How to load CRM Contact Persons that became Sol to party to ERP

Hi Gurus,
I would like to Know if there´s any way to upload Persons form CRM to a sold to party organizzation in ERP.
I Know that it can be done from ERP to CRM as i read in the forum: "Thread: How to replicate a customer from ERP to a Person in CRM " but i need to do it from CRM to ERP not from ERP to CRM.
In ERP the client do not use consumers, but in CRM is very usual to find persons that became Sold to parties and has to be invoiced in erp.
Can anybody help me?
Marga RIbes

In the Control data tab, customer classification screen area, make sure that the flag is CUSTOMER and not CONSUMER.
rest settings, like mapping of number ranges/account group setup etc. are in any case required.
hope this helps.

Similar Messages

Replication CRM contact person to R3 as contact person

Hi,
I'm trying to replicate CRM contact person from CRM to R/3 via MW.
First initial created from R/3 to CRM.
In the daily business the agent will create a new contact person thru the Call center transaction in CRM. (web client)
How I can be sure that the contact person create correct in R/3 and attached to the correct Customer?
Please advice.
Ety

Hello Ety ,
I would like to explain how contacts are exchanged between CRM and R/3:
1.If you create a contact person in CRM and save it ,bdoc is sent to
R/3 but it is not processed,as it is not possible to create a contact
in R/3 without a Customer.Therefore you see an information message
in the Bdoc and it doesnot indicate any problem.
2.When you assign this contact to any other BP like any sold-to-party
then the BUPA_MAIN bdoc of the contact and also the BUPA_REL Bdoc
containing the relationship are sent to R/3.Then these bdocs are
processed and the contact is created for the Sold-to-party(Customer)
in R/3.
Incase you want to upload contacts, you should use the TXn.CRMM_BUPA_MAP
for the Business Partner to which the contact is assigned to.(i.e the sold-to-party)

How to maintain the contact person in Business Partner ?

Hi Experts,
Could you help to resolving the below Requirement.
__ +Requirement:+__
How to maintain the contact person in Business Partner ?
How to get the Contact person in Is-Media Documents?
Thanks& Regards
Venkat

Dear Venkat,
In SD Customer Master data, we can maintain Contact Person in General Data tab page.
For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
(Or)
While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
Check from your end.
Best Regards,
Chandramohan

How Can You Track a Person That Has Your IPhone And You Want It Back

How Can You Track a Person That Stole Your IPhone And You Want It Back

Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail".

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail". Furthermore, I cannot attach any type of documents to my emails (Yahoo says there is a problem). I suspect there is a setting somewhere, but I don't know where. Javascript is enabled, so I am out of options

Which os are you using?
Yahoo issues should be posted in their forums or contact Yahoo tech support.

How do replicate the contact person to ERP partner fuction from CRM

All experts,
I already replicated contact person from CRM to ERP,but the contact person just appeared in tab contact person in ERP customer general data.
Actually,when i created contact person relationship in CRM,i could assgin contact person to a salse area,so I want to replicate contact person to tab partner fuction in customer sales area data in ERP. pls give me a light. thks
Raymond J

Hi Raymond,
I believe the contact person in question is assigned only as a partner function in R/3. Therefore you will only see the usage of that BP as a partner function, but not the relationship specific data.
You will need to create a contact person relationship for the BP.
So the relationship specific data will not be visible for a contact person in R/3 which is only assigned as a Partner Function in R/3.
Can you please check this on your system?
I hope this helps.
Best regards,
Ita

Map R/3 contact person address to CRM contact person address

Hi,
Does anyone know how to enhance the middleware so that the business address of contact person in R/3 can be mapped/downloaded to the BP standard address (shown up in BP transaction) in CRM ? The business address of the contact person in R/3 is currently mapped to BP relationship address in CRM, while the home address of the contact person is mapped to the BP standard address.
Thank you for the help,
Regards,
-James

