How to listen for actionContent button click event in View

Hello,
Doing this:
FlexGlobals.topLevelApplication.addEventListener('actionContentClick',showOptions);
Results in calling showOptions() as many times as the view was showed. The handler sticks and each time I enter a view in the creationComplete hander for it I add the same listener over and over again.
How should this be done?
1. FlexGlobals.topLevelApplication is the right object to listen to?
2. I can remove the listener on view deactivate, but I am not sure if that will be called each time the view goes away.
3. Can I check if an object already has a listener and which is it?
Thank you.

Thank you, Tom.
I was complicating things for myself by exposing methods in the main MXML file to add and remove and listen to click events on a button placed in the actionContent, instead of declaring it in MXML for each and adding a listener to it. Views had different actionContent buttons or rather icons for them.
In regards to hasEvenListener, can I also get the method(s) attached to that? Probably not though.

Similar Messages

How do you fire a button click event on apex page from fancybox iframe that was created by page

I am trying to fire off the button click event from fancybox iframe. The apex page has a button that launches a fancybox iframe which is loaded with an APEX form. On close of that fancy box, I am trying to fire a click event on the parent page which will refresh a div with html that is created with plsql. The button on the page works as expected when clicked from the page. It will show a debug alert message to prove it was called and then load the div with the correct data. I am unable to fire off this button click from the fancybox iframe when it closes.
A couple of points:
I using Plug-in: Execute PL/SQL Code and Return Content ("PLUGIN_MULEDEV.SERVER_REGION_REFRESH") to place the create fancybox statement. It is used to populate a div using plsql.
The name of the button on the main page is P2020_REFRESH_SECTION_BUILDER_BTN.
The click dynamic action on the button is calling the plugin to replace the html in the div.
The data in the form in the fancybox is being saved to the database. On close of the fancybox box I want to refresh the div so the new record is included in the div html.
Can anyone help. Here is the fancybox code:
function customProcessOnReadyState4(){
 for (var i=0;i<11;i++){
 $( "#tabs"+i ).tabs();
 $("#createNewExerciseLink"+i).fancybox({
 ''width'' : ''60%'',
 ''height'' : ''70%'',
 ''autoScale'' : true,
 ''transitionIn'' : 200,
 ''transitionOut'' : 200,
 ''type'' : ''iframe'',
 ''onClosed'' : function() {
 window.parent.$(''#P2020_REFRESH_SECTION_BUILDER_BTN'').click();
Here are the dynamic actions assigned to the button:
5 - Execute JavaScript Code
alert("Starting refresh");
10 - Execute PL/SQL Code and Return Content [Plug-in]
begin
SCTUI.create_sct_tabs2(:P2020_CREATE_SECTION_LOV, '1');
end;

user setActionListener...
<af:setActionListener from="#{bindings.XXX.inputValue" to="#{backingbean.variable}"
 <af:inputText value="#{bindings.Email.inputValue}"
 label="#{bindings.Email.hints.label}"
 binding="#{backingBeanScope.backing_ShuttlePage.it2}"
 id="it2">
 <f:validator binding="#{bindings.Email.validator}"/>
 </af:inputText>
 <af:commandButton text="commandButton 2"
 binding="#{backingBeanScope.backing_ShuttlePage.cb2}"
 id="cb2" action="passing">
 <af:setActionListener from="#{bindings.Email.inputValue}"
 to="#{processScope.detail}"/>
 </af:commandButton>next jsf page:
 <af:outputText value="#{processScope.detail}"
 binding="#{backingBeanScope.backing_ProcessScope.ot1}"
 id="ot1"/>setPropertyListener also should work
<af:setPropertyListener from="#{bindings.Email.inputValue}" to="#{processScope.detail}" type="action"/>

How to generate barcode on button click event in PDF using adobe livecycle?

I already created form in PDF file which is validate completely .But , I required generate a barcode of all field of form using custom script on button click event.
Please give me right way for doing it .
Thanks in Advance,
Jaydeep Solanki.

