

Hello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Integrating Custom page with Standard Page

Hi
My Doubt is,
i m working on iRec Module.
i m integrating Custom page with Standard Page , Is it will affect the Background running Workflow.
Thanx

Hi 781261,
It seems you are familiar with OTN forums, based on your profile.
165 posts, 50+ questions and 15 unresolved.
I hope you know forum etiquettes(you can refer http://forums.oracle.com/forums/ann.jspa?annID=914).
Close your previous threads if they are answered/you got out of the issue yourself.
One of your unclosed threads is:
Re: Can we Fire PPR on DFF?
regards,
Anand

How to link the Business Partner with the SAP User ID.

Hi,
We are working on a scenario wherein the resources are created as Business Partners in R/3.
now How to link the Business Partner with the SAP User ID.

HI AP,
Maintain the business partner in role Internet User - BUP005.
Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
You can now see the link in table HRP1001.
Cheers,
Rishu.

How to link one scroll bar with two dynamic text boxes.

How to link one scroll bar with two dynamic text boxes.
If i move scroll bar in one text box,automatically text will
be moved in another text box.But scroll bar is not visible.
Can you please help me.
Thanks in advance.

See the following article:
JavaScript - setFocus Method for tabbing to next form field
And see if iOS can even handle the sample form.
iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

How to Assign Customized BADI to Standard T.Code Example ME51N

Dear all,
It would be really appriciate if you provide me a solutions.
I have Created Customized BADI using SE18,SE19. But I am not aware How to Use those BADI in Standard Transaction.
Example : I have Created PR Related BADI (ZPURREQ_ACC_CHK). How to utilize this BADI In ME51N,ME52N.
Please advice me.
Thanks
Best Regards,
KSK

I think what you need to do is find what exits or existing BAdIs are available for the transaction. Then in the user exit you can call your customized code. That way you avoid changing SAP's code for the transaction. You can find BAdIs related to purchasing by going to transaction SPRO and then following this path:
Materials Management -> Purchasing -> Business Add-Ins for Purchasing
I hope this helps.
- April King

How to create a custom kernel with initrd and ARCH patches

Hi,
I like the default kernel because everything seems to work well and I think the Arch kernel includes patches I need (such as the mactel patch). But some options that i would like to be enabled are not. in fact i would like to use powertop but i can't because it needs the CONFIG_TIMER_STATS option.
What I would like is a kernel based on the arch kernel but with a different config file. Nothing more.
if i look at the solution on the Wiki, I see that I have to add all patches the standard kernel have ... Moreover there is no initrd creation. i think i will need it if I use the Arch kernel configuration.
And if i use the kernel26 PKGBUILD, I must change the package name in order to keep my current kernel. It's easy to do in the PKGBUILD but much more complicated to do it in the kernel26.install file beacuse I have to change the filenames in /boot and I do not want to replace the kernel26 files.
So do you have any ideas how to compile my custom kernel ? Is there a better solution ?
Thanks.
Mildred.
Last edited by mildred (2007-07-03 01:46:33)

