How to link Palm M500 to Outlook 2003 using Windows Vista

Hi!  Not computer savvy so need some assistance on how to link Palm M500 to Outlook 2003 using Windows Vista.  Not sure if my Palm is too old to work with the others.  Any suggestions would be greatly appreciated!
Thank you!
Post relates to: Palm m500

http://kb.palm.com/wps/portal/kb/na/m-series/m500/unlocked/solutions/article/37014_en.html

Similar Messages

  • How do i access my photos in iCloud using Windows Vista?

    How do i access my photos in iCloud using Windows Vista?

    You can access your photos from photo stream on any of your devices.
    If you delete photos from the camera roll they aren't deleted from photo stream, if that's what you are asking.
    My webpage here might help you understand the various ways photos can be saved on your device and some of the advantages and disadvantages associated with each method.

  • Palm pro wont sync with outlook 2003 and windows device manager?

    Palm pro wont sync with outlook 2003 and windows device manager?  Files  e.g. word docs or excel files sync o.k. but i need my contacts and i only get a error that there is sporblem with my desktop computer.
    I am using vista  and i have all updates installed.
    Post relates to: Treo Pro T850U (Unlocked)

    Do you have windows mobile device center installed(WMDC)? If not download it from here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
    Be sure you download the correct version for your PC. If you have 32bit OS or 64bit OS. To find this out, right click on Computer under start and select properties. Near the middle it should say 32bit or 64bit. If you know you have the correct software. Open up the control panel and go to sync settings. Right click on the partnership you have setup and select delete. On your device go to Start-->Programs-->Activesync-->Menu-->Options tap on Windows PC and select Delete. Then once both are done resetup your partnership. But this time uncheck everything. Then once it is done syncing. Go to Mobile device settings and change content sync settings and select Contact. Click save and let it sync. Do the same for calendar, tasks, and notes but leave the last item checked. So when Contacts are done syncing you go and check Calendar and leave Contacts

  • Curios text in one of three computers when displaying the very same mail in Outlook. I run Outlook 2003 under Windows 8.1.1

    Curios text in one of three computers when displaying the very same mail in outlook.
    I run Outlook 2003 under Windows 8.1.1 in all of my 3 computers. 70% of the mail from the same sender are shown OK in the actual computer and 100% of the very same mail are shown OK in the two other computers. If I forwards an OK received
    mail from one of the “100%”, it will be received OK in the “70%” as well. For me the wrong displayed mail shows up as some kind of vector-descriptors (non converted html?). All links in blue are displayed ok and most of the text is readable in an unformatted
    way. When it comes to logos etc it’s not readable at all. What to do?
    Regards
    Björn Söron
    [email protected]

    Check these out, they fix most issues in Outlook
    https://support.microsoft.com/kb/2768648
    https://support.microsoft.com/kb/2652320
    DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

  • Duplicate calendars in Outlook 2010 after migration from Outlook 2003 using USMT 4.1

    Hi 
    We have setup where we migrate computers from Windows XP and Outlook 2003 to Windows 7 and Outlook 2010 using USMT 4.1 and task sequence and SCCM.
    We are currently experiencing that some users are having calendars in Outlook 2010 duplicated after the migration has been performed. The duplicated calendar cannot be deleted. The name of the calendar varies from case to case. 
    Has anyone experienced the same issues, and know how to resolve it?
    Best regards,
    M

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    If the calendar from personal folder .PST file follow these methods troubleshoot
    1.      
    Turn on or off Cached Exchange Mode, Click
    Here
    2.      
    Disable .PST file, and the re-add again.
    3.      
    Create a new profile
    4.      
    If the problem still did not resolve, you can refer to this KB article:
    “Outlook: Troubleshooting guide for missing, duplicated or unsynchronized calendar items”
     http://support.microsoft.com/kb/2222377
    If the calendar from Exchange Server, you can logon mailbox via OWA, if there has duplicated calendar, the problem might be caused by Exchange Server.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
    you, please feel free to let me know.
    Best regards
    William Zhou
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

    I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

    If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on.  The iCloud calendars will then download to your phone.

