How to load hierarchies

Hi sdn
How we can load hierarchie in BW if customer had created new one in r/3 side
related to cost centre
I'm not able to find it out in rsa6 and rsa5 datasource for that hierarchy is we need to generate data source for the hierarchy
rubane

HI,
   to load hierachy if u do, not find the datasource go to
rso2 create a datasouce with table/view name as hieracht table and save it
now replicate it to bw.
now u can create transformation bt source and target and load data.
regards

Similar Messages

  • How  to Load  Hierarchies  from flatfile in BI7

    Hello Gurus, 
    How  to load  Hierarchies from flat  file  in  BI7
    As  when  creating datasource  in  BI7,
    IT  GIVES  FOLLOWING  OPTIONS 
    TRANSCTION  DATA 
    MASTER  DATA  TEXTS
    MASTER  DATA  ATTRIBUTES...
    ALL  THESE   WE BRING  TO  PSA LEVEL BY  INFOPACKAGE  AND  SEND  DATATARGET  BY  DTP...
    But  how  about  Hierarchies... 
    Looking for  reply 
    Regards 
    Guru

    Look at the below blog for step by step procedure :
    Hierarchy Upload from Flat files
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

  • How to load hierarchie with IDOC as data transfer method

    hi ,this is balaji, i have doubt.
    can any one please explain, how to up load hierarchies  using IDOCs. If any material provided could be helpful.And also give me what are the pros and cons.
    regards
    balaji.p

    HI Balaji,
    Check out the following link to load hierarchies:
    http://help.sap.com/saphelp_bw33/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
    regards

  • How to load hierarchies using process chains

    Hi ,
    Can any one please explain the steps for loading hierarchies using process chain.whenever i drag the hierarchy infopcakage Save variant is also coming by default,so do we need to have different SAve variant for different hierarchy infopackages or can we have one save variant for all the hierarchy variables.
    Thanks,
    Vaka

    Hello Veka,
    How r u ?
    Yes ! SAVE Variant & Attribute Change Run will add up while loading the Hierarchy InfoPackage.
    Provide the InfoObject Name for which u r loading the Hierarchy in the SAVE variant and SAVE it. The same will be transferred to the Attribute Change Run also.
    If u r creating the Chain with more InfoPackages then have the Save Variant & Attribute Change Run at the last.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Loading hierarchies in BW from excel

    Hi all ,
    how to load hierarchies from excel into the BW .
    do the excels need to be in .csv format or can they be loaded from .xls format.
    do i need to have a specific format of the columns in excel as a pre-requisite for loading .
    please also let me know all pre-requisites for format of excel.

    Hi Neeraj,
    the file needs to be in a special format and depends on the hierarchy of your infoobject, whether it is time-dependent or not. You can see the necessary file structure if you goto infosource, choose your hierarchy datasource. then you will find a button hierarchy structure. If you press it you will see a table with the expected columns. The file should be an csv file. You select it in the infopackage to your infosource. You can upload it directly from your desktop but only if you start the package immediately. The file must not be in use by anyone other, otherwise load fails. be careful if you number your nodes. the number must be unique
    ue in the file. the node numbers are the keys for your infoobject or of infoobject 0HIERNODE for text nodes.
    I'm looking for a sample file if you want.
    Kind regards,
    Juergen

  • Steps to load Hierarchies into BPC

    Hi All
    I am new to SAP BPC.I have the following doubts on BPC.
    1.Can anyone let me know how to load hierarchies into BPC. If you have any links which explain this procedure its appreciated you pass on it to me.
    2. Difference between Planning and Forecasting.
    Thanks and Appreciate your quick response.
    Thanks & Regards
    ark

