How to listen to wave files in e-mail

i get lots of e-mail where i need to see a wmv file and do not get a choice of opening the attachments. is there a software that i need to download in order to view these attachments ? Thanks

hello,
the blackberry message client is able to read only some types of attachment. Including JPG, PDF, XLS, PPT and some others. But not CSV or WAV.
the official list is on the Blackberry site, but not many details about media files.
blackberry support center >> How to download and save an email message attachment in its native file...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

How to play a wave file through the DAQ board?

Hi there,
we want to play a wave file that is saved on the harddrive via the DAQ board. Means we want to connect a amp to the analog output of the DAQ to amplify the sound and play it through a speaker.
We couldn't find any VI that does that. Can anybody tell us how to play a wave file, or perhaps even send us a VI that can do that?
Thanks a lot for your help
Martin - Physical Optics Corporation

Hi Martin,
The only example that I could find on how to do this was using our
older Traditional DAQ drivers version 6.9.3. If you're using Traditional
DAQ drivers, the vi can be found here.
The example reads a 8-bit mono .wav file (an example .wav file is included in the .zip file) and writes it to the analog out of your DAQ card. I've updated the
example to work with our newer DAQmx drivers and attached it here.
I hope this helps,
Paul C.
Message Edited by Paul C. on 08-14-2007 05:47 PM
Attachments:
daqmx_wav_file_to_ao_output.zip ‏27 KB

How do I get WAV files to play in Outlook Web app?

I have a player that will play WAV files, but when I select and hold the .wav file in a mail message, the option to "Open In.." doesn't show up and the file won't play. I'm using an iPad 2 with the latest iOS and latest Safari. When I try to play the attached file, the iPad brings up a black screen with the play button in the middle with the international NO sign ( circle with diagonal line) through it.

I tried the Microsoft TechNet support for help but their site is completely incompatible with Safari on an iPad. You can get a Windows Live ID and navigate to the forums page on TechNet but all of the forum links pull up blank white pages on the iPad. The whole experience on the MS support site is horrible on an iPad. You'd think with over 60 million iPads out there they'd do a little testing on an iPad.
So I'm looking for help from my fellow Mac/iPad users

Can any one tell me how to attach a pdf file to the mail through workflow

I have a smart which i am able to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

Hi,
To create the task for attachment
Use the BOR SELFITEM and method NOTES_APPEND.
The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
But the TYPE : OBJ.
Similarly using NOTE_DISPLAY method u can display the documents u like.
In any work item u have the facility to attach any atttchment for further circulation .
Attchment @ WORKITEM
1.Click the workitem for which you want to create the attchment
2.Press create attachment
3. Add the attachment u like (PDF)
Reward points for useful answer.
Richard A

How do I attach a file to a Mail doc without the file being opened in the Mail document?

How do I attach a file to a Mail doc without the file being opened in the Mail document?

You will (often) see a preview of the attachment, depending upon the file type. To get rid of the preview: control click on the attachment select "View as icon".
(What the recipient of your message sees is dictated by that person's email application. If you want to make sure the person gets an attachement which is not previewed, you can zip it (control-click, "Compress...") and then attach the zipped file(s). Or you can try something like Attachment Tamer.)

HT2500 how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise.

how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise. thank you.

Attach it to the message. An attachment is an attachment -- if it is displayed or not by the recipient's e-mail client is not under your control.
You can zip it (compress it) before sending it; if it's text, you should zip it anyway; if it's JPEG, zipping will not reduce the size (in fact, it's even possible it may increase it slightly), but most e-mail clients do not display what's inside a zip archive.

How to Load a wav file into a JFrame

Ok, I have a JFrame with a JPanel and JButtons, play, pause, stop....etc...I have a menu with items load song and exit. Now when you click file load song, it pops up a JFileChooser.....that all works fine. Now I want to be able to select a wav file from that file chooser and have it load into the JFrame, displaying the name of the song in the JPanel...as a JLabel or whatever. Also how can I make the buttons, play pause stop, etc. work with the song. I.E. when i press play, the song plays, stop the song stops...any ideas?

Create a JLabel with the filename as its text. Add the JLabel onto your JPanel. Add the JPanel
onto the JFrame. Call setVisible(true) on the JFrame. For Java GUI basics, study:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
For wav file playing:
String filename = "foo.wav";
java.applet.AudioClip clip
= java.applet.Applet.newAudioClip(new File(filename).toURI().toURL());
clip.play();

How to open a "wav" file in Logic 7.2.1 and then remaster?

A fellow musician wants to see if I can improve audio tracks his band recorded in Cubase SX. He has a CD with the WAV files of each of 12 audio tracks. First question - Could someone tell me how to open his files and then import them into Logic Pro so that his tracks 1-12 correspond to my audio tracks 1-12 and be in sync?
Second question - assuming I can get his tracks going what are the key ways to boost volume or "master" his tracks so that the end result, a stereo mix, is loud vibrant and "radio ready"?
I'm familiar with the mastering plug ins on the output channels of Logic. I've used "Soft Maximizer" but it seems to be compression related. Are these "rooms", available on the output channels, the only way to increase volume and aliveness?
He's doing this because the studio he's at can't seem to make a mix that he's happy with. He says the mixes lack volume and vibrancy. Thanks in advance.