Hi,
We have the sam issue to solve!
Found any answers yet?
Best Regards, Cem

How to fetch the contact person of the Vednor in SRM

Hi All,
   I need to display the Contact Person of the vendor which is maintained in XK03(contact person(view)).
     ->How to fetch that name in the SRM ?
    ->Is any FM exists ?
Thanks and Regards
Channappa

Hello Channappa,
Contact person is only significant for Bid Invitations.
For Bid Invitations, you don't have a Vendor but a Bidder with one or several Contacts Persons.
So, when you are in BBP_BID_INV transaction, when you look for bidders to link to your bid invitation, you will find their contacts: this is standard process.
In SAP GUI transaction BP, you will see bidder contacts if customizing done to use BBP_VENDOR_SYNC report to replicate vendors is correctly maintained.
Regards.
Laurent.

How to Upload the Contact Person to Cremas05 Idoc

Hi Guru's,
I have one question, I am a novice in SAP.
I want to upload the contact person to Cremas05 Idoc . This data is present on Debmas Idoc but not in Cremas.
Do you have an idea how we can do?
Regards,
Moh.

Hello Moh,
I'm sorry for the information but there is no ALE support for the vendor contact persons.
This feature has not been developped and there is no plan to develop it for the next releases.
The only solution I can see is a consulting project.
SAP can help for you this.
If you are interested in such activity, I would encourage you to open a customer message in SAP marketplace under component LO-MD-BP-VM and ask that the message gets forwarded to development support. You may also add my name too in order to speed up processing.
Sorry for that information
Best regards
Alain

How to get the Contact person name of Account site level contact person

Hi All,
I have contact person defined at account level and other at account site level.
I am trying to print the site leve contact name in my AR Invoice report.
What i used is bill_to_site_use_id a input in the below query
select hp2.party_name
from
HZ_CUST_SITE_USES_ALL hcs,
HZ_CUST_ACCT_SITES_ALL has,
hz_party_sites hps,
hz_parties hp,hz_parties hp2,
hz_relationships hr
--HZ_ORG_CONTACTS HO
where hcs.CUST_ACCT_SITE_ID=has.CUST_ACCT_SITE_ID
and hps.PARTY_SITE_ID=has.PARTY_SITE_ID
and hp.party_id=hps.PARTY_ID
and hr.subject_id=hp.party_id
and hr.RELATIONSHIP_TYPE = 'CONTACT'
and hp2.party_id=hr.OBJECT_ID
and hr.OBJECT_TYPE ='PERSON'
--and ho.PARTY_RELATIONSHIP_ID=hr.relationship_id
and hcs.SITE_use_ID=3398 -- from (ra_customer_trx_all)
But I get two records. So how can I differentitate the account contact and site contact.
Am I missing any table or join. Or is the input provieded is not fine.
Please help
Thanks

Hi -
Please use the below code to get the Contacts at the Account level.
where Sold to Org id is the Customer Account Id.
SELECT hp2.person_last_name||', '||hp2.person_first_name
FROM apps.hz_parties hp,
apps.hz_parties hp2,
apps.hz_relationships hr,
apps.hz_cust_accounts hca
WHERE 1 = 1
AND hca.party_id = hp.party_id
AND hca.cust_account_id = :sold_to_org_id
AND hr.subject_id = hp.party_id
AND hr.relationship_type = 'CONTACT'
AND hp2.party_id = hr.object_id
AND hr.object_type = 'PERSON'
AND hp.party_id = hr.subject_id
Thanks
Vyaghresh
Edited by: user11990386 on Jun 20, 2011 2:33 PM

How to modify the contact persons company address changes

Hi Friends,
My requirement is i want to update the address of the contact person in relationships. Actually when we are maintaining the relationships it is automatically taking the Accounts address in company address field but i wants to maintain the different address for each contact person related to the particular account for that i used Bapi_bupa_contp_addr_change functions module as well as Bapi Transaction Commit also but it is not helpful.
       I want to change the contact persons address as per flat file, so please let me is there any fuction module for changing the address of a contactt person in relationships.
Regards
Kumar