    Hi Ark-
    There is an excellent paper on how to load master data (including hierarchies) into BPC located at:
    [https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides]
    The article is titled: "How Tou2026 Automate BPC 7.0, version for the NetWeaver Platform Master Data Loads from BW to BPC".
    Planning and Forecasting are business processes.  Planning implies a process that is invoked to predict future performance.  More typically businesses use the terms Budgeting and Forecasting to describe how far out in time a prediction is made.  Budgeting is a process that delivers at least a full future year of performance expectations.  Forecasting is very similar to Budgeting forward looking view; however forecasting is typically focused on the current year's performance.  Forecasting will typically combine some actual values with a projection of the balance of the current year's anticipated results.  Each customer may call these activities by their own internal naming conventions.
    Regards,
    Sheldon

  • In how many ways we can load hierarchies to SAP BW and which transfer mthd

    Hi guru's,
    In how many ways we can load hierarchies to SAP BW and which transfer method is best.
    can anyone explain me with suitable example.
    Thanks,
    Madhu Raj.

    There are standard datasources available for hierarchies also. If the standard datasource does not satisfy your requirement you can always load a hierarchy using flat file. Refer to the below link for the same
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

  • How to load master data and hierarchies from R/3 systems

    HI all,
    how to load master data and hierarchies from R/3 systems.
    Please explain the steps.
    Thanks,
    cheta.

    HI,
    Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
    Generally, the control parameters for data transfer from a source system are maintained in extractor
    customizing. In extractor customizing, you can access the corresponding source system in the source
    system tree of the SAP BW Administrator Workbench by using the context menu.
    To display or change the settings for data transfer at source system level, choose Business
    Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
    Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
    limits can be followed.
    In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
    DataSources. You can determine the size of the data packet, the number of parallel processes for
    data transfer and the frequency with which the status IDocs are sent, for every possible update
    method for a DataSource.
    To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
    In this way you can, for example, update transaction data in larger data packets in the PSA. If you
    want to update master data in dialog mode, smaller packets ensure faster processing.
    Hope this info helps.
    Thanks,Ramoji.

  • How to load a Hierarchy after a change in the R/3 system?

    Hi All,
    We have a hierarchy in BW hat we extract from R/3. But now they have added two new nodes to the hierarchical structure which is not being reflected in the BW version of the hierarchy. Can you tell me how to load into BW the latest version of the R/3 hierarchy with those two new nodes??
    Thanks Much for any Input,
    Reddy

    Hi Reddy,
    If you have modified just the function module to populate the hierarchy in R/3 then the hierarchies should load fine on BW. However if you have changed the datasource and there is a datasource(active) in the transport request in R/3 then you would need to replicate the datasource in BW and then load the hierarchy. Hope it helps.
    Bye
    Dinesh

  • SQL*Loader: How to load multi-line report data?

    Hi,
    is it possible to use SQL*Loader to load data from a hierarchical structured fixed column ASCII file like this
    001 scott
    New York 01.01.2002 1234
    Chicago 15.10.2001 9876
    002 smith
    Los Angeles 24.12.1999 5678
    Washington 01.12.1999 0000
    Chicago 01.01.2000 1111
    into one database table:
    id name city day code
    001 scott New York 01.01.2002 1234
    001 scott Chicago 15.10.2001 9876
    002 smith Los Angeles 24.12.1999 5678
    002 smith Washington 01.12.1999 0000
    002 smith Chicago 01.01.2000 1111
    The number of lines per name is unlimited, the next line starts after a separating ---- line.
    We cannot change the format of the text file to import.
    There is an example in the documentation that shows how to load a structure like the following via insert triggers:
    001 scott New York 01.01.2002 1234
    Chicago 15.10.2001 9876
    002 smith Los Angeles 24.12.1999 5678
    Washington 01.12.1999 0000
    Chicago 01.01.2000 1111
    But we have the name information on a separate header line, so I don't know if we can use a similar technique here.
    regards
    Sven

    Try enclosing your strings with e.g. a double-quote. To do so, the control file needs the following (example):
    LOAD DATA
    REPLACE
    INTO TABLE test          
    FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    id1,
    id2,
    id3,
    id4,
    )of course this does mean that your data must change...
    L.