Hi vijay,
What project are you doing？ Is it Asp.Net project? If so, you'll need to post it in the dedicated ASP.Net Forum
http://forums.asp.net for more efficient responses, where you can contact ASP.NET experts.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I catch the button click event from toolbar for my JSP?

I am using JDev 3.2 and BC4J for my JSP. I am using data web bean methods to create my JSPs. I need to implement a
master-detail relation in my JSP. Currently I put my master browser as the top frame of JSTabContainer bean and put my
6 detailed tables into 6 tabs. I found that when I click the next or previous button of toolbar of master frame, the detail tab
does not display the corresponding detail data properly. I think the reason is that I did not refresh the tab content when
the user change the current record of master table. Now my question is that how do I catch those events so that I can
refresh the content of my detail table? Or whatever suggestion can make this work.
Thanks,
Lisa

You posted here with Firefox 17.0.1.
Try running a Norton Live Update so Norton can update their Firefox add-on and get that Toolbar working again.
That said, Norton doesn't do anything about Malware. You need a Malware application to locate and remove Malware.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://windows.microsoft.com/en-US/windows7/products/features/windows-defender] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

How to add add the code for the MouseEvent.CLICK event

Could anyone help me who is a beginner please?
I'd like to know step by step how to do the following
instruction.
I am trying to add a link to my flash.
I drew a shape on the stage, select it and transform it to
movie clip (hit F8 or right-click on it and select "Convert to
symbol" from the popup menu or use the main menu: Modify ->
Convert to symbol). I resized it as the same size as my stage, then
make it transparent.
Then I am supposed to do the following in order to create a
link.
"add the code for the MouseEvent.CLICK event that would open
a url using the navigateToURL() function."
But I just don't know how to. Could anyone tell me step by
step approach please?
Thanks in advance.

Yes, click the frame where you have the button on stage and
open the actions panel. paste the script in, and make sure whatever
instance name you gave the button, you plug into the script. Also,
the function declaration should be like so:
function callFunction(e:MouseEvent):void{ <-- 'e' can be
anything you want, it could be 'kfjeiwajfkd' for that
matter.

HOW TO CALL APPROVAL WORK FLOW ON BUTTON CLICK EVENT OF VISUAL WEB PART?

Hiall,
I created an OOB an approval work flow I want to start that approval work flow through visual web part button click event
In work flow Settings I selected to manually start .Is this possible ? if possible please guide me how to do this
Thanking you,
Arun kumar

Hi,
If you have an instance of SPListItem, and know the workflow association name, you can start it. First you need to find workflow assocation instance and tell SPSite.SPWorkflowManager to start your workflow.
See this for more information:
http://blog.mmasood.com/2012/06/programatically-start-workflow.html
Please remember to up-vote or mark the reply as answer if you find it helpful.

How to call elem. Search help on Button click event in WD appilcation

Hello All,
i have requirement to call elem. search help on button click event in WD application. currently i am calling FM F4IF_START_VALUE_REQUEST but getting the short dump as below,
The following error text was processed in the system X31 : Screen output without connection to user.
The error occurred on the application server saps_X31_31 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSDH4
Function: F4_PRESEL_WITH_TABSTRIP of program SAPLSDH4
Form: F4PROZ_STEP_PRESEL of program SAPLSDSD
Function: DD_SHLP_SINGLE_STEP of program SAPLSDSD
Form: F4PROZ_LOOP of program SAPLSDSD
Form: F4PROZ of program SAPLSDSD
Function: F4IF_START_VALUE_REQUEST of program SAPLSDHI
Method: ONACTIONSEARCH_CUSTOMER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
is there any way to achieve the required behaviour.
please let me know.
Regards,
Chandra

Hi Friends,
I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
The search help is working fine and i am getting the entries with the following code.
The problem is i am finding extra popup on screen.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname         = space
fieldname       = space
SEARCHHELP      = 'MAT1'
MULTIPLE_CHOICE = 'X'
STEPL           = 0
value           = 'MATNR'
*dynpprog        = progname
*dynpnr          = dynnum
*dynprofield     = 'CARRIER'
CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
CALLBACK_FORM             = 'F4CALLBACK'
TABLES
RETURN_TAB                = RETURN_TAB
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5.

