How to link two video stills clips tracks 1 and 2 ?

Hi,
I have two matching stills, one is marked up with guidelines as to where I wish the pan window to go, this is on video track 2, on track 1 is the pure image less these guidance notes. I have turned off default scale to frame size and this imported montage 'still' is larger than my project size. I now hope to position the still with the guidance lines and area showing start of pan for frame 1 and have the underlying matching image on track1 take up the same position also.
I thus need to link both images so that moving the one moves the other. How do I do this ?
Currenly I can move the track2 image but track 1 image doesnt follow with it.
Once I have indicated using keyframes the path I want to follow, I shall turn off track 1 and have Premiere create a movie just with the good image showing.
How do I link the two image tracks together ?
I am otherwise following a tutorial at http://www.savevid.com/video/create-an-advanced-photo-montage-in-premiere-pro.html which does the montage pan though I have just one photo, on tracks 1 and 2.
Envirographics.

Hi,
I have followed this advice, the pan route is now perfect along with some tweaking of the bezier handles to make it go straight along the top from west to east..
However on the monitor it plays with comb like artefacts along edges , on the produced avi file from Export>Movie, one sees double, a balloon has two strings for example. Humans have a ghosted edge all around them. As the image stops moving at end of the pan I see the two ballon strings get closer and become one just as the pan ends. Its blurred, I also see tide marks in some places, back of a guys shirt, as if its in 256colour mode !Written using an authoring prog to dvd the TV playback is no better. Just nothing like the stills in the same  video from which a montage was made to use for this Ken Burns effect. Why is the pan a mess ? It was a bit jerky on the PC, I hoped TV viewing would see an improvement.
I have done a right-click on the image, Field Options and checked Flicker Removal as seen in a thread, made no difference.
I'd also Crop the vertical in PS to just what was needed for the Project's/Sequence's vertical Frame dimension.”…done that
Project is:- , custom size 1152 x 768 PAL square pixel into which I brought a montage 3754 x 1221 also square pixel. This yields crisp detail even when zoomed in on in photoshop. So why the jerky double image effect ?
I have read that Premiere is not as good as this as dedicated programs, another suggestion was do it in After Effects but I dont have that, and these other progs are $200 and I had expected more quality than this. Article at http://vimeo.com/3181326 didjnt get these problems.
What have I not done or overlooked ?
Envirographics

Similar Messages

  • Linking two video clips together

    I cannot find the way, how to link two video clips together so, that when moving one, the linked clip follows.
    Is there a way of doing that?
    The manual gives nothing with words: "linking video clips".
    Message was edited by: TRST

    You can't link video clips to each other. You can nest them. Put the two clips in a sequence the way you want them. Put the sequence with the two clips inside your master sequence. They will act as a single clip. That's the only way.

  • Using iMovie-does anyone knows how to put two videos side by side in the same screen/

    Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

    See iMovie Help here.
    http://help.apple.com/imovie/mac/10.0/#movb8c659f55

  • How to link two combo boxes? (urgent)

    Hello,
    I am wondering how to link two combo boxes in Acrobat Pro 9. Basically, I need to link a building with a list of rooms. There are 3 building choices in my first combo box. For the sake of example, Building A, Building B and Building C. When one of the buildings is selected, I want a 2nd combo box to display the rooms that are located in that building. So by selecting building A, you would then be able to choose a room from the list of available rooms in the second drop box. The buildings cannot share a list of rooms because they have the same room numbers. Is anyone able to help?
    - Travis

    You can also use ajax. When the first combo box element is selected, it will call the ajax function and that ajax function will bring the data from the database and place it in second combo box.

  • How to link two controls?

    Hi,
    I'm trying to link two controls together, a slider and a numeric, so that if I change the value of one control, the other will also show the new value.
    Does anyone knows how to do that? Is that even possible?
    Thank you for your help
    Solved!
    Go to Solution.

    altenbach wrote:
    Tim's answer is correct and appropriate. No code needed.
    That's different.  Usually Christian shows me yet another, more efficient way, to code something.  Well, I guess you can't get more efficient than no code.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

    How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo  and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no  effects is going thru?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How i can insert videos, export to pdf and then watch the video? i can't

    How i can insert videos, export to pdf and then watch the video? i can't. It is suposse that i have to configurate the option save but i don't know how... any help?