  • How to load hierrarchies using dtp  using flat file  in bw  ineed clear ste

    how to load hierrarchies using dtp  using flat file  in bw  ineed clear steps

    Hi,
    If you want to load InfoObjects in the form of hierarchies, you have to activate the indicator with hierarchies for each of the relevant InfoObjects in the InfoObject maintenance. If necessary, you need to specify whether the whole hierarchy or the hierarchy structure is to be time-dependent, whether the hierarchy can contain intervals, whether additional node attributes are allowed (only when loading using a PSA), and which characteristics are allowed.
    1.Defining the source system from which you want to load data:
    Choose Source System Tree ® Root (Source System) ® Context menu (Right Mouse Button) ® Create.
    For a flat file, choose: File System, Manual Metadata; Data via File Interface.
    2.Defining the InfoSource for which you want to load data:
    Optional: Choose InfoSource Tree ®Root (InfoSources) ® Context Menu (Right Mouse Button) ® Create Application Component.
    Choose InfoSource Tree ® Your Application Component ® Context Menu (Right Mouse Button) ® Create InfoSource ® Direct Update
    Choose an InfoObject from the proposal list, and specify a name and a description.
    3.Assigning the source system to the InfoSource
    Choose InfoSource tree ® Your Application Component ® One of your InfoSources ® Context Menu (Right Mouse Button) ® Assign Source System. You are taken automatically to the transfer structure maintenance.
    The system automatically generates DataSources for the three different data types to which you can load data.
          Attributes
          Texts
          Hierarchies (if the InfoObject has access to hierarchies)
    The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
    4.Maintaining the transfer structure / transfer rules
    Choose the DataSource to be able to upload hierarchies.
    Idoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject, for which hierarchies are loaded. With this transfer method, during loading, the structure is converted to the structure of the PSA, which affects performance.
    PSA transfer method: The transfer methods and the communication structure are also generated here. 
    5.Maintaining the hierarchy:
    Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
    PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields.  This option allows you to load characteristic values having a length greater than 32 characters.
    Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
    The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
    The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
    Description
    Field Name
    Length
    Type
    Node ID
    NODEID
    8
    NUMC
    InfoObject name
    INFOOBJECT
    30
    CHAR
    Node name
    NODENAME
    32
    CHAR
    Catalog ID
    LINK
    1
    CHAR
    Parent node
    PARENTID
    8
    NUMC
    First subnode
    CHILDID
    8
    NUMC
    Next adjacent node
    NEXTID
    8
    NUMC
    Language key
    LANGU
    1
    CHAR
    Description - short
    TXTSH
    20
    CHAR
    Description - medium
    TXTMD
    40
    CHAR
    Description- long
    TXTLG
    60
    CHAR
    The system transfers the settings for the intervals and for time-dependency from the InfoObject maintenance. Depending on which settings you have defined in the InfoObject maintenance, further table fields can be generated from the system.
    The valid from and valid to field is filled if you select Total Hierarchy Time-dependent in the InfoObject maintenance. The time-dependent indicator is activated if you select the Hierarchy Nodes Time-dependent option in the InfoObject maintenance.
    6.Save your entries.
    Depending on which settings you defined in the InfoObject maintenance, additional fields can be generated from the system. Also note the detailed description for Structure of a Flat Hierarchy File for Loading via an IDoc and for Structure of a Flat Hierarchy File for Loading via a PSA.
    Also find the below blog for your reference...
    /people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
    You can load hierarchy using process chain...
    Find the below step by step procedure to load hierarchy using process chain...
    http://help.sap.com/saphelp_nw70/helpdata/EN/3d/320e3d89195c59e10000000a114084/frameset.htm
    Assign points if this helps u...
    Regards,
    KK.
    Edited by: koundinya karanam on Apr 8, 2008 1:08 PM
    Edited by: koundinya karanam on Apr 8, 2008 1:09 PM

