How to link the reports to portal

Hai Friends...
I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
Cheers
Gopi

hi gopi,
u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
bye..
naresh

Similar Messages

  • How to LInk Business Object with Portal

    HI,
    My exact requirement is that i want to trigger a event of BUS10001006 business object through Portal. In Portal i have an iview with a parameter and a Delete button. I enter the Material number and then press the delete button. On Trigger of delete button a BO event shoud trigger which in turn will trigger the Workflow.
    The Workflow part is done but we are not sure how to link the BO/event of BO with Portal so that it triggers workflow.
    Regards
    Naveen Gupta

    BOBJ integration into portal is in NO WAY similar to ESS business package deployment. For that matter, it is not a business package at all.
    BOBJ itself is a web based application that interfaces with BW to retrieve different types of reports. So for the integration with SAP Portal you would not need to deploy any content (Except a few par files) on the portal.
    Basically, for BOBJ integration you would have two options:
    1. Integration using the iview template or URL iviews
    2. KM Based integration
    This topic has been discussed many a times and there is lot of information out there on SDN.
    You can start with the following link:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x
    Please revert if you have any specific questions.
    Thanks,
    Shanti

  • How to generate the reports in BI and display in EP ?

    Hi All
       I am new to BI but i am working on EP
       Can any one help me how to generate the reports in BI and should be displayed
       in EP frontend?  So what and all settings and installations i need to do ?
       Any documents on this will be really helpful to me..........
    Adv...thanks and regards
    Kops

    Hi kops,
    Check the links below.What you need is there..
    How can i place a query developed in BEX to portal
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm

  • How to access the webservice in portal component

    hai
         how to access the webservice in portal component.
         anyone knows give the solution
    Rds
    Shanthakumar

    Hai
    Please check this link.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/connectivity&
    Regards

  • How to automate the reports ?

    Post Author: Rajasopa
    CA Forum: Desktop Intelligence Reporting
    Hi everybody ,
    I need to know how to schedule the reports automatically? I have alreadu build reports .please help me out .
    Raj
    CGI SYSTEMS INC.

    Post Author: Miss_Purple
    CA Forum: Desktop Intelligence Reporting
    Hi Raj,
    On our set-up to schedule reports you need access to the Central Management Console of BO - I don't know how you get this though, I was sent a link to it by my line manager.
    Once you are in the Central Management Console, you can browse the reports in your repository, and just click on the 'schedule' tab for each one and select the options you want.
    Hope that helps...
    Miss P.

  • How to link Crystal report to SBO layout print, like AR invoice?

    Hi,
    I am trying Crystal Report to work with SBO now; However, I dont know how to link Crystal Report to print AR invoice, sales order etc.; Is it possible to link Crystal with SBO document print layout?
    Thank you!
    Regards,
    Jerry Huang

    Hi jerry ,
    It's nice that u found the answer, and  thanks a lot for sharing the solution .
    Please mark ur question as answered.
    Rgds,
    Premraj

  • Did you know how to link the text in two or more text boxes?

    Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
    Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

    It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
    If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

  • How  to grow the report of customer's openitem with sales order

    How  to grow the report of customer's open item with sales order?
    Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
    Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order .  I want to  know if other company have use this idea. Or have other solution for my problem.

    Hi Yuzhou Yang ,
      Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
      As you are aware that while creating a sales order , no FI entry is generated.
      In my opinion you can get the required report through customization.
    Thanks
    D.K.Lakshmi narayana

  • How to find the report for the SAP query (Query exists in table AQLQCAT)

    Hello Experts,
    I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
    Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing  AQusergroupquery name*  in transaction SE38.
    But unfortunately the program does not exists for the given paramenter.
    Could you please let me know how to get the report name for the SAP Query.
    Secondly please suggest any other way of checking the tables used in the SAP Query.
    Also the table name from where i can download the SAP Queries.
    Thanks in advance.
    Regards,
    Rahul Sinha

    I suggest you a simple method.
    Execute the query. When the selection screen is showed,  go to menu and click to SYSTEM->STATUS.
    Check the program name and double click it to access the program code.
    Search for tables or functions into the source code in order to understand where data are taken.
    If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
    Best regards.

