How to link the manged serverscreated on two boxes  in clustering setup

          I have installed weblogic on two machines
          1)First one is running on solaris
          2)second one is running on HP
          After that i have created a managed server on the two machines
          Then i have started cluster configuration using the weblogic Admin console from
          HP box .created a cluster but when i click the servers tab i was able to see only
          the managed server that i have created on HP box,but it should display the managed
          server that i have created on sun box also .so that i can move both of these servers
          from available to chosen then clusteing is established between these two servers
          

          How to Make sure node manager is running on Sun box.
          How this can be achieved??-- administrator can remote start Managed Server mapped
          to Sun Machine.
          "pavans" <[email protected]> wrote:
          >Deepak,
          >
          >There is no way to see the managed server you have created on Sun box.
          >
          >Couple of things here...
          >
          > You dont need to create Managed Server on Sun Box here.
          > Create a machine (name of Sun machine) thru console running on HP.
          > create a managed server and map it to that machine (Sun).
          > Make sure node manager is running on Sun box. So that administrator
          >can
          >remote start Managed Server mapped to Sun Machine.
          >
          >Repeat the above process if you want to create a managed server to run
          >on HP
          >box.
          >
          >
          >"Deepak" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have installed weblogic on two machines
          >> 1)First one is running on solaris
          >> 2)second one is running on HP
          >> After that i have created a managed server on the two machines
          >> Then i have started cluster configuration using the weblogic Admin
          >console
          >from
          >> HP box .created a cluster but when i click the servers tab i was able
          >to
          >see only
          >> the managed server that i have created on HP box,but it should display
          >the
          >managed
          >> server that i have created on sun box also .so that i can move both
          >of
          >these servers
          >> from available to chosen then clusteing is established between these
          >two
          >servers
          >
          >
          

Similar Messages

  • Urgent ! Assigning (or Linking ) the same workbook into two different roles

    Hi Gurus,
    Coul you tell how to link the same workbook to two different roles.
    I am assigning the same workbook to two different roles, but in the second role the workbook is displaying with different structure than in the first role. I want the workbook should be displayed with same structure in both the roles.
    This is Urgernt.
    Thanks in advance.
    Best regards
    Hari

    Hello hari,
    Both the roles should diplay the same layout for a single workbook.
    please ensure that both the users(with these 2 roles) have similar (all the other)authorisations.
    it's possible that one of the users may have further restrictions in authorisations. check out for z-authorisation objects if any.
    hope it helps..
    thanks,
    (*Don't forget to Assign points on SDN)

  • Did you know how to link the text in two or more text boxes?

    Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
    Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

    It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
    If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

  • How to display the entire application in two different languages in apex

    Hi,
    How to display the entire application in two different languages in apex...
    For example i need to display each item in both English and Hindi..
    To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
    Anyhow how it ll be apex is it possible
    Regards,
    Pavan

    Hi pars,
    http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
    In this link also i struck in
    In page 10  of that document
    The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
    http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
    This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
    Thanks alot for ur suggestions.kindly provide more inputs..............

  • How to define the dynamic navigation between two component in web ui

    Hi All,
    I have a requirement to create a new assignment block in accounts overview screen .
    1.Created new view(Table view) in the BP_HEAD component.
    2.Created new button on the table view toolbar .
    3.If the user clicks the new button it should navigate to interaction log component(BT126H_CALL).
    Please hekp me step 3 how to do .
    I have checked planned activity assignment block in the account but is dynamic navigation.
    Please explain me how to define the dynamic navigation between two components.
    What is window delegate .
    Thanks,
    Venkyy

    Hi ,
    Kindly follow the link , this will be helpful for your issue :
    http://wiki.sdn.sap.com/wiki/display/CRM/CRM-NavigatingtoyourcustomBSP+component

  • How to link one scroll bar with two dynamic text boxes.

    How to link one scroll bar with two dynamic text boxes.
    If i move scroll bar in one text box,automatically text will
    be moved in another text box.But scroll bar is not visible.
    Can you please help me.
    Thanks in advance.

