How to load an infocube from more than one source system?

HI all,
Can u please tell me how to load an info cube from more than one source sytem?

Hi,
same confiig is required for one or more source system. (From Data source to update rule, obviously cube remains the same).
Its the infopackage execution which loads the data from different source system.
Regards,
Nawanit

Similar Messages

Can Insosource be fed by more than one source system

Hi
Can Insosource be fed by more than one source system?
One from R/3 and other from flat file?
Its urgent?

You can have multipple source systems to the same infosource and load them through separate infopackages.
Create a new infosource for flat file and assign it to the object ... ,
it is very similar to how you would do it for an R/3 source , but here there will be no datasource to choose froim since it will be a flat file.
Arun

How can I synchronize safely from more than one computer?

First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

You cannot do what you want.
The ipod touch can sync with ONE computer/library at a time.
When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
This is the way it is designed.

ERP system to accept tickets from more than one source

I have the following scenario.
My back end ERP system accepts tickets from my EP. The EP cert is imported into ERP.
I want to enable SSO between CRM and ERP. CRM does not interact with the EP.
Can I have more than 1 certificate imported and added to the ACL in my ERP system(i.e. from my EP and ALSO from CRM)?
Many Thanks,
Derek.

Yes. We have portal and another standalone java instance doing SSO to ERP.
-RK

How to create an index from more than one pages document?

I have 10 different pages documents. Each document is a book chapter. Now I would like to create one index for all of these chapters in a new pages-file without copying all files into one single file. How does this work?

Thanks for your answer. Than this is a real deficit of pages. Have you got any ideas for an alternative solution, that doesn´t force me to work with Microsoft? I have a document of 300 pages, having this in one document is neither practical nor stable. Thank for supporting!

How do I order prints from more than one Photo in Aperture?

I can figure out how to order prints through Apple for ONE photo but can't find how to add more photos to the order. Is there a manul for Aperture 3.4.5 version? This whole program has me confused. I need a manual I think. Thank you.

Have a look under the Help menu there's a link to the manual there.
But the easist way: make an album with the pics, then select all and order those.

Reporting from more than one infocube and also from multiple ODS

Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
Sekhar

Hi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

How to Create Field Catalogs (More than one Source Table)

Hi Data Archiving Experts,
Could you please help me how to create the Field Catalogs (More than one Source Table). If any one is having example that will help.
My scenario:
Currently we are archiving on CRM Data archiving project. We are facing one issue on creating field catalog with more than one source table.
Ex: ST -- BP1
BP2
BP3
ST info store in one table and BP1 -- BP 3 info sotre in another table. with current field catalog we are getting ST -- BP1. Our requirment is we need to show the ST -- BP3 How we can achive this.
Regards,
Srini

Hi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth

How can I put more than one source file when I am creating my installer from LV 7 Express

Hi,
I am creating my installer for my application and I would want to add more than one source file at once, how could I do it?
Thanks,
ToNi.

Hi,
I'm referring to the first executable. In other words, I have my application and I want to build and executable of it. Then I go to "Tools->Build application..." and then in the source files tab I can add my vi files but I want to add more than vi at the same time (at once) and not one by one. How can I do it?
And my second question is: When I make the installer for my application I save the configuration in a build Script file (.bld) in order to use it whenever I want. Then If from another computer different from the one where I generate the .bld file, I load it, LV tells me that something is wrong (LV says there are some errors in some VIs but It doesn't tell me what files are). Why?
Thanks in advance,
ToNi.

HT1206 Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her acc

Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her account. I have not been able to do this. Thanks

iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

How to from more than one delivery note - conversion into one invoice

Dear Experts,
How to from more than one delivery note - conversion into one invoice?
Thanks and best regards,
Wilson Hong

Dear Wilson Hong,
Single invoice for multiple deliveries will takes place based on these criterion
1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
-> Payer
-> Inco term
-> Payment term
-> Actual GI Date from Delivery
-> Shipping Condition
-> Account Assignment Group
-> Exchange rate (in case of export sale order)
-> Foreign trade data.
2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
If the above data and settings are exists you can do single invoice for multiple deliveries.
I hope this will help you,
Regards,
Murali.

Can a master data will have loading from more than one data source

Dear gurus,
I have a master data object which has every day loading from one particular data source. Now I got a requirement to load data from another data source. If we load data from more than one data source , will there be any problem with data? Will it accept loading from more than one data source.?
Regards
Rs

Hi Ram,
We can load the data to target morethan one datasource.Thats advantage in BI compare to BW. It will accept loading from more than one datasource.but you have to take care about characteristic and attributes are the same in both datasources like that.
Regards,
SVS

How to pull groups from more than one OU using weblogic "All Groups Filter" from AD.

Hi,
Please help me for pulling groups from more than one OU using weblogic "All Groups Filter" from AD.
AD structure is:
c001639domain.local
       ||
       ||
    OU=Security_Groups
                  ||
                  ||
                  >> OU=CORP_ECM---> n number of group
                  >> OU=CORP_hodata--> n number of group
                  >> OU=CORP_citrix--> n number of group
                  >> OU=CORP_driver --> n number of group
                  >> OU=CORP_temp --> n number of group
Requirement is i want to filter groups from OU=CORP_ECM and OU=CORP_hodata.
Thanks,
Jagan.

I used below option but its not working getting zero groups.
(&(objectClass=group)(|(ou=CORP_ECM,dc=Domain,dc=com)(ou=CORP_hodata,dc=c001639domain,dc=local)))

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How to load an infocube from more than one source system?

Similar Messages

Maybe you are looking for