I am writting a test using a sequencer to test for multiple button click

I'm using flex sdk 4.1 and have a situation where a button click is sometimes called twice. I am writting a test for this using a sequencer and it will run for at least one button click, what I am not sure is how to test for multiple click events(which shouldn't happen, but occours randomly in my project)
package tests.view
    import flash.events.MouseEvent;
    import flexunit.framework.Assert;
    import mx.events.FlexEvent;
    import org.flexunit.async.Async;
    import org.fluint.sequence.SequenceEventDispatcher;
    import org.fluint.sequence.SequenceRunner;
    import org.fluint.sequence.SequenceWaiter;
    import org.fluint.uiImpersonation.UIImpersonator;
    import views.AddComments;
    public class TestAddComments
        private var view:AddComments;
        [Before(async,ui)]
        public function setUp() : void
            view = new AddComments;
            Async.proceedOnEvent( this, view, FlexEvent.CREATION_COMPLETE, 600 );
            UIImpersonator.addChild( view );
        [Test]
        public function testButtonClick():void
            view.addCommentBtn
            var sequence:SequenceRunner = new SequenceRunner( this );
            sequence.addStep( new SequenceEventDispatcher( view.addCommentBtn, new MouseEvent( 'click', true, false ) ) );
            sequence.addStep( new SequenceWaiter( view.addCommentBtn, MouseEvent.CLICK, 100 ) );
            sequence.run();

The only way you could test for that type of circumstance... one where something may happen... is to do so with a timeout. In other words, you cannot let the test pass simply because the first event occurred.
Two ways to handle this... with sequences:
Instead, you write a test that expects 2 clicks. In the assertion handler (which would only be reached if both clicks occur) you would fail the test:
fail('i shouldnt be here');
In the Waiter for the 2nd click, you would specify a timeout handler. That timeout handler will get called in the 2nd click does not occur in the specified time... (finding that time is the hard part). The default timeout handler fails the test, however, in your case, your timeout handler would just happily do any assertions needed and move on. A timeout does not necessarily mean failure... in your case, it is correct
Second choice:
You could create a timer. Create an event handler for the button click which increments a counter. Start the timer, do your test. However, have your test pending on the timer's completion rather than something like the click.. In that case, you would then be able to just check the count:
private var clickCount:int = 0;
[Test]
public function testButtonClick():void {
     var timer:Timer = new Timer( 100, 1 );
    Async.handleEvent( this, timer, TimerEvent.COMPLETE, checkClickCount );
     view.addCommentBtn.addEventListener( 'click', function( e:Event ):void { clickCount++ } );
     view.addCommentBtn.dispatchEvent( new MouseEvent( 'click;, true, false ) );
private function checkClickCount( e:Event ):void {
assertEquals( 1, clickCount );
However, I can't imagine how the test you are describing could ever yield more than one click event... I am guessing the problem is elsewhere, but this will help you verify
Mike

FileDialog.SAVE: trap the "Save" button click event

Hello All
Can anyone help me with FileDialog.SAVE, as to how we could trap the Save button click event? Is it possible to actually trap that particular event, rather than just checking for FileDialog.getFile() == null -> which indicates that "Cancel" button was selected.
Any help would be highly appreciated
Regards
Naushin

You can not do this, because FileDialog uses native dialog and all
buttons on it are native (there are no java-components for them).
Thus checking FileDialof.getFile() for null is only way to figure out
whether user choose some file or not.

