How to link apple tv to itunes on macbook. apple tv will not play on tv.

Do I have a defective unit? Apple TV will not come on the tv or my macbook, my itunes on my macbook will not recognize it. Used several different HDMI cables and tried in all the differnt ports on the tv. Power light will come on the unit but will not show on either my tv or laptop.

The only way to get an ATV recognized on a computer is to physically plug it in via USB, has that been tried?
With the ATV connected to the tv, were all inputs toggled through on the tv?  Not just physically moving the HDMI cable from one port to another.

Similar Messages

  • ITunes Ver 10.6 Radio will not play behind firewall

    iTunes Ver 10.6 Radio will not play behind firewall while version 10.5 works just fine.
    I uninstalled and reinstalled a fresh version of 10.6 rather than just upgrading and still not working.
    Our Firewall is BlueCoat....
    Works just fine outside the firewall..
    Anyone have any suggestions?
    Thanks in Advance
    david

    Update:
    I also noticed that version 10.5 doesn't prompt for Proxy credentials while version 10.6 does...
    thanks in advance
    d

  • ITunes 7.1.1.5 will not play audio from inserted cd

    I have been experiencing an issue with iTunes on my PC. It will not play any audio from inserted discs. This includes burned discs and commercial discs. When I attempt to play the music the song will stay highlighted briefly, about 2 sec., and then it goes directly to the next song on the disc. This continues through the disc to the end. I experience the same issue when trying to import the disc.
    I have tried removing the iTunes application and doing a fresh re-install, but I have the same issue.
    Also, this is on a PC, and I am able to open the disc's in question and play the content fine within Media Player.
    Any idea's on this would be greatly appreciated!
    Dell Latitude D410   Windows XP  

    Here is my Diagnostics log:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Latitude D410
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    Connected Device Information:
    DiskDrive, FUJITSU MHV2040AH, Bus Type ATA, Bus Address [0,0]
    DiskDrive, Apple iPod USB Device, Bus Type USB
    DiskDrive, SanDisk U3 Cruzer Micro USB Device, Bus Type USB
    CDROM, TSSTcorp CDRW/DVD TSL462C USB Device, Bus Type USB
    Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
    D: TSSTcorp CDRW/DVD TSL462C, Rev DE01
    Audio CD in drive.
    Found 13 songs on CD, playing time 48:25 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:48:56
    Track 3, start time 07:49:53
    Track 4, start time 10:46:57
    Track 5, start time 14:11:62
    Track 6, start time 18:12:35
    Track 7, start time 21:35:67
    Track 8, start time 25:03:11
    Track 9, start time 28:05:61
    Track 10, start time 31:23:07
    Track 11, start time 35:01:65
    Track 12, start time 40:00:61
    Track 13, start time 44:30:26
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 20 24.
    The drive CDRW speeds are: 4.

  • ITunes store Download to computer will not play!

    I am downloading 9 symphonies from iTunes store to my computer - all symphonies and movements are listed but two complete symphonies and one movement are not ticked and will not play. I did not find iTunes support of any help - can anybody help?

    If you connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases then it should copy over to your iTunes library. Depending upon what country that you are in you might also be able to redownload it on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.

  • Upgraded to iTunes 6.0 now songs will not play

    I upgraded to iTunes 6.0, now when I go to play a song the run time shows up as a negative number and the song will not play. I reinstalled the software several times and reauthorized the computer. Does anyone have a solutions to this problem?
    Thanks for your help
    Dell Dimension   Windows XP  

    I should add that every time I remove the iPod from my computer to try and see if any of the songs are back it asks me for a language just like the first time you start it up. Kinda like it forgets everytime I plug it into the computer.

  • ITunes 8.2.1.6 will not play most of the songs in my library

    Since downloading iTunes 8.2.1.6 most of the songs in my library will not play on my computer. I am afraid to update my iPod for that reason. It is not album specific or iTunes purchased/cd ripped/ or internet downloaded specific either. Has affected songs in all categories. When I right click on "Info" of these songs I have found that they are recognised as AAC audio files - but "Profile", "Channel" & "Encoded by" headings & information is absent. Songs are present on my hard drive & do not appear to be any different than other songs on the same albums added at the same time & which do play in iTunes !!
    My Library holds over 300 GB's of songs & I guess over 80% are affected .. Any help or suggestions to solve this major problem would be much appreciated ..

    iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
    By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
    You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
    With best regards,
    lyravega, goekhan.

  • ITunes sees the music but will not play anything

    First I would like to thank anyone who addresses this issue in advance! I have been trying to figure out the problem for some time and obviously have been unsuccessful. I also apologize if it is an easy fix and I was too dimwitted to figure it out on my own.
    I can open iTunes and see all of my music. I can see my playlists, purchased music and all of the music in my library. However, when I try and double-click or select play from the drop-down menu nothing happens. I even tried to purchase a new song and listen to it, but still nothing. I checked the deauthorize feature, but it is not set.
    Any advise, tips or replies are appreciated!
    Thanks

    you're not dimwitted. I wonder sometimes! lol
    just checking on something first. when you try to
    play a song in itunes, does that little
    diamond-shaped thingy stay firmly stuck to the left? Yes
    if so, next let's explicitly doublecheck your precise
    itunes version number. in itunes, go "help > about
    itunes" and wait for the version number to scroll up
    from the bottom of the screen. (for example, mine
    says "itunes 6.0.5.20") 6.0.5.2
    if you've got an itunes version 5.0.0.35, 5.0.1.4,
    6.0.0.18 or 6.0.1.3
    ... first let's check on this possibility:
    iTunes for Windows: Audio files do not play in
    iTunes 5 or 6
    if you've got an itunes version 6.0.2.23 or
    higher, or the compatibility settings thing wasn't a
    factor for you
    ... then first we'll try a careful standalone QT 7.1
    reinstall.
    download and save a copy of the QT 7.1 standalone
    installer to your hard drive. (we'll run the install
    from there rather than online.) switch off
    antivirus and antispyware applications prior to the
    install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes
    play audio properly again? Yes, this did the trick!
    (if you get an error message on the QT standalone
    reinstall, let us know what it says. include error
    message numbers if you're getting any.)
    b noir I thank you so very much for being willing to share your knowledge and lending a helping hand! I am indebted to you!