  • How to load hierarchy from file into InfoObject with compounding Attr & LN

    Hi,
    I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
    NodeID     InfoObject     Node Name     Link Name     Parent ID     Language     Short Text     Medium Text     Long Text
    1     0HIER_NODE     CC_HIER               EN     Cost Center Heirarchy     Cost Center Heirarchy     Cost Center Heirarchy
    2     YCOSTC0     C001          1     EN     CC 1     Cost Center 1     Cost Center 1
    3     YCOSTC0     C002          2     EN     CC 2     Cost Center 2     Cost Center 2
    4     YCOSTC0     C003          2     EN     CC 3     Cost Center 3     Cost Center 3
    5     YCOSTC0     C004          3     EN     CC 4     Cost Center 4     Cost Center 4
    6     YCOSTC0     C005          3     EN     CC 7     Cost Center 7     Cost Center 7
    7     YCOSTC0     C006          4     EN     CC 5     Cost Center 5     Cost Center 5
    8     YCOSTC0     C007          4     EN     CC 8     Cost Center 8     Cost Center 8
    9     YCOSTC0     C008          4     EN     CC 10     Cost Center 10     Cost Center 10
    10     YCOSTC0     C009          7     EN     CC 6     Cost Center 6     Cost Center 6
    11     YCOSTC0     C010          6     EN     CC 9     Cost Center 9     Cost Center 9
    Thanks
    Akila R

    Hi -
        Check the following link.
    Hierarchy Upload from Flat files
    Anesh B

  • How to load flat files to BI

    Hi All,
    I am new to SAP BI. PLease tell me how to load excel files to BI.

    hi,
    For BI 7.0 basic step to laod data from flat (excel files) files for this follow the beloww step-by step directions ....
    Uploading of master data
    Log on to your SAP
    Transaction code RSA1u2014LEAD YOU TO MODELLING
    1. Creation of Info Objects
    u2022 In left panel select info object
    u2022 Create info area
    u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
    u2022 Create required info objects and Activate.
    2. Creation of Data Source
    u2022 In the left panel select data sources
    u2022 Create application component(AC)
    u2022 Right click AC and create datasource
    u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    u2022 In general tab give short, medium, and long description.
    u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    u2022 In proposal tab load example data and verify it.
    u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    u2022 Activate data source and read preview data under preview tab.
    u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    u2022 In left panel select info provider
    u2022 Select created info area and right click to select Insert Characteristics as info provider
    u2022 Select required info object ( Ex : Employee ID)
    u2022 Under that info object select attributes
    u2022 Right click on attributes and select create transformation.
    u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    u2022 Activate created transformation
    u2022 Create Data transfer process (DTP) by right clicking the master data attributes
    u2022 In extraction tab specify extraction mode ( full)
    u2022 In update tab specify error handling ( request green)
    u2022 Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
    BW 7.0
    Uploading of Transaction data
    Log on to your SAP
    Transaction code RSA1u2014LEAD YOU TO MODELLING
    5. Creation of Info Objects
    u2022 In left panel select info object
    u2022 Create info area
    u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
    u2022 Create required info objects and Activate.
    6. Creation of Data Source
    u2022 In the left panel select data sources
    u2022 Create application component(AC)
    u2022 Right click AC and create datasource
    u2022 Specify data source name, source system, and data type ( Transaction data )
    u2022 In general tab give short, medium, and long description.
    u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    u2022 In proposal tab load example data and verify it.
    u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    u2022 Activate data source and read preview data under preview tab.
    u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    7. Creation of data targets
    u2022 In left panel select info provider
    u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
    u2022 Specify name fro the ODS or cube and click create
    u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
    u2022 Click Activate.
    u2022 Right click on ODS or Cube and select create transformation.
    u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    u2022 Activate created transformation
    u2022 Create Data transfer process (DTP) by right clicking the master data attributes
    u2022 In extraction tab specify extraction mode ( full)
    u2022 In update tab specify error handling ( request green)
    u2022 Activate DTP and in execute tab click execute button to load data in data targets.
    8. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
    Regards,
    ANI

  • How to create hierarchies in Bex queries?

    Hi All,
    I am new to query designer tool,
    can you please help me how to create hierarchies in Bex queries using query designer tool?
    Thanks in advance...

