How to link Crystal report to SBO layout print, like AR invoice?

Hi,
I am trying Crystal Report to work with SBO now; However, I dont know how to link Crystal Report to print AR invoice, sales order etc.; Is it possible to link Crystal with SBO document print layout?
Thank you!
Regards,
Jerry Huang

Hi jerry ,
It's nice that u found the answer, and thanks a lot for sharing the solution .
Please mark ur question as answered.
Rgds,
Premraj

Similar Messages

Crystal Reports 2011/ SBO 9 - Printing Layout on the Stickers Printer

Hi,
I Created The CR Layout for print Stickers.
I have Zebra Printer
The Layout's size are optimized to Sticker page size.
When I Click Print Preview on the Crystal Reports for SBO 2011 Application - I'm Able to print Successful Sticker.
When I Try Print The Layout from Sap Crystal Viewer (Print CR from SBO) - The Sticker gets out empty.
I have did it on 2 different Printers and have Received same Results.
Do you Have some solution?!
thanks,
Michael

Hi,
Please make sure printer settings and page setup in SBO are same.
Thanks & Regards,
Nagarajan

How to link crystal report with swing

I am developing applications in swing. I have done a report using crystal report.
Now i don't know how to link it with swing. can anyone help me to solve this with some examles.
thanx in advanz

Hope these links are useful:
http://www.must.de/default.html?Jareport.htm
http://www.utdallas.edu/~pxm034000/files/integrating.html

How to integrate crystal report(CR4E) with oracle JDeveloper 10

Hi All,
I was made crystal report in crystal report for eclipse in that i implemented .rpt & .JSP file it is working fine in CR4E
.I was Copied that file in JDeveloper 10 with its Library from JRC component while, running this page with passing parameter showing error in the page and without passing parmeter it is running it shows report
can any one please help me in this matter how to integarte crystal report in oracle JDeveloper 10 .or give me any Tutorial link that can help to solve these problem
ITS URGENT PLZ help me
Sinceraly,
Amol

It might help if you indicate what error you're seeing.
Note that the JRC isn't Eclipse specific - it's a 100% pure Java solution.
Sincerely,
Ted Ueda

How to export crystal report to excel through progeam

Hi,
Can any help me how to export crystal report to excel through program(C#). I'm using VS2005.
Also, the report should be in a pivot table format after exporting to the excel..please help me how to do this
Thanks,
Venky

Hi Venkat,
The link below provides the code C# in an ASP.NET codebehind file
http://www.codeproject.com/KB/cs/Crystal_Report_Export.aspx
http://aspalliance.com/478_Exporting_to_Excel_in_Crystal_Reports_NET__Perfect_Excel_Exports.2
Regards,
Abhijeet T.

How to design crystal report multi column

how to design crystal report multi column
for example
id    1001             id                 1002
    id            1003
name    dinesh          name            dk           name
dkn
address   kota             address       jaipur             address     delhi
pin    3260356        pin              546332        pin
675942
id    1004           id                 1005
   id            1006
name    dinesh1       name            dk1           name
dkn
address   kota1           address       jaipur1           address     delhi
pin    32606       pin            546345              pin
675942
and so on....................

DN
I am afraid you have come to the wrong place. MS does not support Crystal reports except for
"Microsoft supports setup and installation for the Crystal Reports products shipped with the Professional and Enterprise Editions of Microsoft Visual Basic for Windows versions 3.0, 4.0, 5.0 and 6.0."
For other support you need to contact
For other Crystal Reports support, please do not contact Microsoft. Please contact Crystal Decisions (formerly Seagate Software), which now owns and supports Crystal Report Writer.
http://support.microsoft.com/kb/100368
Wanikiya and Dyami--Team Zigzag

How to link the reports to portal

Hai Friends...
I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
Cheers
Gopi

hi gopi,
u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
bye..
naresh

How to invoke crystal reports from Oracle forms 11g R2 along with passing p

How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.

how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers

How to use crystal report in php

hello
i need help for how to use crystal report for view the database report spacilly crosstab report i need it very much to complete my project ill be very thank full for help
from farooq

Hello sir
i am sudeep and i need to deploy crstal reports in php
i want to integrate it in sugar crm (open source project(
can u plz tell me how to do it
i have written this code
<?php
//echo phpinfo();exit;
$ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
$crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
//$crapp = new COM("CrystalRuntime.Application.10");
$reportToRun="C:\Report4.rpt";
$creport = $crapp->OpenReport($reportToRun, 1);
//reportToRun=full path to *.rpt file
$creport->Database->Tables->
Item(1)->ConnectionProperties['User ID'] = $user;
$creport->Database->Tables->
Item(1)->ConnectionProperties['Password'] = $pass;
//fomatType = integer 22=xls, 31=pdf etc
$creport->ExportOptions->FormatType = $formatType;
//type 1 is to output to a file I think 2 is email
$creport->ExportOptions->DestinationType = 1;
//location = full path to report output file
$creport->ExportOptions->DiskFileName = $location;
$creport->DiscardSavedData();
$creport->Export(False);
?>
thanks in advance

How to Deploy crystal reports in BOE

Hi,
    I have two questions.
    1.How to deploy crystal reports in BOE server.
    2.How many ways is there to deploy crystal reports in BOE server and name of the method is needed.
   Anyone knows about these details could you please reply me
Regards
Babu N

I am not sure what you are asking.
Are you trying to publish reports into Enterprise so they can be run from say infoview, scheduled etc? If so you can either use the publishing wizard or do a save as from the Crystal Reports designer and save them to Enterprise directly.

