How to load delta, changing the name of file for every day with open hub?

Hi gurus,
I load daily delta data from ODS to flat file, using open hub.
The file is located on server. Now, if I do delta load from ODS to flat file, every day the file is overwritten, because it has the same name.
I want to load delta data everyday to different file name, for example BW_20060101 , BW_20060102, BW_2006_01_03 ....
How do I do that?
Best regards,
Uros

Hi Uros,
This thread may give you some idea
Changing the file name n Flat file Extraction
https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002201112003E
Regards,
BVC

Similar Messages

HT4864 How do I directly change the incoming mail server for icloud in Mail? It's grayed out.

How do I directly change the incoming mail server for icloud in Mail? It's grayed out.
I ask this because I have suddenly stopped receiving most e-mails in Mail. I've found that my incoming mail server (p01-imap.mail.me.com) is different from what the Apple mail setup assistant recommends (mail.me.com), but I cannot change it because it is grayed out. Any ideas?

I'm afraid that AFAIK you've gone through the card. You could try Support, though I don't know how helpful they are likely to be.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

HT3965 How does do I change the name of my iPhone in iTunes11?

The new iTunes11 has changed the layout of the sidebar. It is not possible to directly change the name of the iphone/ipod. Does anyone know how this is done in the new version?

Hi.
1) Click on 'Devices'.
2) Locate your iPhone.
3) Click once on the image - this will open up to show the contents of your iPhone (much the same as it used to)
4) Click once on the name of your iPhone. This will make the name editable.
5) Click 'Done' to finish and save.
Hope this helps.

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

Hey guys,
I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
"Windows could not parse or process the unattend answer file for pass [specialize]."
So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
from the Windows 8 & Server 2012 unattend.xml files:
<IEWelcomeMsg>false</IEWelcomeMsg>
So I simply commented it out like so:
Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
Hope my time spent saves someone else some grief!

I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam

How do I change the name of file from save in web receipts folder?

I use safari to do online banking and when I have paid a bill or transferred money and when it is complete I use save to web receipts folder to keep a record of the transaction.
The problem is that the page always has the same name so there is only the record of the last transaction for that service. Does anyone know a way to change the same of the file that is saved?

Hi DPertovt,
After you download/save the file to your destination folder where you keep your records, only select the file ones an rename/chance the file name, date anything you like.
Good luck ...
Dimaxum

I have changed the name I use for my Apple ID. How do I change it on my iPhone?

I resolved this and do not know how to remove or cancel it. Please ignore.

Did you change the email address of your existing Apple ID, or did you create a totally new Apple ID? Assuming that you did it correctly and just changed the email address on your Apple ID, go to Settings/iCloud and turn off Find my iPhone. You will need the passcode for the OLD email address to do this. Then log out of iCloud on the phone. Log in with the changed address. Do the same for Settings/messages, Settings/Facetime and Settings/iTunes&App Store.

How do I change the default storage file for PDFs?

I want to save PDFs. Now the default files are in AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N. I have to drill UP through all those to get to where I want to save the item in PDF Files. How can I change the default?

The file path (AppData/Local/Microsoft/Windows/Temporary Internet Files/Content IE5/V6ZGH08N) that you posted is the internet cache of the MS Internet Explorer and not a location that Firefox uses although MS plugins like the Windows Media Player will use that location.
Files that are opened in an external program will be saved to the temp folder as specified in the %temp% and %tmp% environment variables.
What makes you think that Firefox is saving PDF file in that folder?
Are you using an extension like IE Tab or IE View to open specific locations with IE?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How do you change the date/currency format for every user in OSX 10.6?

I imaged a bunch of mac labs at work only to realize the base image has the date/currency set for United States rather then United Kingdom. The regional settings are correct.
I tried changing it on the local admin account but it does not affect a new user that logs onto an AD account.
Workgroup manager does not seem to offer anything either unless I am missing it.
Any ideas?

Hi Uncle,
Page 116 of the Pages'09 User Guide: Control Click the date, Edit Date and Time.
Date and time can also be in a table. Format the table cell.
The User Guide is well worth a read. Download it from the Help menu in Pages.
Regards,
Ian.

