How to link Value Helps in Visual Composer?

I would like to know, how to link value helps in VC...??? It's like.....after selecting a value from Value Help 1, how do i restrict my Value Help 2 values so that it contains the values that are relevant to the value selected from Value Help 1 only....???? Request you to please provide the solution.......

Hi Christophe
Thanks so much for your help. I have been trying to do the way that you have suggested but am unsuccessfull...... Can you please tell me as to where should I create a field in the second popup view...??? After I double click on the link between "Start" and the "BAPI" in the second popup view...... , I find no "+" symbol in the "Configure Element Panel" using which I can add the value taken from the first popup view.....
Is there any pdf file or documentation that shows as to how to do this process...????
Waiting for your response..... Thanks for your suggestion.....
Regards
Deepak Jaju

Similar Messages

How to work with BI using Visual Composer....?

Hi
I want to work with BI report and BEx analyzer etc using Visual Composer.
I am using Visual Composer 7.1. I have configured BI system connection using the following link
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm.
In the above document i didnt understand the following para....
Creating BI Users in the Portal
Ensure that the BI back-end users also exist in the J2EE Engine. You can use the BI back end as the user store for the J2EE Engine or you can create the users manually. If you create the users manually, you should ensure that they have the same names as in the BI back-end; this avoids the need to configure user assignment.
How to check BI back end user also exist in J2EE engine ?
How to use BI kit in Visual composer. From where can i download BI kit for Visual Composer.
What is the difference between developing application in VC using the above method and using BI kit.
Please help me....
Regards
Sowmya....

Hi,
Without the BI kit you cannot do a lot of things in VC 7.1.
This kit is not available with 7.1.
The part that you did not understand meant that if you opening VC using a certain id in portal for eg "user" then the same id should be present in your backend system in this case BW system.
Without this it wont be able to connect to the system.
Hope this helps
Regards
Nikhil.
Reward points if you find the answer helpful

How to create i view in visual composer give details screenshots

how to create i view in visual composer give details screenshots

Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939

How to change front color in Visual composer

Dear friend,
i am taking numerical expression box into visual composer table view
and try to change the front color in style tab for that field property
but front color is not changing in output(back ground color is changing ).
how to change front color in visual composer?
and can we change the symbol color too?
thanks and regards,
dushyant.

Hi Vani!
1. Unfortunately one of my requirements is that I can only get data from queries and not from Web Services or other sources, so no WS calling would be allowed in my deployed I-View, but thanks anyway for your suggestion.
2. You are right, I was not clear enough in my first post. Let's say I have 3 rows and 12 columns, what I want is the following:
ROW3 = ROW1 / ROW2
obviously for each column. Do you have an idea about how it could be done??
Thanks a lot,
Andrea

How to use Google Maps by Visual Composer?

Hi all,
I'm creating some simple applications by Visual Composer in which I wanna use a Google Maps in VC,
and i have now successfully got to the STREET, POSTL_CODE, CITY and COUNTRY came from the BAPI.
(i am trying to use the Bapi_Customer_Getdetail2.)
but,i didn't get how to connect Table View and Html View.
I have already checked the below links. but i fail to understand how to do it.
Re: Google Map and VC
Help on google maps
https://wiki.sdn.sap.com/wiki/display/VC/Using%2bGoogle%2bMaps
I have many unknowns, could you tell me how to use Google Maps by VC.
(* About Our VC viersion : SAP NetWeaver Visual Composer EHP1 SP2 for SAP NetWeaver 7.1)

Some thread are say that create the URL fields. like the below messages.
The STREET, POSTL_CODE, CITY and COUNTRY come from your BAPI. The other variables url* are default values to create the URL that is requiered for walweb.
URL1 'http://walweb.nl/walweb/picsfromspace/maps.php?LanguageRadio=dutch&AddressInput='
URL2 '&ZipcodeInput='
URL3 '&StateInput=&CitycodeInput=&CityInput='
URL4 '&CountrySelect='
URL5 '&ZoomSelect=17&PoiInput=hidden&PoiButton=Interessante+Punten'
Where should I create those fields? at the Table Vies?
and also i dont get where should i set the below. is that setting at the [[Map Data]]-[[Assigned Value]]??
STORE@Url1 & @STREET & STORE@Url2 & @POSTL_CODE & STORE@Url3 & @CITY & STORE@Url4 & @COUNTRY & STORE@Url5
best regards,
Masahiro Minagawa

How to connect two iviews in Visual Composer 2004s?