    Fron the Pages Help menu:
    Using Sound and Movies
    You can add audio—a music file, a playlist from your iTunes library, or any other sound file—to a Pages document. You can add video that plays within a page.
    Pages accepts any QuickTime or iTunes file type, including the following:
    MOV
    MP3
    MPEG-4
    AIFF
    AAC
    Also note that some media files are protected under copyright law. Some downloaded music may be played only on the computer where the download occurred. Make sure the computer you are using has permission to play all the media files included in your document.
    When you add media files to your document, make sure that they will be available if you transfer your document to another computer. When saving your document, make sure the option “Copy audio and movies into document” is selected in the Save window. (If you don’t see the option, click the button next to the Save field to display the entire Save window, and then click the Advanced Options disclosure triangle.)

  • Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Use markers on every beat.
    The edit the zoom/scale to the markers.
    Adobe Premiere Pro Help | Working with markers

  • How to see two video track & interchange them ?

    Hi there,
    I have some problem which is tedious.
    You see, I have used 2 different camcorder to film the same scene but each from different angle.
    I placed this video file on V1 and V2, one on top of each other. This way, of course, only V2 can be seen. So, whenever I want V1 to be seen, I adjust the Opacity of V2 down.
    But adjusting this Opacity is tiring. Is there a way where I can see the content of both the video at the same time & select whichever I want (or for easier switching )?
    Thanks

    Thanks Ian, this is one real handy effects to have ... but I have to budget left to get a FCP bcos I think if I buy the new 27" iMac at the end of this month, my wife would freak out !! Can I borrow that helmet of yours so that I can shield my head against the hammer ?
    Ian R. Brown wrote:
    I don't know whether this is a practical/sensible answer that you want to hear but FCP7 has an incredible Multiclip facility which enables you to sync up any number of tracks.
    These are displayed in the Viewer. In my example below I have got 4 video tracks and the selected one is outlined in green.
    When you start playing all 4 videos display just as 4 TV monitors would in a TV studio.
    Whenever you want to swop to a new track, you simply click on the video you want, that track becomes outlined in green and FCP automatically and instantly makes a a video with all your changes of camera/track.
    You don't have to do it on the fly. You can work through it more slowly to get frame-accurate edits.
    The only disadvantage is that FCS3 will cost nearly as much as a new iMac!

  • How to link two authorizations to an object.

    Hello,
    In the EWA report I received the following recommendation:
    "If you do not want to disable development in your system, you have to exclude OBJTYPE=DEBUG with ACTVT=02 from the profile and allow any other object type for S_DEVELOP. This means that development and debugging with visualization are still possible.
    You can do this by linking two authorizations to object S_DEVELOP: One with all object types (except "DEBUG") and all activities and another for object type DEBUG only with all activities (except 02)."
    How to achieve this?
    Thanks
    Galina

    > I try not to maintain transactions in SU24. 
    >...
    > We have a small user population. 
    I can understand that, however it still has a downside when your user base grows, or you move on and someone else needs to take over, or the functional consultants leave the building and when you upgrade or apply support packs and need to make some changes, then you don't know why the authorization was added manually - at least not without having to sieve through a sea of documentation and mails etc.
    It is easier to find a transport request and it's documentation IMO, and who knows about it, approved it, tested it, etc.
    It is just a little organizational discipline thing, but it does go a long way.
    Cheers,
    Julius

  • How to link Two existing Opportunity in CRM

    Hi experts,
                    How to make link between two existing Opportunity using CRM_ORDER_MAINTAIN doc_flow.
    If there is any other solution to link please let me know. And what are all value I will have to pass in FM that also please let me know.

    You can just create the links without using the CRM_ORDER_MAINTAIN. Use the function module BINARY_RELATION_CREATE.
    If you still want to use CRM_DOC_FLOW_MAINTAIN_OW,  you can get the data to be input to by studying the ET_DOCFLOW from an existing transaction (Opportunity) that has a valid link to another transaction (Opportunity). Use the report program CRM_ORDER_READ and explore the data sets. Once you know the contents of the DOCFLOW set, use the same values in your maintain module.

  • How to link two recording channels for stereo?

    I have a zoom 6 interface which naturally records vocals in stereo with audition with its built in stereo
    Mic. However, I have an external stereo mic which connects to two different inputs on my interface.
    I want to link these two inputs in audition to record in stereo without recording two separate busses.
    How can I do this?
    Thanks!

    You need to select a stereo input option in the channel sources choice on the track control panel (LHS). If it's possible to pair the two inputs, then this is where you do it.
    Alternatively, just don't bother! Simply record two mono tracks and mix them down to a stereo track afterwards. Mind you, if you are recording vocals like this, then there really isn't a lot of point, as your voice is mono anyway, and you only really need a single output from the mic - one side or the other would do. If you are recording ambient sound, then okay, stereo - but you really don't need that for a single voice.

