How to load configuration using Cisco USB port???

on USB-flush configuration there. I try to download it gives this:
Switch#copy usbflash0: 3560-ST
Source filename [3560-st]?
Destination filename [3560-ST]?
%Error opening usbflash0:3560-st (File not found)
What is the Problem? flash formatted on most Cisco (it has decreased in numbers from 16 GB to 2.75 GB)???

Syntax is the one as Chandu poined out.
However, i see there is a space between usb0: and the filename.
"Switch#copy usbflash0: 3560-ST"
Make sure there is no space in the syntax above and also the file name is correct.

Similar Messages

Anyone know how to monitor power used on USB Port?

I have an external quickertek usb wireless device that keeps shutting down my Macbook pro. It runs fine for a few days and then locks the entire system up. Quicktek made me a special device with an external power adapter thinking the problem was the USB port being asked for more power than it could deliver but the system is still crashing. I'd like to monitor my power output on that single USB port to see if the new device is really working properly but not sure how to measure power consumption on a usb.
Can anyone tell me if this is possible and if so how?
Thanks,
glenn

cybercrypt13 wrote:
thanks guys, I'm not sure how accurate the actual current power being used is as it seems to always say 500ma but I'll play around with it and see if I can get it to work for me.
glenn
Remember that 500 ma is the limit, so if a device attempts to draw more, it most likely will be current-limited at .5A.
At least it's a start.
This might also be useful:
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWTechUSB/Articles/usbimplementation.html
And thanks
Message was edited by: nerowolfe

How can ftp service on non-standard port be load balanced using Cisco ACE.

How can ftp service on non-standard port be load balanced using Cisco ACE.For example ftp service required on tcp 2000 port

Hi Samarjit,
you can do this by specifying the port number in the class map that you create . Please find the below mentioend config guide where you can specify the tcp/udp port , range or ports or even the wild card to match the port.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/administration/guide/mapolcy.html#wp1318826
Regards
Abijith

How to read a data from USB port using JAVA

hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!

You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself??

How do I determined if the USB ports are working?

How can I determine if the USB ports are working. Macbook Pro i7.
Thanks for any help. This is a new computer to me migrating from a PC system.

Blessings to those who are able to reply with possible answers. I am sorry....but I have spent days working on getting my two USB ports to work also. I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks. I have a MacBook Pro 2011 Snow Leopard 10.6.8 I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh! I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop. Does anyone out there have any possible solutions? I see I am not alone. --A frustrated first-time Apple products owner.

How do I know whether the USB port in my macbook air is 2.0 or 3.0?

How do I know whether the USB port in my macbook air is 2.0 or 3.0? I really want to use a usb flash drive that has faster read/write speed but I don't kow if it would be supported by my macbook air - I purchased the macbook air from the apple store on autumn 2011, 1.7Ghz Intel Core i5

Eddy ~ The free Mactracker app shows USB info and much more:

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I am currently using the firewire port on my macbook pro to record dv from my camera. Can I capture video/audio using my USB port as well?ra

I've been connecting a sony PD170 via firewire to my Macbook pro to record directly using Quicktime pro. Can I use the usb port (and mini audio in) to accomplish this with a camcorder that doesn't have a fire wire port but does have USB out?

It could just be a bad disc - I use Verbatim and have only had one fail in a ten-year time period. Try getting a batch of Verbatims and see if you have any problems. I didn't even know that there were Kodak branded discs...
Clinton

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

How to load hierrarchies using dtp using flat file in bw ineed clear ste

how to load hierrarchies using dtp using flat file in bw ineed clear steps

Hi,
If you want to load InfoObjects in the form of hierarchies, you have to activate the indicator with hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the whole hierarchy or the hierarchy structure is to be time-dependent, whether the hierarchy can contain intervals, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
1.Defining the source system from which you want to load data:
Choose Source System Tree ® Root (Source System) ® Context menu (Right Mouse Button) ® Create.
For a flat file, choose: File System, Manual Metadata; Data via File Interface.
2.Defining the InfoSource for which you want to load data:
Optional: Choose InfoSource Tree ®Root (InfoSources) ® Context Menu (Right Mouse Button) ® Create Application Component.
Choose InfoSource Tree ® Your Application Component ® Context Menu (Right Mouse Button) ® Create InfoSource ® Direct Update
Choose an InfoObject from the proposal list, and specify a name and a description.
3.Assigning the source system to the InfoSource
Choose InfoSource tree ® Your Application Component ® One of your InfoSources ® Context Menu (Right Mouse Button) ® Assign Source System. You are taken automatically to the transfer structure maintenance.
The system automatically generates DataSources for the three different data types to which you can load data.
      Attributes
      Texts
      Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
4.Maintaining the transfer structure / transfer rules
Choose the DataSource to be able to upload hierarchies.
Idoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject, for which hierarchies are loaded. With this transfer method, during loading, the structure is converted to the structure of the PSA, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
5.Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR
The system transfers the settings for the intervals and for time-dependency from the InfoObject maintenance. Depending on which settings you have defined in the InfoObject maintenance, further table fields can be generated from the system.
The valid from and valid to field is filled if you select Total Hierarchy Time-dependent in the InfoObject maintenance. The time-dependent indicator is activated if you select the Hierarchy Nodes Time-dependent option in the InfoObject maintenance.
6.Save your entries.
Depending on which settings you defined in the InfoObject maintenance, additional fields can be generated from the system. Also note the detailed description for Structure of a Flat Hierarchy File for Loading via an IDoc and for Structure of a Flat Hierarchy File for Loading via a PSA.
Also find the below blog for your reference...
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
You can load hierarchy using process chain...
Find the below step by step procedure to load hierarchy using process chain...
http://help.sap.com/saphelp_nw70/helpdata/EN/3d/320e3d89195c59e10000000a114084/frameset.htm
Assign points if this helps u...
Regards,
KK.
Edited by: koundinya karanam on Apr 8, 2008 1:08 PM
Edited by: koundinya karanam on Apr 8, 2008 1:09 PM

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Check car manual to see if it supports charging ,some do not
or use a USB 12 volt plug in for the "cigarrette lighter" socket and plug into that ,probably a better solution

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot. I have been able to do this in the past as recently as a few weeks ago.... Help please..

Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again.

Is it possible to charge a Canon camera battery pack using a USB port?

Is it possible to charge a Canon camera battery pack using a USB port?

bkroczak wrote:
Either is fine. I looked on ebay and battery pack chargers seem to be available to plug into USB ports. Until now my cameras only took regular batteries. I'm not sure if it will take an awful lot longer than charging at 110V but at least it's possible.
I'd be surprised if this effort pans out. The only Canon camera I've ever owned that could charge its own battery was a G-5. And I'm pretty sure it didn't do it through a USB port. It had, IIRC, a special charging port. and the charger itself ran on 110VAC.

Acquiring Images using the USB port

I want to acquire Images using the USB port of the PC. Is it possible to acquire images using the USB port and analyze the image using IMAQ library. If we use the USB port direct then we may not need the IMAQ vision acquisition card.

Try Irene's drivers (see previous answer above), or Peter Parente's webcam drivers (www.mindofpete.org).
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsib
ility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Connecting wirelessly using the USB Port

I recently saw a small device at Best Buy that allows my computer to connect remotely to the internet (via cable modem) using the USB port that costs only $60. Do you know of this and can you comment?

Are you trying to do this because your Ethernet port is broken? Is it a wireless device? Can you link to a product description?

How to load configuration using Cisco USB port???

Similar Messages

Maybe you are looking for