Use the Audio Editor window to import the tracks. Then drag them one at a time onto Audio tracks in the Arrange window so they all align to Bar 1 1 1 1.
The fun will start if they were not recorded simultaneously as you will need to align them manually to be in sync. Good luck with that it takes time but is not impossible. Use the moveable start point in the Audio Editor to adjust the start of each wav file until they are aligned.
To improve the levels, probably the quickest way is to Normalize each track first in the Audio Editor window before you start mixing and EQ'ing them in Arrange.
Rik

How do I compress Wav files

Hi, I have some sound files that I want to be able to email to people, but I can't because the files are too big. Is there a way to compress these files(wav)?

You may refer to the following there method to compress WAV files
Method 1: Compress WAV to other audio format
Compress WAV to lossless compression audio format without losing audio quality like compress WAV to FLAC, compress WAV to Apple Lossless ALAC M4A
Compress WAV to lossy audio format like compress WAV to MP3, compress WAV to WMA, AAC, RA and etc.
Method 2: Lower WAV bit rate
With this method, we can easily reduce WAV file size without changing WAV audio format.
The lower the bit rate, the smaller the WAV file size, the lower quality of the WAV audio.
In most cases, WAV audio quality shows little difference between 128kbps and higher bitrates. WAV quality will become crappier if the bit rate is less than 128kbps.
Method 3: Compress WAV to other audio format as well as lower bit rate
The third way to compress a WAV file size is that we simultaneously apply Method 1 as well as Method 2.
Resources: How to Compress WAV File Size without Losing Quality on Windows or Mac?

How to import a .wav file for adding to a clip in imovie 09

I want to know how can we import a .wav file in Imovie 09.
The sound is in some location on my 2nd hard disc.
I checked this page
http://www.dummies.com/how-to/content/how-to-import-audio-into-imovie-09-project s.navId-323836.html
but this does not help my requirement.
I have a video in which there was a lot of hiss recorded via camera I exported the audio and using some audio filtering softwares cleaned the sound and now I want to import this clean sound back to my imoive project.
It is a .wav file which is clean and without hiss.

I see.By the time I saw your msg I had done the same and opened Itunes to play.
There was an option in Imovie to import Itunes playlist or file and was able to do so.
Any one will guess as in File some import menu
should exist for this.In this case it was not that.
mp3 clip needs to be played in Itunes
where Itunes will make it a part of the mp3 library it has.
Then Imovie 09 has a way to import the shared playlist from itunes.

How to create a wav file from 24bit 96Khz sampling rate data

Hi
I am trying to make an VI which will play sound while acquiring data from PXI 4472 DAQ card.
My sampling rate is 96Khz and PXI 4472 card is a 24bit card.
Wave files are in 8 or 16 bit and the sampling rate is 8000, 11025, 22050 and 44100. How will I be able to play the data which I am acquiring.
How would i normalize the data into the required format needed for most of the sound cards to play.
Or are there any codec available in Windows XP which i call to play a 96KHz 24 bit sample
Does anybody ever encountered this type of problem.
Thanks in advance
Nitin

Whilst the 'standard' RIFF format specification usually accomodates 16 bit data, there is of course no reason that you can not create your own extension. It just won't be playable by Media player using the 'standard' installed drivers or codec. This may not be a problem....
WAV files can and do support other formats, you just need to know how to handle them......
There is howerver a 4GB limit (related to the pointer size in the WAV specification) which with higher bit depths on the sampling does start to become a bit of a problem.
To give you a few samples of other types of wav files check out the following site here
http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/Samples.html
The following definitions for WAV audio formats may also be of interest here
http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html
Good luck with 24 bits.

HT3819 How do I convert WAV files in iTunes Library to MP3?

I have a SwiMP3 device that plays music through headphones while I swim. It only accepts MP3 files and many of the files in my iTunes library are WAV files. How do I convert these to MP3? Thanks, David T

In your iTunes, set Edit/Preferences/Import Settings to MP3. Then highlight the song you want to convert and click on Advanced/Create MP3 version. A second version of the song will now appear in your Library.

How to create a .wav file in visual basic?

I'm having the audio sample data(scaled data) in an array created by the CWAI_AcquiredData event. How do i convert this to a .wav file so that i can play back the audio data i acquired.
Can any one help me out ????????

Hello
You should probably check out the MSDN for examples on how to do this.
I think the Speech 5.1 SDK probably has some function that would help you out.
Hope this help
Bilal Durrani
NI
Bilal Durrani
NI

HT3823 may I known, my itunes song is ACC file how to convert to WAV file

may I known, my itunes song is ACC file how to convert to WAV file

Here's a free online file converter I use all the time: http://www.convertfiles.com/
And don't you mean AAC, not ACC? lol

How do you import .WAV files into Presonus studio one pro on a Mac Mini

I am new to this type of forum and I don't know how to ask a good question but here goes. I have a Mac Mini and I am getting very frustrated with my presonus DAW software. I was able to import .WAV files int o my PC Real easy but I don't seem to be able to find out how to do it with my Mac Mini. I clicked on import files and the files would magically transfer themselves into my DAW on my PC, but with the mac it doesn't want to do it the same way. I E-mailed the software company but they told me to do lit just like I have been importing with my PC but it doesn't work. Any help would be greatly appreciated. I might also mention that this is my first Mac and I am not too familiar with the operating system yet, and besides all that I am fairly new to computer recording. Please help I am going nuts.
Thanks Abel

Convert the DVD's VOB files into a format that works natively in FCE. For DVD footage (which is SD), use MPEG Streamclip to do the converting. Here's a tutorial on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
MPEG Streamclip is freeware, but you may need to purchase the QuickTime MPEG-2 Playback Component from Apple if you don't have it already.
-DH

How to listen to wave files in e-mail

Similar Messages

Maybe you are looking for