Hi,
I am trying a sample application (Bank Details) in Visual Composer(Netweaver 2004s) but getting a warning as "Event EVT1 is declared but cannot be raised". Actually I want to show the GetList values in the first iview & GetDetil values in the second iview. I have done everything for the two iviews, but not able to connect the two iviews.I tried to drag from Signal Out of the first iview to Signal In of the second iview, but not able to connect them.
Hope someone can suggest a solution.
Regards
Shemim

Hi
Sorry for the mistake.
Please refer this:-
Re: How can I transfer data form one data store to another iview /dats store
Re: Popup communicating with multiple iviews (layers)
Regards
Navneet
null
Message was edited by:
Navneet Giria

How export data in Excel From Visual Composer

Hay everybody,
I would like to export my data result from Visual Composer to Excel. I've tried with an export data buton, but the exported file has a very bad format in Excel. I've tried an hyperlink buton which contain the Reptname data of the query too, but I can't keep my filters. This second solution can be nice for the format. If anyone knows how I can keep my filters, I would be fine.
Thanks

I did not get solution by using BW 3.5 , can we export data to Excel ? I am refering
[HOW TO EXPORT DATA FROM VISUAL COMPOSER|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123?overridelayout=true] following link??

How to working with BI in Visual Composer 7.1

Hi.
I want to work with BeX Query using Visual Composer 7.1
I created BI system in EP System configuration.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/081ed5f8685875e10000000a11466f/frameset.htm
But I can only see Web service destination and RFC destination. What shall I do to solve it?
And Why /nwa -> destination is only see in VC?
Help me^^

Hi Kang Min Shim ,
In order to search for BI destinations in VC you must have the BI Kit for VC installed on your machine.
If you have that BI Kit installed you need to [define a BI destination|http://help.sap.com/saphelp_nwce10/helpdata/en/45/c21540edc547f5e10000000a114a6b/content.htm].
I hope it helps,
Udi

How to call a BAPI from Visual Composer

hi,
I am new to Visual composer. can some body give me step by step information of calling a bapi or RFC from VC.
Thanks in advance,
Gopi

Hi Gopi,
Steps involed for calling RFC/BAPI from VC
1. Choose Model->Select Data Services.
(Alternatively, click the Data button in the task panel toolbar.)
2. In the Portal field at the right end of the main toolbar, enter the URL of the portal from
which you can access the back-end system used by the iView.
For example, you could enter: http://<yourportal>:50000/..
3. Click the traffic light icon to the right of the Portal field. The portal Welcome screen
appears.
4. Log on to the portal as a user that exists in the connected back-end system, or which is
mapped to a user of that system. Click OK.
Once a connection to the portal is established, a list of system aliases defined in the
portal system landscape appears in the System drop-down
list.
From the System drop-down list, choose the SAP system that contains the function module.
6. Under Search SAP System, click the Search tab and in the Name field, enter the search string: <RFC/BAPI name>. Then click Search (at the bottom).
5. A list of function modules matching the search string is displayed.
7. Drag the function module/bapi from the Data task panel into the
workspace: The data service is added to your model.
8. Periodically save your work. To do so, choose File->Save Model.
Finally test the iview in VC.
In the workspace, drag your mouse from the Input port of the data service, <inputform> and dragn your mouse from the outut port from the data service <tabelview and etc..>
or
Go through the this documentation...
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
Thanks,
Suriya.

How to create value help in web-dynpro-abap

Hi ,
can anybody tell me detailed step for creating value help in web-dynpro-abap .

Hi,
Web Dynpro provides two types of pre-implemented search helps :
1. ABAP Dictionary Search help
2. OVS
Input Help for WDA
http://help.sap.com/saphelp_nw04s/helpdata/en/b3/4d3642eca5033be10000000a1550b0/frameset.htm
There is a blog on implementing OVS help in WDA. You can refer below link for sample code.
/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
In addition, you can also provide help through Drop Downs and Select options.
Working with Select options in WDA
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e
Plz reward if helpful.
Thanks.
Raj.