  • My  ipod after charging and disconnecting it stayed on the eject screen,...then it went to the apple screen and is clicking... it will not play

    I charged my Ipod 8gb yesterday and after disconnecting it was frozen onthe Ejecting screen... afterletting it run out of battery I now see the apple on the screen and it has a clicking noise that it hasnever had before

    Good Morning shann112577,
    Try the suggestions below if your iPhone will not turn on:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    http://support.apple.com/en-us/HT201412
    Regards,
    Judy

  • Movies will not play in latest iTunes update

    The subject sums it up.  Since updating to 10.7.0.21, my movies will no longer play and trying to do so causes iTunes to stop responding and consequently needing killed in Windows Task Manager.
    I have read similar threads that link to a process of disabling software processess in Quicktime, but I do not have Quicktime installed, nor have I in the past and the movies still played within iTunes.
    I have tried repairing iTunes and the result is the same.
    I have also tried unistalling and reinstalling iTunes and the movies still will not play.
    I have tried playing all of the movies in the library to ensure it was not an issue with a particular file and none will play.
    Any suggestions would be appreciated.
    Thanks,
    me

    I have the same issue.  I have Windows 7 64 with the latest iTunes version 10.7.0.27 up until the latest update all was good.  I now can't play any video from iTunes be it a pod cast, iPhone video or a movie.  As soon as you try playing the video, iTunes comes up with a message saying iTunes has stopped responding and will restart.
    I have tried the QuickTime fix of disabling Direct3D video acceleration and this doesn't work.  Have deinstalled QuickTime altogether and I still get the same issue.  Have deinstalled all Apple products from my PC as per the various online instructions and then done a full reinstall.  Still not working.
    Any other suggestions as not being able to play videos from iTunes is very annoying.  Either that or I hope Apple release a fix for this...

  • Some off my songs on iTunes will not play

    Some of my songs in iTunes are in grey and will not play for me

    The message means what it says. iTunes can't find the actual music files. You can confirm that by trying to play the songs in iTunes on the computer.
    - Try:
    iTunes: Finding lost media and downloads
    - Next reimport them

  • I movie will not play itunes purchased

    I am having a problem playing songs purchased on itunes on my videos. I keep getting computer not authorized to play....song. I go into itunes like it say's and authorize the computer to play songs purchsed from itunes. But it still will not play. Help anyone?

    That other discussion says to upgrade to QT 7.1.3 -- I'm having the same problem, songs from iTunes 7.0 won't play in iMovie 6.0.2 -- and I have already upgraded to QT 7.1.3.
    Not only do my purchased songs not work with iMovie, but songs that I ripped from CD do not work. No matter what I choose in iMovie (I'm trying to do a Magic iMovie) it says some of the songs I'm trying to use are not authorised.
    I don't know where the bug is, but I have all my apps upgraded and can't create a movie because of it.
    Any other hints?
    Jay Jennings

  • How can i send money through itunes to another apple id ?

    how can i send money through itunes to another apple id account? and how do i response when the itunes gifts doesn't work?

    http://support.apple.com/kb/HT2736
    If you are unable to successfully send a gift, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • HT1473 How do we import song from iTunes to any Apple device?

    How do we import song from iTunes to any Apple device?
    I do have the songs in my iTunes in the laptop but I dnt know how to import it into my iPhone.
    PLEASE HELP

    Nothing gets imported to iDevices.
    Read the Users Guide for the device, specifically the section on syncing content to the device.

  • My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    Note: @mac.com and @me.com Apple IDs can not be renamed.  If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
    From here  >  http://support.apple.com/kb/HT5622?viewlocale=en_US
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT1386 I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New song that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?

    Hey Etti101,
    I'd start off your troubleshooting process by deleting and redownloading the songs:
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    Delete the purchased song that is exhibiting the problem from your iTunes library.
    Click on the Purchased link in the iTunes Store to view your previously purchased music.
    Download your previously purchased song from this list.
    via: Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Regards,
    Delgadoh

Maybe you are looking for

  • SQL to SQL Append

    Hi, I have a interface to load data from tables to table into same Oracle server, the target table is truncate every time that run interface and the data is just insert (don't update), i read that can use "IKM SQL to SQL Append" to avoid extra loadin

  • Network connection good, explorer good, but no safari or mail

    First post and could really use some help. I have been using a belking pre N wireless router to connect to my comcast cable internet account. The network is set up using my PC and I have an airport express card in my Imac. Everything was working fine

  • I want to find a compatible version of foxfire to run on my MacOS9 system, is there one available?

    Basically I want a compatible brower for my older version of Mac)S (nine). Is it possible to download one from this website or where could I go to find one? Thanks

  • Tiger on PowerBook G4

    I would like to upgrade from Panther (10.3.9) to Tiger 10.4.x. My Computer is PowerBook G4. Questions are: 1. Do I need to upgrade RAM (current is 512) and other hardware before installation? 2. Would the softwares such as Adobe CS (Not CS2) and Macr

  • Import and export problems!

    I'm new to Aperture so bare with me please, I'm using the cannon Rebel XT, I noticed ( after an update I'm thinking) that when I wanted to import from the camera the frames were randomly placed, and when I click X to close and then click import again