How to link a table to a edit box
While Creating a addon there is a need for using the 'Define New' Option on a combo select and when clicked a new table opens .
Hi Sannaaa,
Welcome To SAP Community Network Forum
Post your thread on SAP Business One SDK Forum for better solution.
SAP Business One SDK
Thanks,
Srujal Patel
Similar Messages
-
How to link VBAP table to field IB SYMBOL
Hello,
How to link VBAP table to field IB SYMBOL
I have checked in transaction SQVI if any relationship exists between the
two tables but there is none
Is there any third table which is common and can be used to link VBAP and
IB SYMBOL
I require this bcz IB SYMBOL contain the charecteristic's of KMAT material
(configurable material ) which need to be printed in the o/p
Is there any other way i can link VBAP to get these characteristc's in the output.
Regards
Harish Madhavan
Edited by: Madhavan Harish on Oct 11, 2010 12:58 PMCheck with your Basis admin if it would be possible to back up and restore the data. They must have something in case of emergency anyway.
Changes in the table fields do not delete the data. I bet someone just used the Database Utility incorrectly and instead of doing the table adjustment with saving the data delete it (there is literally a radio-button for it). Just don't let people do this in Production and you'll be OK.
Also between DEV and PRD you should have another test run in the QA system. If it didn't work well in both DEV and QA I wouldn't ever put this changes in Production, to be honest. -
Hello,
I'm trying to create invoices with Pages, but my question is how can I link two tables in one Pages document?
Or having two Header Rows with some 'normal' rows between would also be great. (even better)
I'm trying to calculate my subtotal etc. below my overview of articles.
Thanks in advance!
Andy(1) no way to link two tables in Pages.
(2) you may have several header rows, several footer rows but you can't have standard rows between header (or footer) ones.
You may achieve what you describe without the asked feature.
Use correct ranges and you will be able to calculate subtotals.
Yvan KOENIG (VALLAURIS, France) lundi 28 décembre 2009 19:02:38 -
How to link a table cell?
Hi,
What would be the best way to link this table cell? I want the entire cell to be linked rather than just the text inside it.
<table width="160" border="0" align="right" cellpadding="5" cellspacing="0" class="backgroundbox-video">
<tr>
<td width="167" align="left" valign="top"><p class="navheader-lg">Video Clip</p>
<p class="navheader-sm">Watch a short<br />
testimonial video</p></td>
</tr>
Thanks so much
LauraHere is what I have in the style sheet...
.vidA a {
text-decoration: none;
display:block;
background-image: url(../images/videoclip-imageandcolor-tr.gif) no-repeat scroll right bottom;
background-color:#B1D6D5;
padding:10px;
.vidA a:link, .vidA a:visited, .vidA a:hover{
color:black;
.vidA a:hover{
background-color:#4AA3C9;
.vidA p {
margin:5px;
.audioA a {
text-decoration: none;
display:block;
background-image: url(../images/audioclip-imageandcolor-tr.gif) no-repeat scroll right bottom;
background-color:#B1D6D5;
padding:10px;
.audioA a:link, .vidA a:visited, .vidA a:hover{
color:black;
.audioA a:hover{
background-color:#4AA3C9;
.audioA p {
margin:5px;
and here is what I have for those tables...
<td align="right" valign="top" bgcolor="#FFFFFF"><table width="160" border="0" align="right" cellpadding="5" cellspacing="0" class="backgroundbox-video">
<tr>
<td class="vidA" width="167" height="100" align="left" valign="middle"><a href="http://www.12results.com/video1.html" onclick="MM_openBrWindow('http://www.12results.com/video1.html','','width=400,height=400');return false">
<span class="navheader-lg">Video Clip</span><br />
<span class="navheader-sm"><br />
Watch a short<br />
testimonial video</span></a></td>
</tr>
</table></td>
</tr>
<tr>
<td align="right" valign="top" bgcolor="#FFFFFF"><table width="160" border="0" align="right" cellpadding="5" cellspacing="0" class="backgroundbox-audio">
<tr>
<td class="audioA" width="167" height="100" align="left" valign="middle"><a href="http://www.12results.com/video1.html" onclick="MM_openBrWindow('http://www.12results.com/video1.html','','width=400,height=400');return false"> <span class="navheader-lg">Audio Clip</span><br />
<span class="navheader-sm"><br />
Listen to a 40 min<br />
interview about SAW</span></a></td>
</tr>
</table></td>
---I completely removed the styles for those tables (was background-video, background-audio) because all it had was the background styling (which you said to remove) and can't see any other reason to have it there?
So it's perfect except for the background images are not showing...so did I do something wrong in the fireworks/make transparent process do you think?
Thanks...
Laura -
hi ,
i need help on the below scenario ,
we have a web dynpro table with different columns, now based on new business requirement one of the column need to
dynamically editable or non editable for different row.
for ex :
Field 1
Field 2 ( Dynamic field )
Field 3
Field 4
Data 11
Data 12 ( Editable with Drop down )
data 13
data 14
Data 21
Data 22 ( Non editable )
Data 23
data 24
Data 31
data 32 ( Editable with drop down )
data 33
data 34
how to achieve this ? please help on this.