    See the following article:
    JavaScript - setFocus Method for tabbing to next form field
    And see if iOS can even handle the sample form.
    iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

  • How to link the reports to portal

    Hai Friends...
    I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
    Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
    Cheers
    Gopi

    hi gopi,
    u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
    bye..
    naresh

  • How to link the main site menu to an anchor on a subpage?

    How to link the main site menu (masterpage) to an anchor possition on a subpage? Is that possible. I would like the the contact menu to link to specific anchors  location contact FAQ hours. The way I do it now. I have to create seperate html pages, I would rather do it on one page. Thanks
    http://beta.tmj-sleep.ca/index.html

    Hello,
    To link a website Menu to anchors on any page in the website, you need to create a manual menu using the Menu Widget. You can change Menu to a manual Menu by clicking on the white arrow in Blue Circle which comes up at the top right of the Menu (Menu properties) and select the Menu type as Manual. Please have a look at the screenshot below :
    Now you can add change/add the text there and when you select the text/menu item then from the Hyperlink drpdown at the top in the toolbar, you can select the name of the anchor on any page of your website.
    Anchors are listed in Hyperlink dropdown in this format - Page Name:Anchor Name.
    Hope this helps.
    Regards,
    Sachin

  • How to find the structural difference between two tables

    Hi all,
    How to find the structural difference between two tables .
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
    PL/SQL Release 11.1.0.7.0 - Production
    CORE 11.1.0.7.0 Production
    TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
    NLSRTL Version 11.1.0.7.0 - Production
    Thanks,
    P Prakash

    you could try something similar to this, for each table pair that you want to compare:
    SELECT 'TABLE_A has these columns that are not in TABLE_B', DIFF.*
      FROM (
            SELECT  COLUMN_NAME, DATA_TYPE, DATA_LENGTH
              FROM all_tab_columns
             WHERE table_name = 'TABLE_A'
             MINUS
            SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
              FROM all_tab_columns
             WHERE table_name = 'TABLE_B'
          ) DIFF
    UNION
    SELECT 'TABLE_B has these columns that are not in TABLE_A', DIFF.*
      FROM (
            SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
              FROM all_tab_columns
             WHERE table_name = 'TABLE_B'
             MINUS
            SELECT COLUMN_NAME, DATA_TYPE, DATA_LENGTH
              FROM all_tab_columns
             WHERE table_name = 'TABLE_A'
          ) DIFF;that's assuming, column_name, data_type and data_length are all you want to compare on.

  • In PM or QM modules how to link the smartforms to standard transections.

    Hi ABAP gurus,
         i am facing the problem how to link the smartforms to Standard transections, like
         QGA3 in this T-code i am give the Inspection lot no only, then this Lot number go to the smartforms
        it will pick the total data relavent to lot no, my problem is how to link between the T-Code to smartforms, 
    thanks.
    raj.

    hi,
    you have to configure in NACE. first identify the application type in NACE.
    thanks,
    anupama.

  • Adobe forms: How to reduce the spacing dynamically between two variables

    Hi All,
    I have a requirement where at the header I am printing the address and below that other contact detials of vendor. I have used standard address element of adobe forms and printing it on the form using a variable.
    When my addres contains 3 lines only in that case other contact details which are below address varible should dynamically move up.
    BRADKEN RESOURCES P/L
    86 BYNG STREET
    ORANGE NSW 2800
    Tel 123456789
    How can reduce the above spacing bet two variable. Please help me in getting the solution for this issue.
    Many thanks in advance!
    Vikash

    Hi
    You can concatenate the 2 variable and display it on that field.
    data.Page1.<field>.rawValue = Concat(data.Page1.<field1>.rawValue , "\u000a" , data.Page1.<field2>.rawValue)
    Kind Regards
    Mukesh

  • How to calculate the phase difference between two square wave (acquired from two channel in one DAQ)

