How to load Cj01 create project for WBS level 1,2 and 3

Dear All
I want to load the project for WBS element.I had used IDOC project01 for the same but I am getting error as 'SaveReplica'method was not called up via ALE.I am presently trying with LSMW recording for tcode CJ01 in order to populate the
wbs levels 1 ,2 and 3 since the hierachy is not fixed i:e there is no limit as to how many 2 or 3 wbs levels are there so how shall i proceed with recording.If any body has migrated Projects for WBS elements please do share me.In my recording i am getting error 'Do not enter a level greater than 2'.is it that i have to carry t recording for each level seperately.
Tried with Bapi Bapi_project_maintain and all Bapis related to it most of the cases i am getting
error as to no initialization created though having executed Bapi_Ps_Initialization.
Regards
Somnath

Hi Somnath,
The BAPI, BAPI_PROJECT_MAINTAIN should work for any levels of requirement..and you dont need to initialize it. First, go through the documentation given in the SE37 transaction code. It will explain all. Just concentrate on the reference number. If you see in the example given there, two wbs elements are being created.
Then you have to use methods like create,save...unlike other BAPI's.
Just go through the documentation once.
Regards,
Vishwa.

Similar Messages

How to load an Applet application for 1000cards?

Hi Friends..
I want to know How to load an Applet application for 1000cards?..
Assume that, i have an Applet application that need to loaded into 1000cards..
So, how to solve this?
Do i must to load an application manually for each card?
Is there any another way?
Thanks in advance..

for 1000 cards you can use a "small" printer like an evolis "dualis" or something like that
we've produced thousands of cards with this method in my company.
the pro is that you can also print the cards in the same time.
they usually have simple APIS like get_new_card_from_loader(), put_card_on_contacts(), eject_card()
you can connect any reader on the printer , the raw card contacts are available on a connector.
some printers also have contactless couplers.
but remember that deploying cards in the field is not just loading an applet.
it's also a cryptographic challenge, you need to change the card keys or anyone will be able to play with your cards, adding and removing applets as they want.
typically this is achieved by using an ultra secret mother key and whatever derivation algorithm you like using data from INIT UPDATE as diversifier. example, you can TDES cipher part of the INIT UPDATE data using the mother key as TDES key, or use something involving SHA1, using a HSM if you are serious, etc.
for your entertainment here is a high volume card personnalization machine. That's amazing.
http://www.youtube.com/watch?v=6ZBF_yKRF5w

How to load master data texts for (0calmonth)

Hi pro's
i hve a issue.
How to load master data texts for 0calmonth.
any help is appreciated
regards
cheers

within the admin workbench goto source systems, right click on your source system and click on transfer global settings. There you can choose fiscal year variants and some other options to be loaded to BW.
Regards

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How can I find my password for iTunes? Forgot it and can't see how to restore or change

How can I find my password for iTunes? Forgot it and can't see how to restore or change it. It is not the same as the apple id password - or so my iPhone iTunes says - Help

I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

How can I export to PDF for Offset printing including color and grayscale photo's?

After reading dozens of forum, I still don’t found the answer.
I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
How can I export to PDF for Offset printing including color and grayscale photo’s?

Yes, the Photoshop & ID CMYK working spaces are the same
This can get difficult because the 3 programs handle soft proofing differently.
The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
If I turn on Overprint preview I get a match because I'm soft proofing for print:

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

Where can I upload a project for a friend to review and edit?

Where can I upload a project for a friend to review and edit?

Hi
If your friend is also a Captivate user, make sure that you both have same captivate versions and if you want your friend to download the project (.cptx) and edit the project and provide you the updated copy of your project then you can use Adobe Send Now. You need to sign in with your Adobe ID and password and as a free user, You can upload a project of maximum 100 MB.
Link of Adobe Send Now
https://www.acrobat.com/sendnow/en/home.html
and for Review only, kindly follow the link mentioned below
http://help.adobe.com/en_US/captivate/cp/using/WSd160b5fdf5100e8f529dcf1512656273ac5-8000. html#WSd160b5fdf5100e8f21b518f81266ee611b1-8000
Thanks and Regards
VJ

Create one workflow ( 2 level approval - manager and financial manager). An

Hi
I have requirement to Create one workflow ( *2 level approval - manager and financial manager).* And escalate it after 1 day to Financial manager's supervisor
I have no idea about escalation through BPEL Compoiste in OIM
Can please any help me out

The status can be alerted and the task assigned to weblogic due to a fault in your process. Without looking at your process or the exception, it can be difficult to say what went wrong, but check if you have the user in the system to whom you are trying to assign the task to.
As for escalation, you need to go through that link to configure escalations and in escalations you can select management chain as the route. This would escalate it to manager's manager if the manager does not work on the request for specified time. For other requirements around escalation, you will have to first get a basics right and working for you. Once you are done with that, you can post here any questions which you might have about making the complex ones and we can try to help.
-Bikash

How to Load the Resource Master for Generic Resources by Department?