  • How to format the report with the aggregated value

    Hi,
    I have 2 characteristics and 3 KFs in the infocube.
    First field is Cost Center
    Second field is creation Date
    3rd field is KF1
    4th field is KF2
    5th field is KF3
    I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
    The date in the info cube is as follows.
    Cost Ceneter  Date( no Display)   KF1     KF2      KF3
    CC1           01/01/2006          100     150      200
    CC1           02/02/2006          75      100      95
    CC1           05/02/2006          125      95      125
    CC2           01/02/2006          75       25      85
    CC2           02/02/2006          85       65      10
    As the Date field is in query set to No display so the date appearing in the report is as follows
    CC1       100        150        200
              75         100        95
              125          95        125
    CC2       75           25        85
              85           65        10
    But I want the aggregated value at cost senter level i.e.
    CC1       300         245       420
    CC2       160         90         95
    I can not remove the Date frield from query as there is a formula variable defined on the date field.
    Please let me know how to bring the report to the required format.
    Bill
    Message was edited by:
            Bill Bryan

    If you are in new Bex, you can do it.
    You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
    Say you have
    CH1--CH2CH3--CKF1
    To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
    Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
    ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
    Message was edited by:
            Ajay Das

  • My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

    My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

    My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

  • How to Check the report is Finished while calling a report from Forms 6i

    Dear All,
    I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
    I need to copy the pdf to store it in another place once the report is generated.
    My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
    As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
    {code}
    PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
         repid REPORT_OBJECT;
         v_rep VARCHAR2(100);
         rep_status varchar2(20);
         lv_id varchar2(1000);
    BEGIN
    repid := find_report_object('AMTP_995.RDF');
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
         if rep_status = 'FINISHED' then
         message('Report Completed'); message('Report Completed');
         else
              message('Error when running report.');           message('Error when running report.');
         end if;
    END;
    {code}
    Any Help

    actually My code is this:
    declare
         ln_alert          number;
         pl_id               ParamList;
         lv_report_name varchar2(10000);
         lv_path  varchar2 (100) := 'C:\';
         lv_shared_path  varchar2(1000);
         lv_copy_file varchar2(10000);
      cursor cr_dir_path IS
      select v_dir_path
      from md_directory
      where v_dir_code ='SHR';
      lv_file_name varchar2(1000);
    BEGIN
      open cr_dir_path;
      fetch cr_dir_path into lv_shared_path;
      close cr_dir_path;
    lv_report_name :=  lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
      if ffn_check_fields  THEN
         pl_id := Get_Parameter_List('LAI');
             IF NOT Id_Null(pl_id) THEN
                 Destroy_Parameter_List( pl_id );
              END IF;             
              pl_id := Create_Parameter_List('LAI');
           if :fn_cntl.nb_report_name ='MMAT_REPORT'
                then
                     if :fn_cntl.nb_report_desc ='EXPORT'
                          then
                         Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
             Add_Parameter(pl_id, 'DESTYPE',  TEXT_PARAMETER,'File');
            Add_Parameter(pl_id, 'DESNAME',  TEXT_PARAMETER, lv_report_name);
            Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
            Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);   
            Add_Parameter(pl_id, 'p_ref_no',     TEXT_PARAMETER, :fn_cntl.nb_ref_no);
            Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
                     Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
          DECLARE     
               repid REPORT_OBJECT;     v_rep VARCHAR2(100);     rep_status varchar2(20);BEGIN
                         /* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
             repid := find_report_object('MMAT_REPORT');      v_rep := RUN_REPORT_OBJECT(repid);
                        rep_status := REPORT_OBJECT_STATUS(v_rep);          
          if rep_status = 'FINISHED' then
              message('Report Completed');          message('Report Completed');
             --copy_report_object_output(v_rep,'c:\local.pdf');
             -- host('netscape c:\tlocal.pdf');     
         else          message('Error when running report.');
                                          message('Error when running report.');     
         end if;
                 END;
         end if;
      end if;
           if :fn_cntl.nb_report_desc ='EXPORT'
                then
                  error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
                     lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
                     host(lv_copy_file,no_screen);
                  error_handler('Report Has been Generated Sucessfully.',3);
           end if;
        end if;
    END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot...

  • How to design the report?

    Hi,
    how to change the filling data in report by vertical way?
    for eg: i am creating a group (group by userId) and displaying user name and access rights info;
    User Name   Access Rights
    TestUser      Adminuser
    TempUser    NotanAdminuser
    but i want in this format
    UserName        TestUser   TempUser
    AccessRights Adminuser  NotAnAdminuser
    how to design the report?

    i haven't tried using cross tab.
    but my requirement is like...
    Modified User Name ........ TestUser     Thendral    till 'n' number of users
    Total NO of Patients..........10                    5
              Heart Failure...........5                      1
              Surgical..................1                      2
              Pneumonia             3                      1
              Chest Pain             1                       1
            till 15 rows
    How to achieve this using crosstab?

  • How to add the report

    how to add the report for jasper ,i am using jdeveloper tool  to create project but how to add the report for the that project please help me

    Make the broadcasting setting using BEx Broadcaster and schedule program RSRD_BROADCAST_STARTER in process chain for the required settings.
    Regards,
    Sree

  • How to set the report path in a model plugin

    I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible. 
    Thanks.
    Solved!
    Go to Solution.

    If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
    If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
    You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

Maybe you are looking for