  • How to play two videos at the same time

    Hi everyone!
    Ok, so what I'm trying to do is basically play two videos, which are already saved on the computer, at the same time. I can get one video to play, but when i try to start another it just displays a blank screen.
    import javax.swing.*;
    import javax.media.*;
    import java.awt.*;
    import javax.media.protocol.*;
    public class TwoVideoTest {
         public static void main(String[]args) {
         MediaLocator locator1 = null;
         MediaLocator locator2 = null;
         try {
         locator1 = new MediaLocator("file:/C:/truck1.mpg");
         locator2 = new MediaLocator("file:/C:/truck2.mpg");
         } catch(Exception e) {
         System.out.println("COULNDT CREATE LOCATORS IN MAIN TEST CLASS");
                          System.exit(-1);
         Player player1 = null;
         Player player2 = null;
                     try {
          player1 = Manager.createRealizedPlayer(locator1);
         player2 = Manager.createRealizedPlayer(locator2);
                      } catch(Exception e) {
              System.exit(0);
         JFrame frame = new JFrame();
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel panel1 = new JPanel();
       JPanel panel2 = new JPanel();
        panel1.add(player1.getVisualComponent());
       frame.getContentPane().add(panel1);
       frame.setSize(new Dimension(500,500));     
       frame.setVisible(true);
       player1.start();
       player2.start();
    }

    HELLO AGAIN! I guess i post too soon....
    So i modified my code and now the videos play together. Threads, sigh.
    But the audio that comes with the video doesn't appear to be starting at the same time. And this problem I ASSURE you i have no clue how to handle. And yes i know, the two video audios will overlap, but this a test for heavens sake!
    Anyways, heres the modified code in case it will help anyone
    import javax.swing.*;
    import javax.media.*;
    import java.awt.*;
    import javax.media.protocol.*;
    public class Video implements Runnable{
         String url;
         MediaLocator locator;
         Player player;
         JPanel panel;
         public Video (String url,JPanel panel) {
              this.url = url;
              try {
                   locator = new MediaLocator(url);
                   player = Manager.createRealizedPlayer(locator);     
                   panel.add(player.getVisualComponent());
                   player.start();
              } catch (Exception e) {
                   System.out.println("ERROR CREATING MEDIALOCATOR");
                   System.exit(-1);
         public void run() {
              try {
              Thread.sleep(100);
              } catch(Exception e) {}
         public static void main(String[]args) {
            JFrame frame = new JFrame();
              frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              JPanel panel1 = new JPanel();
              JPanel panel2 = new JPanel();
              panel1.setPreferredSize(new Dimension(100,100));
              panel2.setPreferredSize(new Dimension(100,100));
              Thread thread1 = new Thread(new Video("file:/C:/truck1.mpg",panel1));
              Thread thread2 = new Thread(new Video("file:/C:/truck2.mpg",panel2));
              frame.getContentPane().add(panel1);
              frame.getContentPane().add(panel2);
              frame.setSize(new Dimension(500,500));     
              frame.setVisible(true);
              thread1.start();
              thread2.start();
         

  • How to link two header files so that it may be taken from the library ONLY

    Hi.
    I was able to compile and successfully execute a program earlier
    written in Oracle 7 (Solaris) Now in Oracle 10G (Linux). The only
    problem is that I have to include two header files
    sqlca.h and sqlda.h in the present working directory.How to enter them in the linking command so that I do not need to
    copy them everytime in the current working direcotry ?
    I have used the following commands :
    $ proc sample.pc
    $ cc -L$ORACLE_HOME/lib -L/usr/lib -lclntsh -o sample sample.c
    regds.
    J.S.S

    Use always -I option of the compiler to include all header file directories U wich to add. In this case no need to copy the files.

  • How to view two video files synchronously?

    i have some questions about video/audio merging !
    first, i have two video chips a and b ,how can i merge them into only one file,and when i view it ,the two video chips will paly together, a is on the left,and b is on the right.
    second, i have two audio chips about telephoning. c is the record of one terminal,and d is the other record of terminal .i want to conbine c and d as only one file ,so,when i play it ,i will hear a full conversation.
    trird, how can i merge the video and audio files ,and then play it together.

    These are back-ups for the IFO files, which are used for play and control functions for the DVD.
    http://filext.com/file-extension/BUP
    You really need the VOB files to view or edit the DVD video.

Maybe you are looking for