How to link a plant to a business partner?

Hi,
How to link a plant to a business partner? I mean, how to create a relationship between a back end Plant and a business partner in SRM?
Thanks.

Hi,
When you replicate plants from back end by running the report BBP_LOCATIONS_GET_ALL  using the transaction SA38 the replicated plants can be seen in BBP_LOCMAP table in SRM.
Once replicated the plants will have BP number and Org ID assigned by the SRM system.No need to assign BP number to the plants manually.
Hope this makes you clear. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Similar Messages

  • How to maintain the contact person in Business Partner ?

    Hi Experts,
    Could you help to resolving the below Requirement.
    __  +Requirement:+__
    How to maintain the contact person in Business Partner ?
    How to get the Contact person in Is-Media Documents?
    Thanks& Regards
    Venkat

    Dear Venkat,
    In SD Customer Master data, we can maintain Contact Person in General Data tab page.
    For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
    Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
    (Or)
    While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
    If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
    Check from your end.
    Best Regards,
    Chandramohan

  • How to add a New Tab in Business Partner Transaction

    Hi Friends,
    Please help me out to "How to add a new Tab in Business Partner Transaction?
    Regards,
    Ricky

    Hi Rajendra,
    It will be gratefull to have some EEWB docuement.Can you please forward me ?
    Regards,
    Ricky
    Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM

  • CRM 5.0 - IC WebClient - ERP "Plant" to CRM Business Partner

    Hi Gurus
    We need to Download ERP "Plant" into CRM as a Business Partner with an External Number Range, using the Plant number as the "External" Number.
    Is there any documentation out there to assist with this?
    Regards
    Panduranga

    Panduranga,
    Read this thread
    How to load R/3 Plant, Customer, Vendor, all linked in T001W
    and OSS Note 865321.
    Good luck,
    Stephen

  • How to know who Deleted Item or Business Partner

    Hi all!
    In SAP B1, we have change log to track who updated information for Item master or Business Partner
    In case, one Item is deleted by user. How to know and control this.
    Thanks!

    Hi ,
    This query could help you in case of BP, Try it:
    SELECT CardCode,cardname,Deleted,usersign FROM ACRD T0 WHERE T0.[Deleted] ='Y'
    Same in the case of AITM.
    Thanks
    Ashutosh

  • How to create the Change Advisory Board business partner?

    Dear SolMan Gurus.
    How can I create a business partner Change Advisory Board and add a members to it?
    Thank you.
    Petr

    Hi Petr,
    just to make it a bit more clear, the Change Advisory Board (CAB) is not a type of a business partner, but a partner function. So you just need to create a standard business partner, e.g. an organizational unit as Prakhar suggested. Later on in your change document you can assign this org unit to the CAB-function. In another document the same org unit can be another partner function.
    If you want to enter a fix CAB-partner for a system you can do this in IBASE, transaction IB52. There are a lot of customizing possibilites for the determination of business partners.
    Kind regards,
    André
    Edited by: André Urban on Jun 2, 2009 11:54 AM
    Edited by: André Urban on Jun 2, 2009 11:55 AM

  • How to get Activities  connected to the Business partner .

    Hi Gurus ,
    How can be get all the activities attached to the Business partner .
    Regards,
    Naval Bhatt .

    Hi,
    in tx genil_bol_browser please search for an existing activity with searchobject BTQAct.
    click thru the child relationships (BTOrderHeader / BTOrderPartnerset).
    Here in BTOrder Partnerset you will find all the partners, for example the contact partner in relationship:
    BTPartner_00000009
    Is this what you are looking for? Otherwise please detail your question.
    Best regards
    Manfred

  • How to Enter the Mobile number for Business Partner

    Dear CRM ABAPers,
               I am creating the Business Partner Using the BAPI "BAPI_BUPA_CREATE_FROM_DATA".
    But I am not able to Enter the Mobile number for the Business Partner.Please help me how to Do this
    It is very Urgent Requirement.
    Thanks & Regards,
    Ashok.

    Hello Ashok,
             Using the same BAPI , set the field R_3_USER of the tables parameter TELEFONDATA to 3 to save the mobile number.
    Hope it helps.
    Thanks,
    Sriram S

  • How to update Credit profile of a Business Partner(BP) In ECC

    Hi,
    We have a requirement to Update the Credit Profile of a BP in ECC. I couldnt find a BAPI or a FM to update the credit profile of a BP. Any input on this will be helpful.
    Regards,
    Raj

    Hi Raj,
    Partner Profile - Defines the partner type with whom you communicate asynchronously via IDocs.
    T code used for maintanance : WE20 or BD82.
    Prereqisites ,( To configure the partner profiles)
    1. Master data must be available in the system for partners.
    2. A port is created to assign in the outbound partner profiles. (already configured)
    There are 6 types of partner profiles, namely
    1.Logical system - used for ALE. Used particulary for data exchange. Distribution od data in R/3 or ext. systems..
    2.User
    3.Vendor
    4.Customer
    5.Bank
    6.Business partner
    Partner Type - Partner type are used to classify the business system.
    Ex: Logical System (LS) for other SAP clients,
    Customer (KU), Vendor (LI) etc..
    Regards,
    P Bansal

  • How to Create an activity based on business partner

    hi guys,
    Can any body help regarding the below scenario.
    1) Creation an business partner.
    2) create an acitvity based on business partner.
    3) Create an lead and opputunity based on business parter.
    What are the function modules should we used to create the above three steps consequently.
    I need the function module for creation of BP , ACTIVITY,
    LEAD,OPPURTUNITY.
    Regards
    Viswa Guntha

    Hi,
    For creating a business partner, use the FM
    BAPI_BUPA_CREATE_FROM_DATA.
    For creating lead, opportunities and activities, use the FM CRM_ORDER_MAINTAIN. You need to handle the tables of this FM accordingly to create different kinds of orders.
    You can do it so by handling the PROCESS_TYPE of CT_ORDERADM_H in the changing tables.
    Regards,
    Karthik.