Thanks in advance
Thanks
ManishManish,
there is no proper way to insert two Cell Editors in a column(except variants), have a look on below scenario, it may help.
add one more attribute to your table context node for read-only.
create dropDown as celleditor for table and bind with newly created attribute to read-only property of dropdown.
before binding data to table, check the condition then mention readonly value abap_true / false.
@ we can achieve by the use of Variants.
for ex :
Data 11
Data 12 ( Editable with Drop down)
data 13
read-only - abap_false
Data 21
Data 22 ( Non editable, dropdown )
Data 23
read-only - abap_true
Data 31
data 32 ( Editable with drop down )
data 33
read-only - abap_false -
Hi,
How do we link (something like GL_SL_LINK_ID, SOURCE_TABLE) from
RA_CUST_TRX_LINE_GL_DIST_ALL to GL tables?
Thanks.hi,
you will have posting control id
the posting control id is the binding key for GL and AR related Tables.
1. Ra_cust_trx_line_gl_dist_all
2. ar_cash_receipt_history_all
3. ar_receivable_applications_all
4. ar_adjustments_all.
Hope this will clarify your question. -
How to Make a Table control Field Editable but input disabled
Hi All,
I got a requirement that in table control one column should be in edit mode (i.e. input enabled) but user should not be able to type anything in that field or column rather he can select the value from F4 help (or pick list) associated with that field or column. How to do this ? Please dont say make sceeen-input = 0 for that field.
Experts please help me out...........
Thankx in Advance
Rizwan Ahmad SiddiquiHi,
I suggest you to go for a drop down instead of a search help.
Regards,
Charumathi.B -
Table numbering confusion and how to link to tables in a book/document?
More questions :-(
Table numbering confusion...
I'm porting over (from MS Word) a document that has a bunch of tables in it.
The document currently looks something like this:
1 Major heading
1.1 Sub heading
text for that sub heading that refers to a table that follows (or may preceed) such as see Table 1-1 that follows
Table 1-1
Row 1/Column 1 content Column 2 content Column 3 content
Row 2/Column 1 content etc.... etc.
Row 3 etc. etc.
1.2 Next sub heading
Text to follow that sub head that references Table 1-2 below...
Table 1-2
Row 1/Column 1 content Column 2 content Column 3 content
Row 2/Column 1 content etc.... etc.
Row 3 etc. etc.
2 Major heading
2.1 Next sub heading
Text to follow that sub head that references Table 2-1 below...
Table 2-1
Row 1/Column 1 content Column 2 content Column 3 content
Row 2/Column 1 content etc.... etc.
Row 3 etc. etc.
3 Major heading
3.1 Next sub heading
etc.
Hopefully that makes sense.
Currently it seems that the tables are numbered based on the chapter number with the chapter apparently being set at 2.
I need the tables to instead use numbering based on the heading (Titles) numbers, but can't seem to figure out how to get the numbers set for the tables as I would want them to be.
What do I need to do to make the table numbers reset based on the paragraph numbers (subchapters if you would refer to them that way...)
Thanks again!What is the paragraph format of "Table 2-1" lines?
Table numbering is commonly controlled by two things:
1. Format > Paragraph > Paragraph Designer
[table title para name]
[ Numbering]
and
2. Format > Document > Numbering
The default in Frame is that tables have titles of para fmt "TableTitle", but tables can switch that off, and also be anchored to paragraphs (often Headings) of any arbitrary format name and numbering scheme. -
How to link LIPS table to VBPA table in infoset
I have created an infoset z_shipping using logical database 'vfv'. when i try to add table lips into vbpa i have found that the system is selecting single * from lips where vbelm and posnr field automatically. Is there anyway where I can select LIPS kdauf and kdpos?
its very urgent.
Azaad.U can link LIPS and VBAP in the following way.
Lips-VGBEL = Vbap-vbeln
Lips-VGPOS = Vbap-posnr.
Let me know if it is not clear.
Regards -
How to link NAST table with ADR6
Hi,
I need to extract the email adrress from ADR6 . I give output type , transmission medium and extract fax no from NAST.
can anybody provide me a link between ADR6 and NAST. Have tried usung address number. But somehow address number is not at all gettin populated. can anybody provide me the solution.Hi,
Mostly u can Avoid NAST table for Fax Number.
(NAST table mostly fax number not available)
So U use ADR3 table get the Fax Number.
ADR3-ADDRNUMBER = ADR6-ADDRNUMBER.
Reward if usefull.
Thanks,
Durai.V -
JavaFX2.2 TableView:How to make a table cell be edited without mouse click?
Hi,
I've encounter a problem with editable table cells. I'm using the TableView in my project just as the Tutorial on Oracle (http://docs.oracle.com/javafx/2/ui_controls/table-view.htm).