Hi Kumar,
could you solution this issue?
I use this FM, I cna Insert new telephones por relationship but, I can't delete and update.
Can U help me? my code:
data : i_bapiadtel like BAPIADTEL occurs 0 with header line,
       i_bapiadtel_x like BAPIADTELX occurs 0 with header line,
       i_return LIKE bapiret2 OCCURS 0 with header line.
i_bapiadtel-telephone = '937102020'.
i_bapiadtel-std_no = 'X'.
APPEND i_bapiadtel.
i_bapiadtel_x-telephone = 'X'.
i_bapiadtel_x-std_no = 'X'.
i_bapiadtel_x-updateflag = 'D'.
APPEND i_bapiadtel_x.
CALL FUNCTION 'BAPI_BUPR_CONTP_ADDR_CHANGE'
EXPORTING
    businesspartner = '0020034745'
    contactperson   = '0090004124'
TABLES
    bapiadtel       = i_bapiadtel
    bapiadtel_x     = i_bapiadtel_x
    return          = i_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = 'X'.
Thanks in advance.
Sergio

How do I clear a persona that was added accidentally by my child?

I need to clear a persona that was added accidentally to my foxfire at work. It is very hard for me to concentrate with this on. I just want it blank again. How do I do that.?
== This happened ==
Every time Firefox opened
== It was accidentally added when an update was added

'''Use default theme'''
1. On top of Firefox, on the menu bar, select Tools
2. In the drop-down menu, select <u>Add-ons==
3. Select the Themes Panel
4. Click on the default theme. Select Use theme
5. OK
</u> Uninstall Themes:===
1. In the add-ons window, select the '''Themes Panel'''
2. Select the theme you want to uninstall
3. Click Uninstall. Again when prompted

TCA - How to define/convert Contact Person Name???

Hi Guys,
We have a requirement in our implementation where we need to define "CONTACT PERSON NAME" along with defining the contacts like Phone numbers, emails etc....
We are using API - " hz_contact_point_v2pub.create_contact_point" to create a contact but this doenst allow us to define "Contact Person Name"
Please advice....
Cheers,
KK

Hi -
Please use the below code to get the Contacts at the Account level.
where Sold to Org id is the Customer Account Id.
SELECT hp2.person_last_name||', '||hp2.person_first_name
FROM apps.hz_parties hp,
apps.hz_parties hp2,
apps.hz_relationships hr,
apps.hz_cust_accounts hca
WHERE 1 = 1
AND hca.party_id = hp.party_id
AND hca.cust_account_id = :sold_to_org_id
AND hr.subject_id = hp.party_id
AND hr.relationship_type = 'CONTACT'
AND hp2.party_id = hr.object_id
AND hr.object_type = 'PERSON'
AND hp.party_id = hr.subject_id
Thanks
Vyaghresh
Edited by: user11990386 on Jun 20, 2011 2:33 PM

Reader XI: how to load multiple files so that I can show them in one instance of full screen mode?

It is possible to show a pdf file in full screen mode in acrobat reader XI (windows).
It is indicated that this is also possible with multiple files.
I do not understand how to accomplish this; How can I load more than one file to show in the full screen mode?
can anyone explain this to me?
Thanks in advance!

frankvanrooij wrote:
It is indicated that this is also possible with multiple files.
Where do you see that?

How to load iPhone contacts to bluetooth Corolla Stereo

I can't load my iPhone's contacts onto the my Bluetooth enabled car stereo on my new Toyota Corolla.
The phone is sync'ed and can receive calls but can't get the thing to get my phone numbers.

The system MUST support the Bluetooth PBAP profile (Phone Book Access Protocol). If it does, the contacts should be transferred automagically. If it does not, then you can't do that. As suggested, consult the manual and/or contact Toyota to see if there is an update available for your system.

How to load CRM Contact Persons that became Sol to party to ERP

Similar Messages

Maybe you are looking for