  • How do i sort out error r6034 on my windows vista when i try to start itunes, the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly,

    how do i sort out error r6034 on my windows vista when i try to start itunes ???
    the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.

    Hey deepakmenonfrompune,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Help Please..Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned). How do I transfer the library from the 160 to the 80gb in iTunes using Windows Vista (ie merge the 2 libraries)? Thanks

    Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
    How do I transfer the library from the 160gb  to the 80gb in iTunes using Windows Vista.
    Nothing seems to help on the Apple support pages, so any help would be appreciated
    Thanks

    Thanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
    Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
    Any help or pointers greatly appreciated
    Thanks

  • HT1386 I use Windows Vista.I moved my itunes library from the vista hard drive to data hard drive because of low memory remaining on vista. I can no longer sync my ipod to my library.how can this be fixed. Willy

    I use windows vista. I moved my itunes library fromvista to data hard drive. Very little available memory on vista. I cannot sync my ipod to library anymore.
    how can I fix this problem. Willy.

    Go to Settings>Preferences>Advanced and make sure that the location of your media library is correct.

  • TS4463 I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.

    I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.  I tried running the repair utlity to repair the iCloud however I am still getting this error message.

    I tried rebooting.  It didn't change anything.

  • I am using windows vista on a pc.  how do i use photoshop elements to increase resolution to 1920 on longest side without getting distortion

    using windows vista how to use photoshop elements to increase resolution to 1920 on the longest side without distortion?

    When I have the photo onscreen, the only options presented to me under File are Delete, Rename, Make copy, Copy and Properties.  It does not give Save as an option.  Not sure how to save for web.  When I go to Properties, it will not let me change the values at all.  I have tried free downloads for image resizing, but so far I have only found where they would allow me to enter lower pixel values, but not increase them.  For example, one image is now 960 pi/in X 640 pi/in.  I need to double the 960 to be 1920, and so I assume I need to also double the 640 to 1280.  But I have not found how to do that.  I am very inexperienced in any type of photoshopping, so I'm not terribly surprised to be running into problems, or even understanding what the problems are that I'm having.  Any other advice?

  • How to check ink levels of a 4620 using windows 8.1

    How to check ink levels of a 4620 using windows 8.1

    Hi krmoss,
    Welcome to the HP Support forums.  I see that you would like to learn how to check the ink levels on your Officejet 4620 printer.  
    The steps on how to check the estimated ink levels can be found in your User Guide on page 74 in the section titled “To check the estimated ink levels from the printer control panel”.   If you have installed the full feature software and driver for your printer onto your computer you can open up the HP Solution Center and check the from there as well.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • When I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP

    when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
    == This happened ==
    Every time Firefox opened
    == start mozila firefox

    This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
    The file dwmapi.dll is a Vista file and should not be present in Windows XP.
    See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674]

  • How do I change authorization in adobe digital editions using windows vista

    How do I change authorization in adobe digital editions using windows vista?
    When I try ctrl alt delete, I get the blue windows log in sceen.  How do I get past the log in screen to use the ctrl alt delete to change authorization for the adobe digital editions screen.

    Adobe apps can be reset to their factory defaults by using Ctrl+Alt+Shift, not Del. The rest doesn't really make any sense since you did not provide any details and authorizations can't be changed that way, anyway. If you want to transfer books to other devices you need to contact the vendors to release the DRM/ provide a new download and if you want to change the registered ID, you need to contact support or create a completely new account, which in turn will require you to buy your DRM managed books again/ get a new download as well.
    Mylenium

  • How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    How do you increase font size in Bridge using windows 7 and a 4k monitor?  It appears as though this issue has come up previously but there is no answer.

    Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
    Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
    Sorry, but for the time being, that's about it.
    Best,
    Gary

Maybe you are looking for