    Hi,
    directly you can't create hierarchy at bex level.
    First you have to maintain hierarchy data source at source or bw side, based on your needs.
    Later you can load data to hierarchy, after that at bex level you can activate hierarchy options to related info object properties.
    To maintain hierarchy we need to enable hierarchy options at related info object(RSD1, hierarchy tab, select with hierarchies) maintenance level.
    For example: info object - 0GL_ACCOUNT and you need hierarchy structure on gl account.
    For that we need to have hierarchy data source and will load data from ecc.
    Later we can develop reports on gl account in hierarchy fashion.
    On what object infoo bject you want create hierarchy report and have loaded hierarchy data?
    Thanks

  • Help - Step by Step Material on How to load Data from flatfile to BI 7.0

    Hi BI Experts,
    Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
    Thanks in Advance
    Regards
    Ramakrishna Kamurthy
    +91-9963101073

    1.     On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
    1.     You see the screen divided in two segments.
    2.     Follow the left segment.
    3.     Click on the Business Information Warehouse.
    4.     Sub Menu  BW Administration.
    5.     You find various entries in it.
    6.     Now double click on UG_BW_RSA1-Administrator Workbench
    2.     Creation of Info Area
    1.     Click on InfoObjects.
    2.     Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
    3.     A dialog box pops up.
    4.     Give the InfoArea as ZIVY_Iarea.
    5.     Give the Long Description as ZIVY Info Area.
    3.     Create a Catalog:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_CHCAT
                                                                  i.      Description = “ZIVY Character Catalog”
                                                                 ii.      InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
                                                                iii.      Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_CUST and
                                                                   i.      Description Customer Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CUST: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP  .
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_CUST, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_CITY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_CITY and
                                                                   i.     
    Description
    Customer
    City Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CITY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_STATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_STATE and
                                                                   i.     
    Description
    Customer
    State Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_STATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 25
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_CTRY
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_CTRY and
                                                                   i.      Description Customer Country Name.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_CTRY: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    1.     Creation of  Attributes and InfoObject from the ZIVY_CUST InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
    6.     You find the screen “Change Characteristic ZIVY_CUST:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_STATE, ZIVY_CTRY.
    11.     Now, we will create another InfoObject ZIVY_TEL, from here.
    12.     So type ZIVY_Tel and enter the ENTER KEY.
    13.     A dialog box pops up, and request you “If you want to Create an InfoObject”
    14.     Select “ Create Attribute As Characteristic” and click the check mark.
    15.     Another window pops up. Give the following:
                                                                   i.      In the General Tab:
    1.      Long Description: ZIVY Telephone Number
    2.      Short Description: ZIVY Telephone Number
    3.      DataType : NUMC
    4.      Length : 10
    5.      Uncheck Attribute Only
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data” and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”
                                                               iv.      Now click the “TICK MARK”
    1.      
    1.     Click the “ACTIVATE”
    2.     A window pops up.
                                                                   i.      Select “activate dependent InfoObjects.
                                                                 ii.      Click the Check Mark.
    1.     Creation of InfoObject: ZIVY_DATE
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_DATE and
                                                                   i.      Description ZIVY Date.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_DATE: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: DATS
    2.      Length: 8
                                                                 ii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
    2.     Create ZIVY Application Component:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Right click the mouse pointer and select the entry “Create Application Component”
    5.     A window pops up.
                                                                   i.      Application Component: ZIVY_APPCOMP
                                                                 ii.      Long Description : ZIVY Application Component
                                                                iii.      Click the check mark.
    1.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_CUST
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “Customer Info Object”.
    2.     Select the “Customer Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_CUST
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_CUST,
    3.      Second field is ZIVY_CITY.
    4.      And so on.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_CUST,
    4.      Third field is 0TXTMD.
    5.      Click the Transfer Rule adjacent to “0LANGUAGE”
    6.      A window pops up.