  • How to obtain Campaigns for the confirmed Business partner?

    Hi,
    Currently when we go to the campaigns view, we can see all the campaigns created in the system. Is there a way to obtain the campaigns relevant to the confirmed business partner.
    The Search object (MktRootCampaigns) contains only one parameter called "profile_id". (Campaign Profile attached to the IC Web client profile).
    This campaign profile is created in SPRO .... and attached to the IC Web Profile.
    The problem here is ... this profile allows setting of parameters statically in SPRO .....
    Example … we can mention in the profile parameters … “To show all campaigns with low priority”
    The other way is to enhance the BOL search object.
    I tried adding a new parameter to the search object MktRootCampaigns structure CRMS_IC_MKT_CAMPAIGN_SEARCH  to allow dynamic search of campaigns ....
    The structure CRMS_IC_MKT_CAMPAIGN_SEARCH does not allow enhancement of the search structure... since its enhancement category is "cannot be enhanced"
    I checked note 914809. But this structure does not allow me to change the enhancement category either.
    Any insight into this would be helpful.
    Kind Regards
    Vandana

    Hi,
    Something like this is given in the interaction center book. With call lists though ...
    campaigns and call lists use the same GENIL class.
    It should be of help.
    Regards
    Shivani.

  • How to link  discoverer report to E-Business  Suite

    Good day
    I followed instructions as stipulated in document number doc 278095.1 and doc 433397.1.
    However i dont understand the link between the two.Actual im still new in oracle.
    If i understand correctly doc 433397.1 is used to register the discoverer workbook to OracleOasis.RunDiscoverer
    package and i created the function using this parameter
    'workbook=XX_LEAVE_LIABILITY&PARAMFORM=HTML' ....I do not know if is necessary to put the inverted commas.
    and assign it to a certain menu .
    I have created another function following 278095.1 instructions but i do not know how does the two functions link.
    Because for doc 433397.1. the Properties tab TYPE is 'SSWA plsql function opens in new window (Kiosk Mode)
    whereas for doc 278095.1 is ''SSWA plsql function'
    and the form parameter for doc 278095.1 is ''workbook=XX_LEAVE_LIABILITY&PARAMETERS=sheet~1*' .
    The function name is there assigned to a responsibility but i can not access the discoverer report it retuns message "Unable to authenticate session'

    Hi,
    The ICX parameters can be updated by going to the System Profile form on the System Administor menu.
    Basically, the way the OracleOasis.RunDiscoverer function works is that it checks the ICX profiles from the user and builds a URL to start up Discoverer. It then adds to the end of the URL the workbook details from the form function so that the URL opens the workbook and supplies the parameters to the workbook.
    So if the ICX: Discoverer Use Viewer profile is set to Yes then the function takes the URL in ICX: Discoverer Viewer Launcher. Hence you need to check that this URL (which should look like http://<HTTP Server>:<Port>/discoverer/viewer) actually launches Discoverer. The ?Connect=[APPS_SECURE] needs to be added to this URL so that Discoverer is launched without the need to reenter username/password.
    It then concatenates the values in the ICX: Discoverer End User Layer and ICX: Discoverer End User Layer Language Override e.g. EUL_US to create the Discoverer EUL owner. The EUL parameter is then added to the URL so that Discoverer is started using this EUL.
    Finally, the value in the parameter field in the form function is used to add the worksheet selection and if necessary worksheet parameter selection parameters onto the URL.
    Rod West

  • How can i add new tab in Business Partner

    hi every body,
    Present i am working on SAP CRM 3.0 version. i need to add new tab in BP.  Here EEWB not available. How can i add new tab?

    Hi  babu,
    you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence  and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
    now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
    i hope this is helpful
    Rewards points if helpful
    Thanks&regards
    kishore kumar

  • Relation ship to prodcut and business partner

    hi,
    i have to find out the FM module to get the relationhip type of a product with business partner in service.
    for example : in commpr01 there is tab called 'Relationships' under that partner sub tab is there.
    there you can give BP number and relation type.
    internally there should be FM to assign the product to a particular Business partner.
    i need to find that particular FM which is updating these details.
    so please help on this if any one aware of this.
    thanks in advance.
    thank you,
    anil

    Hi
    Please go through the links ->
    COMM_PRODUCT -> Product table
    CRMD_PARTNER -> Partner data table
    Linking vendor to product category
    How to link a plant to a business partner?
    regarding business partner, central person and organizational unit relation
    What is the table name SRM which has the relation with Product_id and Plant
    Regards
    - Atul

  • BP change documents ( linking problem between Object id and Business Partner)

    Hi,
    We need to create a report for documents changed for a Business partner.
    This will be done in sap bw.
    on source side I have created the datasource with function module changedocument_read and I am getting most of the information
    which I want. Only missing part is Business Partner number.
    Can somebody suggest , how I would be able to link Object Id to business partner.
    I need to pull everything that is changed at BP level and the Object class selection around 30 in number.
    So I am looking for any standard function module which can provide me the link between Object id and Business partner.
    If I establish the rules to determine the Business partner from Object id , its getting bit difficult.
    Can somebody please help/suggest.
    I have gone through many documents and scn posts but unable to find anything on this.
    Thanks !

    Hi, looking at the change history header table CDHDR it seems that object ID simple equals the internal format of the business partner number.

Maybe you are looking for