We are using P6 enterprise version in our company having a central database.
Q1a.) We set the Activities view > Resource Usage Spreadsheet > Select View 1) By Resource OR 2) By Role.
The result is the spreadsheet presents the Remaining Early Units by Resource OR by Role. Other spreadsheets behave the same way. Is it possible to view the total Remaining Early Units and not have it separated by Resource OR Role?
Q1b.) We would like to find out the recommended structure to load Generic Resources (ie. professional and trades such as Civil Engineer, Mechanical Engineer, Carpenter, Welder etc.) for each Department (ie. 8221, 9362, 8524 etc.) into the Resource Library. Example: we would like to load Civil Engineer once for departments 8221, 9362, 8524, load Welder once for departments 9362, 8524, etc.
We contacted Primavera Support and they pointed us to use Roles.
Thank-you for any suggestions you may have.

i think you could try to model it like this:
- define a single "mech eng" role in the role tree (not too deep or even a flat list). no dept's mentioned here. keep the role tree strictly "speciality" oriented or anyway according to their technical classification.
Role ID     Role Name
Engr     Engineer
.......Engr.SE     Structural Engineer
.......Engr.EE     Electrical Engineer
.......Engr.ME     Mechanical Engineer
- define any number of resources (either individuals, or teams or even a combination of the two) in the resuorce tree.
1 eng with a capacity of 8h/d, a fixed formation (team) regardless of the number of individuals would still have a capacity of 8h/d if they can only accomplish tasks together. if assigning a team of 5 means means faster for fixed workload or more for fixed duration then define a fixed team (again if this is the case) as a single resource with a capacity of 40h/d or simply define and assign the required number of individual eng's 8h/d max each. use activity duration type to switch between duration driving and non-driving resource usage.
e.g.
Resource ID     Resource Name     Resource Type     Default Units / Time     Max Units/Time     Primary Role     Roles
.......*ElecEng     Electrical Engineers*     Labor     20.00h/d     20.00h/d     Electrical Engineer     Electrical Engineer
..............EE1BARBW     Barb Wire, Senior Electrical Engineer     Labor     10.00h/d     10.00h/d     Electrical Engineer     Electrical Engineer, Project AQ
..............EE2BILLS     Bill Sanders, Junior Electrical Engineer     Labor     10.00h/d     10.00h/d     Electrical Engineer     Electrical Engineer, Consultant
.......*MechEng     Mechanical Engineers*     Labor     10.00h/d     0.00h/d     Mechanical Engineer     Mechanical Engineer
..............MechEng T1     mech eng team 1     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer
..............MechEng T2     mech eng team 1     Labor     16.00h/d     16.00h/d     Mechanical Engineer     Mechanical Engineer
.....................MechEng T2.1     ME 2.1     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer, Consultant
.....................MechEng T2.2     ME 2.2     Labor     8.00h/d     8.00h/d     Mechanical Engineer     Mechanical Engineer
- create the necessary res to role associations. one employee or team (i.e. res) can be linked to one primary qualification and several other proffesions or specialities (i.e. roles)
- when assigning to activities, if a particular individual/ team is required assign directly the res. select several activities requiring mech eng, select 1 or several mech eng's and assign them (use resource security to limit user's access to certain res nodes).
- if any res with a particular role can perform the task, assign the role. later on if you decide for a res, you can assign a particular resource through the previously assigned role. decide applicable rates and h/d between role and res.
- you can track allocation in spreadsheets and histograms by resource or role (or by activity for both). if individual res have clear capacities, for roles you can chose between custon role limits (manual) and system calculated for each role based on res having that as primary qualification (user pref)
- you can report by activity / WBS / project / portfolio (tracking)
- solve over-allocation by levelling, by switching between res for the same role, etc
- optimise duration vs. load and/or # of res/roles (and viceversa)
Edited by: Tibi on Oct 9, 2009 9:40 PM
Edited by: Tibi on Oct 9, 2009 9:59 PM

How to publish Captivate (swf) projects for free

Hi Cap Users,
This is not really a question, more of a handy tip.
When I first started using Captivate I tried to find places where I could publish my projects for free. I've also seen lots of posts by instructional designers and students who want to get their projects 'out there' for little or no cost.
Here's a short vid that shows you how to publish .swf projects via Weebly.com. You'll need to create a weebly website first. It's all free and the the site builder elements are drag and drop, so you can have a simple site in place within minutes.
Weebly isn't set up for HTML5 as yet, but I'm sure that won't be far away.
Click this link to see a demonstration - saving your Cap file, uploading and publishing it.
Happy publishing!

Ok, then I Publish the folio in folio producer like Public and Free and that's all, it's ok? Then when I want to sell this folio, back to the folio producer, change to Public and Minorist and in the Android Market build the in-app product, it's ok?
PD: sorry for my english

How should I start my project for editing MP4 in Premiere E9

Hello,
I am new to the forums and to video/picture editing in general. The main disconnect I have is with all the different formats and such.
Long story short. I have Premiere elements 9. Im using a Flip Ultra HD (to my understanding it produces MP4).
I was wondering if someone could point me in the direction of the most accurate way to start my project in Premiere elements 9.
Thank you very much in advance to anyone who may be able to help.
-Jeff

You should select the Settings for a Flip Mino/Ultra HD project, then use Get Media to get the files from your camcorder into your computer.
You can see how to set up a project and get media in the first couple of tutorials in my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

How to enable SSL optimization only for a single remote WAE and specific website?

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9

Creating exe for application that contains ARINC and MIL Codes

Hi all,
I am not able to create exe for my application that contains ARINC and MIL. To be precise, the ARINC and MIL part is not working in the exe created.
Please tell me how to create an EXE with ARINC and MIL codes.

Did you install the according device drivers on the target machine? And no I don't mean the instrument drivers that you use in LabVIEW but the OS device drivers from NI (resp. AIT), that will access the hardware boards and provide an interface to the LabVIEW application. I would expect them to be part of the AIT SDK kit that comes with the boards.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to load Cj01 create project for WBS level 1,2 and 3

Similar Messages

Maybe you are looking for