    a.       Check the “CONSTANT” and give the value as “EN”
    b.      Click the TICK MARK.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_CUST_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_CUST_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_ATTR”.
                                                                 ii.      Select “ZIVY_CUST_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_CUST” alias “Customer Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_CUST_TEXT”.
                                                                 ii.      Select “ZIVY_CUST_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_MAT and
                                                                   i.      Description ZIVY Material Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_MAT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_MAT, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_GROUP
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_GROUP and
                                                                   i.      Description ZIVY Material Group.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_GROUP: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”
    2.      Check the “With Texts” and make suitable Text Table Properties.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject: ZIVY_COLOR
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_COLOR and
                                                                   i.      Description ZIVY Material Color.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_COLOR: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 10
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Uncheck the “With Master Data”  and  “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
    2.     Creation of InfoObject from the ZIVY_MAT InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
    6.     You find the screen “Change Characteristic ZIVY_MAT:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Similarly, type ZIVY_COLOR.
    11.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_MAT
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Material Info Object”.
    2.     Select the “ZIVY Material  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_MAT
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_MAT,
    3.      Second field is ZIVY_GROUP.
    4.      Third field is ZIVY_COLOR.
    5.      Check the mapping. If you don’t see the mapping.
    6.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    7.      Type ZIVY_GROUP, ZIVY_COLOR.
    8.      Check the transfer rules.
    9.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_CUST MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_MAT,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_Material_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_Material_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_ATTR”.
                                                                 ii.      Select “ZIVY_MAT_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_MAT” alias “ZIVY Material Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_MAT_TEXT”.
                                                                 ii.      Select “ZIVY_MAT_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.         
    1.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_SPER and
                                                                   i.      Description ZIVY Sales Person Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SPER: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data” and “With Texts”.
    2.      Use suitable formats in the fields.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
                                                               iv.      In the Attributes Tab:
    1.      We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_SPER, by clicking the icon “ACTIVATE”
    2.     Creation of InfoObject: ZIVY_SREG
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_SREG and
                                                                   i.      Description ZIVY Sales Region.
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Change Characteristic ZIVY_SREG: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the General Tab
    1.      DataType: CHAR
    2.      Length: 20
                                                                 ii.      In the Master Data/ Texts Tab:
    1.      Check the “With Master Data”  and “With Texts”.
                                                                iii.      In the Hierarchy Tab:
    1.      Uncheck the “With Hierarchies”.
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
    2.     Creation of Attributes from the ZIVY_SPER InfoObject:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_CHCAT”,which is ZIVY  Character Catalog.
    5.     In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
    6.     You find the screen “Change Characteristic ZIVY_SPER:Detail”.
    7.     Click on the tab “Attributes”
    8.     In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
    9.     You see the relevant information regarding this being inserted.
    10.     Click the “ACTIVATE”
    3.     Create InfoSoure:
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Right click the mouse pointer and select the entry “Create InfoSource”
    6.     A window pops up:
                                                                   i.      Select the “Direct Update of Master Data”
                                                                 ii.      InfoObject : ZIVY_SPER
                                                                iii.      Click the CHECK MARK.
    1.      
    1.     Now beneath “ZIVY Application Component” you see the “ZIVY Sales Person Info Object”.
    2.     Select the “ZIVY Sales Person  Info Object” mentioned above.
    3.     Right click the mouse pointer, and select the entry “Assign DataSource”.
    4.     A window pops up.
                                                                   i.      InfoSource: ZIVY_SREP
                                                                 ii.      Source System: FLATFILE
                                                                iii.      Check the TICK MARK.
