How to Link Solution manager with ECC?

Hi Friends,
i am new to solution manager. can any one help me how to link solution manager with other SAP servers like ECC, CRM, SRM? if anybody has paterial for the configuration can u send me, i will be very much thankful for that? my mail id is [email protected], [email protected]
thank you,
devendran.

hi Nick thanx for you reply. i was trying your way and the pop-up  asking the System name, Product, Product version and the installation number. (is it the right screen which i am opening? if it is not then help me out).
my doubt is what to give in the system name. i had given ECC500 and it is not taking. is there any specific charater to enter i this field? if it is there then where we are maintaining it?
in the product field i entered SAP R/3 Enterprise and Product Version SAP R/3 Enterprise 47x200 from F4 option.
the next doubt is what is the Installation number and what to give in that.
Regards,
Devendran

Similar Messages

  • How to integrate Solution manager with ARIS for Netweaver

    Hi,
    I have a requirement. Its like i have to configure and maintain documentations in SAP Solution Manager and also in ARIS for Netweaver.
    Then i have to synchronize both of them .
    I would appreciate if any one could help me out in integrating both of them.
    I have steps on how to synchronize both of them but the integration part is missing.
    Appreciate all your help..
    Kripashankar.N

    Hi there,
    the integration is pretty easy, you simply:
    --> start aris
    --> go to the designer
    --> create a database
    --> login to the database
    --> go to view/options
    --> Open SAP-Options
    --> Edit server info
    --> then you can start synchronizing your project
    hope this helps
    cheers
    art
    Edited by: Arthur Elsner on May 8, 2008 11:03 AM

  • How to install both solution manager and ECC Development on same server

    Hi All,
    Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
    Pls let me know.
    Regards,
    Karthik

    Hi Karthik,
    I try to answer you message, my answer may not be sufficient for you.
    Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
    Verify sizing of both systems.
    SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
    Best regards,
    Ruediger Stoecker

  • How to install both solution manager and ECC Development

    Hi All,
    Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
    Pls let me know.
    Regards,
    Karthik

    Hi Karthik,
    I try to answer you message, my answer may not be sufficient for you.
    Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
    Verify sizing of both systems.
    SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
    Best regards,
    Ruediger Stoecker

  • How to relate solution composer with solution manager ?

    Hi Friends ,
    Is there a way to link Solution composer with Solution Manager ? If yes how do we do it ?
    Which are the scenarios in which the two will be used in conjuction with one another ?
    Thanks in advance for your replies !
    Regards,
    Ranjini.

    Hi,
    You can use Solution Compose with Solution Manager.
    [http://www.sap.com/solutions/businessmaps/composer/index.epx|http://www.sap.com/solutions/businessmaps/composer/index.epx]
    [http://www50.sap.com/solutionmaps/composer/|http://www50.sap.com/solutionmaps/composer/]
    Thx,
    Waseem

  • How to take Solution Manager Roles in ECC 6.0?

    If I want some PFCG Roles from Solution Manager to ECC 6.0 then what is the easiest way should I used CUA (and select Solution Manager) as a system or what? I will be very thankful who ever will show me the right way. thanks in Advance

    Hi
    You can do the same in 2 Ways.
    1) Make a list of all roles which are required and create TR for these and move it to ECC System.
    2) Form PFCG ,download all the roles in bulk and upload the same in ECC System
    Thanks & Regards,
    Sandeep Alapati

  • Is it a must to use Solution manager for ECC 6.0 upgrade

    Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

    Hi,
    I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4. 
    I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
    Any docs out there for this?
    Thanks!
    I figured it out... i had to add the R/3 Enterprise logical components to my system landscape.  After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
    Never mind!
    Edited by: Tom Janes on Sep 9, 2009 12:52 AM

  • How to make Solution Manager 7.0??

    Hi Experts,
    I am totally new to Solution Manager.I have installed it & when it I am checking
    System->status->component version--->Solution Manager 4.0
    ST Stack is - 15.
    How to make Solution Manager 7.0?Which Support pack level I need to apply to make it Solution Manager 7.0?
    For EWA,MOPZ Configuration what should be the minimum stack level of ST??