How to implement Value Help for Product ID?

Hi,
I have a Z-Component where I want to use the value help of the Product ID. I found several components which use this value help for Products but I can't get it to work in my component properly.
Does anybody have a short tutorial how I need to proceed?
Thanks in advance.

There is a search component that can be used for this purpose.
This is one function out of several. I don't have the complete implementation at hand but this will give you the first idea.
CALL METHOD cl_crm_uiu_prod_tools_search=>eh_onclosepopup_return_product
   EXPORTING
      ir_search_popup = search_popup
   CHANGING
      cr_context_node = lv_target_node
      cv_index        = gv_tableindex.

How import data in Excel into Visual Composer

Is there a realistic way to import data into visual composer? I could not find a data service that was Remote enabled to do this?
Does anyone have any ideas

Currently no solution available to import data from excel to visual composer.
Regards
Basheer

How to identify active layer in Visual Composer 7.0

Hi Experts,
I am using a model with several layers and a link tree navigation control.
Is there a way to find out on which of the layers the user currently is?
For example: If the user opens Tab 3 can I then get the information tab = 3?
I need this for guard conditions and for a button to open a hyperlink where the url depends on the layer.
Sincerely
Markus

Hi Markus
Instead of using the Navigation Control "Link Tree" I would set Navigation Control to "None" and model your own navigation with a form view containing buttons to navigate between layers. You can then use a Data Store with a field called "Tab" and default value Tab1. When you trigger the event to navigate to other tabs update the Data Store field Tab with the target tab value. You can then base guard conditions etc. on the Tab value in the Data Store.
Hope this helps
Adam

How get link value of content selector

Hi everybody
I have a content selector and I display the content like this:
<pz:contentSelector rule="selecContenido" id="nodes"/>
<utility:notNull item="${nodes}">
<ul>
<utility:forEachInArray array="${nodes}" id="node" type="com.bea.content.Node">
<li><cm:getProperty id="node" name="title"/></li>
<li><cm:getProperty id="node" name="cellphone"/></li>
</utility:forEachInArray>
</ul>
</utility:notNull>
the "cellphone" property is a link to another content, then when I see the result of JSP, I get something like that:
*this is the title
*/BEA Repository/6005
How can I get the values of "cellphone" content?
THANKS

Sorry Ryan, I'm not very sure if I understand well, but I don't know how can I get the id and use it to get link content values.
<utility:forEachInArray array="${nodes}" id="node" type="com.bea.content.Node">
<cm:getProperty id="node" name="title"/>
HERE IS THE PROBLEM ( I need use <cm:getProperty id="node" name="cellphone"/>)
<utility:forEachInArray array="${nodes}" id="node" type="com.bea.content.Node">
<cm:getProperty id="node" name="cellphone_name"/>
</utility:forEachInArray>
</utility:forEachInArray>
thanks

How to link ACTIONS/help to a a newly created button?

I have created a button to open up a pop up window and display the same information as if you click on ACTIONS and then HELP on an interactive eport/form however I end up with a blank pop up screen
I have the following under Action When Button Clicked
action = redirect to URL
validation = YES
URL =
javascript:popupURL('wwv_flow_utilities.show_ir_help?p_app_id=101&p_worksheet_id=3&p_lang=en');
any ideas??
thanks in advance for the assist.

why not make your button click fetch the IR Help menu link on-the-fly and use that
Change your buttons URL redirect action to
javascript:window.location.href = $('#apexir_ACTIONSMENU a.dhtmlSubMenuN[title="Help"]').attr('href');Or even the following would do
javascript:popupURL('wwv_flow_utilities.show_ir_help?p_app_id='+$v('pFlowId') + '&p_worksheet_id='+$('div#apexir_DATA_PANEL table.apexir_WORKSHEET_DATA').attr('id'))These also has the advantage that there is no application or worksheet_id hardcoding in the URL.

How to link Value Helps in Visual Composer?

Similar Messages

Maybe you are looking for