                                                               iv.      Just click yes for the coming window pop ups.
    1.      
    1.     Key thing
                                                                   i.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First field is ZIVY_SPER,
    3.      Second field is ZIVY_SREG.
    4.      Check the mapping. If you don’t see the mapping.
    5.      Click on the empty row in the group “Assign InfoObjectField”, the box to the right.
    6.      Check the transfer rules.
    7.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.                                                            ii.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                                iii.      Click the “Activate Button”. By clicking the “ACTIVATE BUTTON” you just activated the ZIVY_SREP MASTER DATA.
                                                               iv.      Now in DataSource : select the text.
                                                                 v.      Click on the tab “Transfer Rules”
    1.      Have a look at the data mapping here.
    2.      First Field : 0LANGUAGE
    3.      Second field is ZIVY_SPER,
    4.      Third field is 0TXTSH.
    5.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant.                                                          vi.      Click on the tab “DataSource/Transport Structure”1.      This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
    2.      If the order is different, just shuffle the rows.
                                                              vii.      Click the “Activate Button”. By clicking the “ACTIVATE.
    1.     Create the DATA required for this MASTER DATA
    1.     Open EXCEL.
    2.     Type the following data:
    1.      
    1.     Save as “ZIVY_SREP_MASTER.CSV”
    2.     The file should be saved in COMMA SEPARATED FORMAT.
    3.     Open EXCEL
    4.     Type the following data:
    5.     Save the file *** “ZIVY_SREP_TEXT.CSV”
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_ATTR”.
                                                                 ii.      Select “ZIVY_SPER_ATTR”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.      Browse the data.
    1.     Create InfoPackage
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoSource in the left hand segment.
    3.     In the right hand segment, select InfoSources.
    4.     Select the application component you created “ZIVY_APPCOMP” alias “ZIVY Application Component”.
    5.     Beneath this, you see “ZIVY_SPER” alias “ZIVY Sales Person Info Object”
    6.     Beneath this you see a “FLAT FILE”.
    7.     Select this “FLAT FILE”,  right click the mouse pointer and select the option “Create InfoPackage”.
    8.     A window pops up.
                                                                   i.      InfoPackage Description: Info package for “ZIVY_SPER_TEXT”.
                                                                 ii.      Select “ZIVY_SPER_TEXT”
                                                                iii.      Click the “CHECK MARK”
    1.      
    1.     You see a new screen “Scheduler (Maintain InfoPackage)”.
    2.     Click the tab “External Data”
                                                                   i.      Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
                                                                 ii.      Check the CSV file.
                                                                iii.      Click the Preview Button.
                                                               iv.      A window pops up, click the CHECK MARK.
                                                                 v.      You see the data present in the EXCEL File.
    1.      
    1.     Click the tab “Update”
                                                                   i.      Have a look at the entries.
    1.      
    1.     Click the tab: Scheduler:
                                                                   i.      Click the button “Start”
                                                                 ii.      You now click on “MONITOR BUTTON” present on the tool bar.
                                                                iii.     
    Browse the data.         
    1.     Creation of InfoObject Catalog with Key Figures:
    1.     Select the InfoArea just created “ZIVY_Iarea”.
    2.     Right click the mouse pointer and select the option “Create InfoObject Catalog” 
    3.     A dialog box pops up.
    4.     Give the InfoObjCat = ZIVY_KEYCAT
                                                                  i.      Description = “ZIVY Key Figures Catalog”
                                                                 ii.      InfoObjectType: Check the Key Figures.
                                                                iii.       Now at the bottom of this dialog box you see an icon called “CREATE”. Click this icon.
    1.      
    1.     The next screen in front of you is the “Edit InfoObject Catalog”.
    2.     Simply click the “activate” icon present on the Application Toolbar.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3.     Look for the InfoArea you created “ZIVY_Iarea”.
    4.     Select the catalog you created “ZIVY_KEYCAT”,which is ZIVY  Key Figures Catalog.
    5.     Right click your mouse pointer, and select Create InfoObject.
    6.     A dialog box pops up.
    7.     Give the Character ZIVY_AMT and
                                                                   i.      Description ZIVY Amount Info Object
                                                                 ii.      Click the TICK mark.
    1.      
    1.     The next screen you see is “Create Key Figure ZIVY_AMT: Detail”.
    2.     In this screen the following fields have to be modified:
                                                                   i.      In the Type/ Unit Tab
    1.      DataType: Amount
    2.      Unit/ Currency = 0Currency
    1.      
    1.     Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
    2.     Activate the ZIVY_AMT, by clicking the icon “ACTIVATE”.
    2.     Create InfoObject :
    1.     Go to the UG_BW_RSA1-Administrator Workbench.
    2.     Click on InfoObjects.
    3. 

Maybe you are looking for