How to do crystal reports in bi-7 i need clear steps

how to do crystal reports in bi-7 i need clear steps

Hi,
Please read the following documents.
I am sure that this is going to help you in creating crystal reports.
Regards,
Subha
Pls grant me points if it is found useful
Use
The Reporting Agent allows you to precalculate BEx queries (as useful queries) for Crystal reports in the background. This is a device used to improve system performance when executing Crystal reports.
Prerequisites
·        In the BEx Query Designer, you have defined a useful query for Crystal Reports and determined variables for the required characteristics.
·        You may want to apply a filter when precalculating this useful query using a control query (see Parameter Filtering in the section below). In this case, you need to have created an additional suitable query in the BEx Query Designer.
The associate variable must have the type Changeable with Query Navigation. Other variables can have any type.
Procedure
       1.      Choose the REPORTING_AGENT transaction code.
       2.      Select Precalculating Crystal Reports Queries and choose Execute.
       3.      Navigate to the required query in the left-hand Reporting Agent Settings tree.
       4.      You have the following options for creating a new setting:
-         Choose New Setting from the context menu.
-         Choose Create New Setting.
The New Reporting Agent Setting dialog box appears.
       5.      Enter a technical name and a description.
The following information is displayed on the General tab page:
-         The functional area of the setting is Precalculation of Crystal Reports Queries.
-         Information about the query for which you are creating a setting is shown under the Query group header (description, technical name, InfoProvider).
-         After the setting has been saved for the first time, the system displays details of the last person who changed the setting and the time this change was made, under the Last Changed On/By group header.
-         Under the Setting is Used in Packages group header, the system displays information about the packages in which the setting is used, and how they are scheduled. This information can only be displayed if you have defined the setting and assigned one or more scheduling packages to it.
       6.      Choose the Parameters tab page.
       7.      Determine whether precalculation of the Crystal Reports queries are to be parameterized using a filter and using variants.
For more information and recommendations for choosing parameters in a straightforward example, see Parameterizing Crystal Reports Queries Setting.
Filtering Parameters
No Filters
When you do not want to use a control query to precalculate variables, choose No Filter.
You can combine this option with parameterization using Variables (see below).
Explicitly Using Query Result
If you want to use a control query when filtering, choose Explicitly Using Query Result. You can now make entries in the Control Query and Variants fields.
Specify the technical name of the control query. Input help is available. After you save your entries, the system updates the information according to your selections.
You only need to specify a variant when the control query contains input-ready mandatory variables. This does not happen very often, however.
You can combine this option with parameterization using Variables (see below).
Parameter Variants
After making your setting for filtering a parameter, you can process variant for the individual characteristic values of the variables set in the useful query.
Note: The variable screen only offers such variables when they have not already been filled by the control query. (This can also include variables of type Changeable with Query Navigation, as long as they arent filled by the query).
You can choose from the following functions:
Create a Variant
A dialog box appears in which you can choose values for the SAP variables used in the useful query, in the Query Selection area. Input help is available for those InfoObjects for which SAP variables have been created.
Enter the required data.
Choose .
Change Variants
Delete Variants
If you have already created one or more variants, the system lists these in the lower part of the screen. Choose the variants you want to change or delete and choose the appropriate function.

How to use crystal report in J2EE Project.

how to use crystal report in J2EE Project.. any one know please inform me...
thank you..

http://www.inetsoftware.de/products/crystalclear/Crystal-Reports.htm?adwords=googleCrystal&gclid=CKDD1YDem5UCFRpknAodZA4EhA
I think this might help u...

How to use Crystal Reports XI release 2 Preview with Lotus Notes Scripts ?

 Hi all, How to use Crystal Reports XI release 2 Preview with Lotus Notes 7 Scripts ? Thank's 

Hi,
we are using Lotus Notes and Crystal Reports for preview and printing reports from our Lotus Notes Applications. We use the RDC object model. For previewing the reports we export them in an pdf-file and then start the PDF Reader to show the Preview. This works fine.
But with Crystal Reports > 11 the RDC Object Model is no longer supportet, so we look for another way to preview and print our reports.
I try to preview a report build with crystal report XI release 2 in my thick client (Lotus Notes) using java reporting component JRC, this report uses an native xml file as datasource. If the datasource is saved with the report everything works fine, but otherwise I have the following error:
JRCAgent1 detected an exception: javax.xml.namespace.QName: method getPrefix()Ljava/lang/String; not found
I also tried the .jars from Crystal4Eclipse. Doesn't work. When I use Eclipse to view the report everything works fine. The class QName exitsts in the jaxrpc.jar and in the xbean.jar, but only in the xbean.jar a Methode getPrefix exists.
This is what we tried:
Works fine with RDC. Doesn't work with JRC until now.
Did this help you ?
Perhaps you con help me with the JRC, because I'm a java newbee so any ideas could be helpful.
Oliver
<a href="http://www.cominform.de">www.cominform.de</a>

How to use Crystal Reports 11 with Visual C++ 2005 ?

Post Author: compvis
CA Forum: General
Hello everyone !
Plz tell me how to use Crystal Reports XI with Visual C++ 2005 ?
Thank you so much !

Moved to .NET SDK forum.
Need more info, version of the assemblies you are using and the assembly file system version number ( not the same as what you see in the properties of the project.
As well, what happens if you use OLE DB as a test?
Thank you
Don

How to use crystal reports in LabVIEW

Hi, Can anybody tell me how t use crystal reports in LabVIEW. If any material if you will be very helpful.
Regards,
Rajashekar

activeX

How to link Crystal report to SBO layout print, like AR invoice?

Similar Messages

Maybe you are looking for