tomk wrote:It's possible I'm missing something here, but I don't understand what you're worried about. If I understand correctly, you now have a PKGBUILD and associated files for kernel26mildred (or whatever you've decided to call it). Why do you think you would have to change the files again when kernel26 is updated?
don't the patches change from version to version?
anyways, i was bored so i wrote a little script... edit the configuration variables at the top and it'll do the work for you. just put it in /var/abs/kernels or wherever you have the kernel26/ at, chmod +x scriptname, and run.
if you're in /var/abs/kernels you'll probably have to run as root.
from my testing, it seems to be all working (looking at resulting files and no errors so far from makepkg); but i'm still building my test kernel with it.
#!/bin/bash
# Author: kano <[email protected]>
# Configuration #
appendname="-custom1" # Name to append to kernel package
BUILD=0 # Build package when done? No = 0; Yes = 1
#MAKEPKGOPT="" # Uncomment if you're building after you make; Add any options you want passed to makepkg (can be nothing)
# Work starts here; shouldn't have to edit anything below #
mkdir kernel26${appendname}/
cp kernel26/* kernel26${appendname}/
regen_md5sum() {
if [ ${file} != 'PKGBUILD' ]; then
echo "Regenerating md5sum for ${file}"
cat kernel26${appendname}/PKGBUILD \
| sed "s/'`md5sum kernel26/${file} | awk '{ print $1 }'`'/'`md5sum kernel26${appendname}/${file} | awk '{ print $1 }'`'/;" \
> PKGBUILD.tmp
mv PKGBUILD.tmp kernel26${appendname}/PKGBUILD
fi
for file in "PKGBUILD" "kernel26.preset" "kernel26.install"; do
echo "Editing ${file}"
cat kernel26/${file} | \
sed "s/kernel26/kernel26${appendname}/g" \
| sed "s/vmlinuz26/vmlinuz26${appendname}/g" \
| sed "s/kconfig26/kconfig26${appendname}/g" \
| sed "s/System.map26/System.map26${appendname}/g" \
> kernel26${appendname}/${file}
# Regenerate md5sum
regen_md5sum
done
for file in "config" "config.x86_64"; do
echo "Editing ${file}"
cat kernel26/${file} | \
sed "s/CONFIG_LOCALVERSION=\"-ARCH\"/CONFIG_LOCALVERSION=\"-ARCH${appendname}\"/" \
> kernel26${appendname}/${file}
# Regenerate md5sum
regen_md5sum
done
mv kernel26${appendname}/mkinitcpio-kernel26.conf kernel26${appendname}/mkinitcpio-kernel26${appendname}.conf
mv kernel26${appendname}/kernel26.install kernel26${appendname}/kernel26${appendname}.install
mv kernel26${appendname}/kernel26.preset kernel26${appendname}/kernel26${appendname}.preset
# Add make menuconfig to PKGBUILD
cat kernel26${appendname}/PKGBUILD | \
sed 's/# load configuration/\n # configure kernel before build\n make menuconfig\n\n # load configuration/;' \
> PKGBUILD.tmp
mv PKGBUILD.tmp kernel26${appendname}/PKGBUILD
echo "Custom kernel pkgbuild created."
# To build or to not to build?
if [ ${BUILD} -eq 1 ]; then
cd kernel26${appendname}
makepkg ${MAKEPKGOPT}
fi

How to link ship-to-party with sales area

Hi,
Suppose sold-to-party is defined with sales area/ sales org./dist. channel/division.
It is possible to link ship-to-party with sales area/sales org./dist. channel/division.
dinesh

Hi
U can link the ship to party to the sales area in which the sold to party was defined
Use the tcode XD01 and create the customer with the account group 0002(according to the standards) and assign the ship to party in the master data of the sold to party ,
then u will find the ship to party partner function created in the same sales area created in the sold to party sales area in the partner functions of the sold to party
settings:
Transaction code: XD01
Account group: 0002
sales orgranisation/distribtiobn channel/ division
hope this is useful

Calling custom badi in standard transaction

Hi,
Badi is used for enhancements . To enhance the sap standard things there will be some badi definitions avilable .
To activate that definitions we have to implement the badi.Some times we will define the badi in se18 and we will implement in se19. How can we call the custom badi which are created and implemented by us in standard transaction.
Regards,
karthick

Hi
The custom BAdI will be called when the BAdI definition is getting called.
You can put a breakpoint in any method of your custom BAdI, if the BAdI definition is getting called then it will stop at your breakpoint.
You can also check the BAdI definitions which are getting called by putting breakpoint at method get_instance of class cl_exithandler.
Best Regards,
Nikhil Patil

How can link the accosaries requirements with production planning

"I am in cable manufacturing here i have a problem in accessories requirements ( dies,Nozzles,Rollers,Embossing wheels etc )link with production planning,at the time of production than these material required for production Can any body tell me how to link this ,accessories is not consubles "
Thanks,
Anurudh singh

Yes you can use PRT for these requirments,
Logistics - Production Process - Master Data - Production Resources/Tools - Production Resources/Tools - Equipment - Create.
spro->production planning for process industries->master data->production resources/tools (PRT)
you will see 5 transactions to configure your settings:
-define PRT auth.grps
-define PRT status
-define Task List Usages
-define PRT Group Keys
-Define Overview Variant for Where-Used List/Mass Replacement

How to link an subvi(worksheet) with another VI

hi,
I want to know how to link worksheet data with another VI's block diagram? ie i want to use 3 data's collected in the worksheet block diagram changed into a subvi and this subvi should be linked to another block diagram that accepts these 3 inputs to give some warning.
Please help me how to link these two ........:...............
Solved!
Go to Solution.

Sorry but I'm confused by most of your statements. There is a worksheet in Excel and a block diagram in LabVIEW but there is no such thing as a 'worksheet block diagram'.

How to link a custom BADI with standard report.

Similar Messages

Maybe you are looking for