    Hello N.Das
    Solman 7.0 IS Solman 4.0 . I mean only the name has been changed so it goes with version of Netweaver; nothing more than that. So you have Solman 7.0. right now !
    concerning the minimum SP Level for functionalities EWA and MOPZ. There is no correct answer. In your current Level you already have both; but ( and that is especially the case for MOPZ) new features have been added since ST15.
    Current latest Solman version is EHP1 ST23.
    Depending on what functionalities you re interested in MOPZ you will be able to choose the minimum level required.
    If i were you I would go for the last one, especially because it contains new bug fixes and valuable enhancement for MOPZ
    On this link you can check what is in what version of Solman: https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089906&
    Regards,
    Khalil

  • How to integrate Solution Manager system to Enterprise Portal

    Hi all,
    HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

    Hi,
    First establish SSO between portal and solution manager.
    make the iview from com.sap.portal.epsolman.EPSolman
    check the link for help
    ep and solution manager support desk
    Thanks
    Santosh

  • How to link a form with MSC2N

    Hi,
    Somebody know how to link a form with MSC2N.
    I want to complete the characteristic in the classification and after I want to print them with MSC2N;
    Thanks a lot for your help.
    Best regards
    Kari

    I explain you my problem.
    I want to link a form with MSC2N in order to print all the characteristic, and  all the informations of the good issue.
    That's why I want to link a form with MSC2N.
    My customer ask me to ceate a form with these informations and I don't kow how to join the characteristics in MSC2N and the datas which come from MIGO.
    Somebody could help me?
    Thanks a lot
    Kari

  • How to Link AD user with Apps user

    Hi,
    We are in process of authenticating EBusiness suite users against their Active Directory credentials.
    We did the following:
    1. Import Apps users into OID
    2. Import AD users into OID
    We dont know how to link AD account with EBz account. Are we on right track?
    Please let me know if there is any document which explains the linking process.

    FYI
    I sucessfully authetnicated the AD user in OID against AD password using external auth.
    Do I really need to import ebusiness apps users into OID and then establish a link? Pls help me explain the process.

  • How to link Business Place with plant

    Dear Expert,
    We are getting Business Place wise FBL3N report for Vat Payable GL code.
    We have created Business Place under Extended Witholding Tax tab.
    We are generating tax invoice in different plant.
    But how to link Business Place with plant so that FBL3N report will show Business place.
    Regards,
    Alok

    You can't make an entry directly to production server.
    You have to make the changes in Dev server then transport it to production server.
    Try the follow path
    SPRO-IMG-Cross-Application Components-General Application Functions-Place of Business-Assign Business Places to Plants.

  • Can anyone let me know about solution manager with respect to BI

    Hi all,
    I have been working on bi for more than 3 years. I am new to solution manager. Can anyone pls guide me about the activities that a sap bi consultant should know.
    Can anyone pls send the docs, pdf, nor url pertaining to solution manager with BI.
    Thanks
    Pooja

    chhk this
    [http://www.solutionmanagerexpert.com/article.cfm?id=3509|http://www.solutionmanagerexpert.com/article.cfm?id=3509]
    [http://help.sap.com/saphelp_tm70/helpdata/en/43/f3f8f92f322ae6e10000000a422035/content.htm|http://help.sap.com/saphelp_tm70/helpdata/en/43/f3f8f92f322ae6e10000000a422035/content.htm]

  • How to link Partner function with EDI ?

    Hi all,
    While sending PO thourgh EDI i am getting some error message...Partner function is not assigned with EDI..this message is not coming with ALE.
    Can any body help me to "How to link Partner function with EDI "?
    Thanks in advance.
    ankush

    Hi Ankush,
    Perhaps unintentionally, you are not rewarding points for correct answers, instead of clicking on the radio button"AWARD POINTS", you are clicking  "SOLVED BY OWN".
    and no points are being given from your side.
    Please award points if you find the answers helpful.
    Now also you can award points first, unassign by clicking again and then assign to whomsoever you think deserves.
    Regards,
    Sachendra Singh

  • How to link Skype account with Office 365 account?

    Will someone please tell me How to link Skype account with Office 365 account? I've had world minutes for 2 months, and can't use them. All links on Skype and Office 365 have not worked or are not there. Please, please somebody help me.

    Don't waste your time brotha, you've been ripped off.

Maybe you are looking for

  • Intermittent disconnection from network

    There are several "communities' this might fit into, so please let me know if this question would be better suited to a different location. I recently replaced my late-2006 MBP and am planning on giving it a long retirement as a home server.  The goa

  • Text Variable(Customer Exit) displays variable name instead of its value.

    Hi Gurus, My requirement is to display the year(from variable) as the field name i.e Year end salary 2009. I was using the fields name as hardcoded values like 2009 but as per my requirement i need to display it from the variable. I tried using Text

  • Workflow from capture to publish

    I am just starting in the world of Wedding and Event Videography. I love the excitement and emotion of weddings and feel privileged to be able to provide a record of the day. And I don't mind the long hours either. I am having trouble though with my

  • Watch movies

    when I hook up to tv with the apple cables I get sound but no picture it says on the screen no signal what is wrong thanks all

  • OS 10.5.4

    Please explane to me how to uninstall a program I downloaded SCYPE and for the life of me cannot remove it from my computer??