Sharepoint 2010 Custom Visual Webpart button click event firing on page refresh

I have developed a Visual Webpart to create a list in SP using vs2010 and the button click event I have written the list create method. If I click the button list is created successfully. And I refresh the page again list is creating(Again button
click event is triggering).please help me to solve the issue.
protected void Button1_Click(object sender,
EventArgs e)
            SPWeb web
= SPContext.Current.Web;
            //SPList list=web.Lists["Auto"];
            SPList list
= web.Lists[DropDownList2.SelectedItem.Text];
            if
(string.IsNullOrEmpty(TextBox1.Text)
|| string.IsNullOrEmpty(DropDownList1.Text))
Label4.Text =
"Fields Are Empty";
            else
if (DropDownList1.SelectedItem.Text
== "Single line of Text")
                list.Fields.Add(TextBox1.Text,
SPFieldType.Text,
true);
SPView viewname = list.Views["All Items"];
                viewname.ViewFields.Add(TextBox1.Text);
//viewname.Update();
                list.Update();
Label4.Text =
"Field Created Successfully";
TextBox1.Text =
string.Empty;
// Label4.Text = string.Empty;

Hi,
This is because the request is sent to the server when you refresh the page.
A workaround for this is that we can “provide a refresh link that redirects to the same page (or if you have some action causing the refresh programmatically, you could just
redirect to the page after that, with Response.Redirect)
so that page is requested by the browser (with GET method, default with hyperlinks)”.
More information:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/45648b39-1229-405c-ac9e-60eb82905982/click-event-getting-fired-on-page-refresh
Or we can use the Session to save a value which used as a flag for us to check whether it is a page refresh and perform accordingly.
http://www.codeproject.com/Articles/28099/Refresh-Page-Issue-in-ASP-Net
http://www.codeproject.com/Articles/10240/Detecting-Page-Refresh
Thanks
Patrick Liang
TechNet Community Support

Capturing navigation button click event

Hi,
Is it possible to capture the navigation button click events on a system form?For example when the goods receipt form is open and i click on navigation button on the tool bar.
Can help with some sample codes?
Thanks.
Satish.

Hi,
Here you´ve got an example from the UI API help file.
Private Sub SBO_Application_MenuEvent(pVal As SAPbouiCOM.IMenuEvent, BubbleEvent As Boolean)
    If pVal.MenuUID = "1288" Or _
        pVal.MenuUID = "1289" Or _
        pVal.MenuUID = "1290" Or _
        pVal.MenuUID = "1291" Then
      If pVal.BeforeAction = False Then
          Select Case pVal.MenuUID
            '// Under the If clause, check each item if it was clicked
            Case "1288"
                oRecordSet.MoveNext
                '// If reached EOF show last
                If oRecordSet.EOF = True Then
                    oRecordSet.MoveLast
                End If
            Case ...
            End Select
        End If
    End If
End Sub
To know the current form, you can use the ActiveForm property.
Regards,
Ibai Peñ

Methods for adding DBL click event in ALV

Methods for adding DBL click event in ALV

Hi Jagrut,
If you are using CL_GUI_ALV_GRID class to display ALV report and want to add
double clicking functionality to ALV need to handle event DOUBLE_CLICK
in your local class.
See the below code how you define it.
*===============================================================
* LOCAL CLASSES: Definition
*===============================================================
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
* § 2. Define a method for each print event you need.
    METHODS:
    TOP_OF_PAGE FOR EVENT TOP_OF_PAGE
                         OF CL_GUI_ALV_GRID
                         IMPORTING E_DYNDOC_ID,
    DOUBLE_CLICK FOR EVENT DOUBLE_CLICK
                         OF CL_GUI_ALV_GRID
                         importing E_ROW.
PRIVATE SECTION.
ENDCLASS.                    "lcl_event_receiver DEFINITION
*===============================================================
* LOCAL CLASSES: Implementation
*===============================================================
* class c_event_receiver (Implementation)
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
* Top-of-page event
    PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD.                            "top_of_page
METHOD DOUBLE_CLICK.
* Top-of-page event
    PERFORM list using e_row.
ENDMETHOD.                            "DOUBLE_CLICK
You also need to register the events.
And also check the program BCALV_GRID_VERIFY.
Hope this will help you.
Thanks&Regards,
Siri.