According to it, I use the setCellFactory method to reimplement the table cell as a text field with the help of the TextFieldTableCell class. However, I found the steps is a little complex to get to the point where the cell can be edited:
1.Let the table cell be selected by using direction key.
2.Press “Enter” to converts the cell to a text filed so that it is ready to be edited.
3.Clicking in the text field allows the contents to be edited
The problem is step 3, that you must use the mouse to click before you can input data in this table cell.
So, is there a solution to avoid step 3? That is the text field allows the data inputting when you just press “Enter”(step 2).
By the way, English is not my native language. Hope I have made myself clear.Hi,
You need to pass the focus to the text field when the startEditing event occurs. In the class that extends TableCell you use for cellFactory:
public void startEdit() {
super.startEdit();
createTextField();
setText(null);
setGraphic(textField);
* put focus on the textfield so user can directly typed on it
Runnable r = new Runnable() {
@Override
public void run() {
getGraphic().requestFocus();
Platform.runLater(r);
} -
How to link 2 table together?
Hi All - I'm a new APEX user and would like to create 2 tables - one primary table, where you input data in and a secondary table, where any update you do to the primary table goes to.
In the primary table - it consists of a primary key which is set to be generated. This primary key will be used to identify the entry later on for query purposes. This also have a variable (Number), which will be used later on as a foreign key to the secondary table to link the two tables together. Then couple of data fields to enter other things.
In the secondary table - I've also created a primary key for this table, set to be generated (this is used as the same purpose)
When I try to create a foreign key in the secondary table, using the variable (Number) from the primary table, I keep on getting an error and end up not able to finish the creation of the secondary table.
Any clue or any documentation anyone can point me too is greatly appreciated...Many thanks in advance.
Thanks,
JoyHi Joy,
There is so much wrong herre that I am not sure where to start except to recommend that you go back to basics and learn about relational database design.
Googling "relational database design", "entity relationship modelling" will turn up many references. Also, a trip to a good technical bookshop will also turn up many good books. Pick something that looks like it is aimed at beginners and which you feel you understand.
Regards
Andre -
How to link Infotype Table Data to Logical Database
We have historical data in one of our system brought by using diret insert queries on Infotype tables. Now, we are facing a problem that this data is not visible from PA20/PA30. Also, while using Logical Database in programs, we are not able to extract data from Infotypes using GET events.
Does anybody have any idea/solution to this kind of problem?What made you to take decision to make direct table updates? I am not sure if this was the correct way. Anyway, whether all the module pool programs are in place foe these custom infotypes. You dont have to do anything else to have logical database program to fetch data for custom infotypes. Check if eveything in PM01 is configured correctly.
-
How to link a table to a editbox
While Creating Addon in one field there should be a define new option and when clicked a new table opens
Hi,
Welcome To The Forum
Refer This......
[Table driven;
Thanks
Shafi -
How to link TCJ_Documents table with BKPF table
Dear all,
i am new ABAPer, i need to join TCJ_Documents table with BKPF table.
but, i can not find the relationship between this two tables.
so, please help !
thanks !Hi....
There is a company code (BUKRS) in both tables.
Also Fiscal year(GJAHR)...
What is the problem with that?
Sample code...
data: begin of itab occurs 0,
bukrs type bukrs,
cjnr type cjnr,
belnr type belnr_d,
end of itab.
start-of-selection.
select p~bukrs p~belnr q~comp_code from bkpf as p
inner join tcj_documents as q
on p~bukrs = q~comp_code
into table itab.
loop at itab.
write:/ itab-bukrs.
endloop.
Thanks,
Naveen.i
Maybe you are looking for
-
Why does Firefox Start page always says I need to update, but it is already updated.
Firefox Start Page always has this message: " You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" I open Help/About Firefox, and it tells me "Firefox is up to date." Version 6.0.2 Why do I keep getting a message to
-
Drop box problems -- black lines I can't get rid of
Hi there, When I drop any 16:9 footage into a drop box I've created (in an anamorphic project) I get small black lines to the left and right of the footage, even though the drop box is supposed to be 16:9 too. None of the options Fit, Center, or Stre
-
Trouble saving documents from Outlook to SharePoint 2010 library - missing tags
Hello One of our users is seeing a strange issue with saving documents from Outlook. It appears that the document already had tags from the library, but the user said the document was never uploaded to the library. All of the server tags show Curren
-
Authorization on pushbutton ..
Dear friends , i made a screen by which user can enter data in the table ..... i want that 'CHANGE' and 'DELETE' pushbutton only responde to only Authorized user for it and for the rest of the user it simply show a message " You are Not auth
-
Horizontal space under frame??
Hello, I have a animation rendering of frames at 1920 x 1080. After I apply a Depth of Field and glow effects to the sequence, a horizontal negative space appears at the bottom of the image. the only way I can eliminate the space is if I bring the De