    Hello everyone ,
     I need a quickly help that as below :
    I am trying use PCI-6220 to acquired six signals from one rotation encoder (channel A, channel B,channel Z ,and their non-signals) .The encoder out signals will be square wave and 4000pulses per revolution. I set it rotation at 300rpm speed. I need show every square wave of six out channels in waveform and measure the A-B phase difference to check if the value is correct (designed value should be 90deg) .
    I have no idea how to measure or calculate the phase difference of two square wave base on synchronizate to acquire these two square wave from two channel on the PCI-6620....
    Anyone can give a idea how to calculate the phase difference with two square wave ?
    Thank a lot and Thanks again...
    Tim

    Tim,
    Here is a simple rising edge detector for one channel.
    Lynn
    Attachments:
    Rising edge.vi ‏15 KB

  • How to link the Business Partner with the SAP User ID.

    Hi,
    We are working on a scenario wherein the resources are created as Business Partners in R/3.
    now How to link the Business Partner with the SAP User ID.

    HI AP,
    Maintain the business partner in role Internet User - BUP005.
    Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
    You can now see the link in table HRP1001.
    Cheers,
    Rishu.

  • HT1349 how to link the songs that are in itunes to my account so i can to me sales

    how to link the songs that are in itunes to my account so i can to me sale

    You'll need to copy the content on your iPod back to your iTunes library first.  Once you have successfully done that you can safely erase and sync your iPod.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How to calculate the hour difference between two dates?

    hi all,
    how to calculate the hour difference between two dates?
    eg i trying this...
    ((TO_DATE(TO_CHAR(GRNi.reference_date_4,'hh24:mi'),'hh24:mi') -
    TO_DATE(TO_CHAR(NVL(GRNi.reference_date_3,SYSDATE),'hh24:mi'),'hh24:mi'))*24)*60 Act_Hr
    Reg.
    AAK

    Hi
    To break the diff between 2 dates into days, hours, minutes, sec -- you can use the following:
    select to_char( created, 'dd-mon-yyyy hh24:mi:ss' ),
    trunc( sysdate-created ) "Dy",
    trunc( mod( (sysdate-created)*24, 24 ) ) "Hr",
    trunc( mod( (sysdate-created)*24*60, 60 ) ) "Mi",
    trunc( mod( (sysdate-created)*24*60*60, 60 ) ) "Sec",
    to_char( sysdate, 'dd-mon-yyyy hh24:mi:ss' ),
    sysdate-created "Tdy",
    (sysdate-created)*24 "Thr",
    (sysdate-created)*24*60 "Tmi",
    (sysdate-created)*24*60*60 "Tsec"
    from all_users
    where rownum < 50
    HTH
    RangaReddy

Maybe you are looking for

  • Problem in DII client while using custome type

    Hi All, I am accessing a webservice using JAX-RPC DII cleint. Webserviuce is deployed on a websphere app server 6.0 In Webservice i have 1 complextype called Address. When i try to call the webservice and try to pass the complex type as parameter to

  • I'm unable to use the domain with a .uk domain suffix with 2012 essentials

    I'm trying to link a domain I wish to use in office 365 to the essentials server but I receive "The domain name is not valid"when going through the "link domain to Office365" wizard, I also receive the same error when running through the anywhere acc

  • BASIC authentication with J2EE 1.4

    I want to change the hello1 example so only the user "user_one" can access the greeting servlet. How do I add a user (user_one) to the realm? How can I control the title for the realm i the dialogbox which pops up? At this time the dialogbox does pop

  • Chapters in DVD not corresponding to correct marker

    Hi- Used FCEHD to create 55 minute movie with about 20 markers, 10 of which are chapter markers. Used iDVD5 to create a dvd. Preview is OK - correctly shows the menu & each of the chapters. Created disk image to burn to a dvd disk later. When I play

  • How do I auto play audio in iBooks2

    I'd like to be able to have audio (and video, for that matter) start to play as soon as someone goes to a page. Can't seem to find a way to do that. Am I overlooking the obvious or is there really no way to make that happen?