How do I batch change the name of photos in finder

I have downloaded 600+ photos from 3 various cameras from a recent holiday. Some have the same title i.e. IMG 001.jpg second copy is named IMG 001 1.jpg. I want to rename all the photos: Norway1 - 2- 3- 4- 5 etc ( not in iPhoto) but in finder folder. Can it be done?

Of course. There are dozens of apps that will do this:
http://www.macupdate.com/app/mac/6322/a-better-finder-rename
http://manytricks.com/namemangler/
to name but two. Or you can do it with Automator.

Change the kernel26 config file for ati users?

Hi,
To get the propriatary ati drivers working you need to change some parts of the kernel from build in to module. What about changing this in the standard kernel26 so that this will make it easyer to install ati drivers (and update the kernel) for a lot of users. I think it isn't hard to change because the config file is kernel26 package.
I don't know much about kernels and stuff so I don't know if it will be negative for some users? Else of course it shouldn't be changed because only a small percentage of arch users use propiatary ati drivers.
Please give me your opinion about this
David
edit: typo

I don't think that Xentac wrote that, in this thread qwerty wrote it, or is this the same person?
In that thread is also the reason why they need to be modules, the propriatary ati drivers interact with the AGP modules from the kernel. For some reason this doesn't work when they are compiled in the kernel. Shall I send qwerty a message if he can explain better why modules are needed?
Also I'm trying(never made a PKGBUILD...) to merge the two PKGBUILDS from that howto in one so that in the future to install ati drivers one can just type pacman -S ati-drivers, add the module to rc.conf and change xorg.conf to get it working, that should be really cool I think
edit: I just found out this isn't needed since I found ati packages in link's reposatority! The only strange thing is that they depend on an older kernel

How do I automatically save the config of an ASA every day?

Is it possible to automatically save the config files of an ASA to a central server on the network? We have a unix machine with syslog and snmp running.
Thx,
Marc

You can pull the config via SNMP WRITE which can be dangerous. There are commercial/open source tools that will go out grab the config. Search keyword cisco at sorceforge for some of the open source tools. For commercial tools, take a look at www.solarwinds.com.
Hope it helps.

For some reason firefox defaults to Montreal and Gatineau as my location on sympatico.ca. I'm in ottawa-tried changing the defaults to Ottawa but every time I open the page it lapses back to French. Doesn't happen with Explorer so a Firefox issue....

see question above

* [[Software Update Failed#w_run-as-administrator|Run as Administrator]]
-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox
-> click '''Firefox''' button and click '''Options''' -> '''Privacy''' panel -> '''History''' section -> ''under'' '''Firefox will:''' ''select'' '''"Use Custom Settings for History"'''
* Remove Checkmark from:
*# '''Always use Private Browsing mode'''
*# '''Clear History when Firefox closes'''
* place Checkmark on:
*# '''Accept Cookies from sites'''
*# '''Accept Third-party Cookies''' -> ''under'' '''Keep Until :''' ''select'' '''They Expire''' -> Now click '''Exceptions''' button and click '''Remove''' button for all entries which have Status set to other than '''Allow''' -> click Close
* Click OK on Options window -> Restart Firefox
Check and tell if its working.

How do Change the name of a mailbox iOS8?

iOS 8.0.2
In past operating systems I been able to give short names to my different email accounts, can't work out how to edit or change the names in this operating system.
Any help would be appreciated.
Best
Be

Hi Befromlondon,
To change the name of the account - iOS calls that the description - go to Settings > Mail, Contacts, Calendars > select the account > select the Account at the top > select Desctiption > delete the old name and enter the new one.
It is similar to the process of setting up a new account, described in this article -
Add an email account on your iOS device
Thanks for using Apple Support Communities.
Best,
Brett L

How can I change the names of Bluetooth mice?

I have several Macs and even more Bluetooth mice. Several of these have the same name (e.g. Irrational's Mouse, Apple Wireless Mouse). That doesn't seem to confuse OS X, but it does confuse me, and I'd like to be able to give the mice individual names.
I have seen several articles on how to change the name of an iPhone, but so far absolutely nothing regarding how to set or change the name of a mouse. The neither the Bluetooth control panel nor the Mouse control panel seem to have no offerings for renaming.

With the device you want to rename connected go into the Bluetooth system preferences pane, click the device then choose Rename from the Gear menu at the bottom of the window.

How to load delta, changing the name of file for every day with open hub?

Similar Messages

Maybe you are looking for