Wait for a button click

Hi,
Here's the problem :
my main class calls :
LoginContext loginContext = new LoginContext("Main",
new DialogCallbackHandler());
I've made a DialogCallbackHandler class which opens a JFrame with 2 fields (TextField & PasswordField) and a button "ok".
But the LoginContext wants immediately an answer (the login & the password). How can I make the loginContext waiting for the button click.
I tried with a
while(!buttonClicked);
but it's not a good solution.
I also tried with a Thread inside this loop while and sleeps (during a 500 ms). But I think there's a better solution...
Can I make a wait, and a notify for this or not.
Thank you for your help.
Yann
-- http://www.objectweb.org/jonas

Why don't you use the JOptionPane class.
I think it provides all that you need.
For example use the method :
     String pass = "azedvge";
     JPasswordField passwordField = new JPasswordField(20);
     int result = JOptionPane.showConfirmDialog(parentComponent, password, "Password check", JOptionPane.OK_CANCEL_OPTION, JOptionPane.PLAIN_MESSAGE);
     if (result == JOptionPane.OK_OPTION) {
          String p = new String(passwordField.getPassword());
          if (p.equals(pass)) {
               // OK !
          else {
               System.exit(0);
     else {
          System.exit(0);
I hope this helps,
Denis

Error with No Message on Button Click Event

Hi,
I am getting a framework error on button click event.
I have a page in which shuttle component is there,on click of the commit button the page traversed to main jsp page there i am getting error like ERROR and only '-'.
In application module java file i have written the code for the shuttle component which creates the new row and set the values.

Hi Frank. Thanks for the answer. Kindly check the code for shuttle component below. This is written in the Application Module (..ServicesImpl.java)
public void multipleShuttle(List productIds,String reqRefNumber,Date orderDate,String hoSectionCd)
System.out.println("Its entering into the test method");
System.out.println("Inside updateSkillsForCurrentStaff method");
System.out.println("reqRefNumber:"+reqRefNumber);
System.out.println("orderDate:"+orderDate);
System.out.println("hoSectionCd:"+hoSectionCd);
if (productIds != null && productIds.size() > 0)
List<Number> copyOfProductIds = (List<Number>)Utils.cloneList(productIds);
//List copyOfProductIdsNames=Utils.cloneList(productIds);
System.out.println("list values "+copyOfProductIds);;
//System.out.println("list values "+copyOfProductIdsNames);;
ViewObject skills = getMsMsOrderHdrUO2();
RowSetIterator rsi = skills.createRowSetIterator(null);
// remove any rows for the current user that aren't in the list of product keys
while (rsi.hasNext())
Row r = rsi.next();
Number productId = (Number)r.getAttribute("MsDepotCd");
System.out.println("depot from row setter "+productId);
// if the existing row is in the list, we're ok, so remove from list.
if (copyOfProductIds.contains(productId))
copyOfProductIds.remove(productId);
// if the existing row is in not list, remove it.
else {
r.remove();
rsi.closeRowSetIterator();
// at this point, we need to add new rows for the keys that are left
for (Number productIdToAdd: copyOfProductIds)
Row newRow = skills.createRow();
skills.insertRow(newRow);
try
System.out.println("productIdToAdd"+productIdToAdd);
System.out.println("inside attributes setter try method");
//AS PER THE NEW REQUIREMENT ORDER STAUTS WIL BE 'DRAFT' AND ON APPROVAL BY JGM THEN IT WILL BE 'APPROVED'
newRow.setAttribute("OrderStatus","DRAFT");
System.out.println("Depot Code set is"+newRow.getAttribute("DepotCd"));
if(productIdToAdd.equals("0"))
System.out.println("inside the HO method to set section");
newRow.setAttribute("HoSections",hoSectionCd);
System.out.println("After setting the values");
catch(Exception e)
System.out.println("Exception Caught"+e);
getDBTransaction().commit();
orderDetailInsertProcedure(reqRefNumber);
}

How write Vbscript for Mouse Right Click using UFT 11.5

how write Vbscript for Mouse Right Click using UFT 11.5

Press and hold the Control (Ctrl) key while you click the mouse button. This is identical to right-clicking with a mouse. (Ctrl+click = Right click)
You can try the following:
•Click on and off the 'right click' checkbox in the Mouse System Preferences
•Restart in Safe Mode
•Reset NVRAM / PRAM

How to listen for actionContent button click event in View

Similar Messages

Maybe you are looking for