How to load history into Recon accounts

Hi,
I would like to know how to load history (line items for 2 years) into the recon accounts for AR, AP, AA.
In our system, the recon accounts have been set in FS00 and there are some postings. So the accounts have some balancec in them. When I try to load it says I can not post directly to recon accounts.
Could some one help me with the procedure?
Regards,
-SD.

Hi,
You can't load directly.You have to load cusotmers or vendors balances to see balance in Recon accounts.
Thanks,
Rau

Similar Messages

How to load 0GLACCEXT into 0ACCOUNT

Hi,
can someone tell me how to load 0GLACCEXT into 0ACCOUNT? I have noticed that 0GLACCEXT is an attribute of OACCOUNT.
I am trying to use 0PCA_C01 for my queries.
Thanks
Zev

Hi Zev,
May be I'm wrong, but as far as I know 0GLACCEXT is an attribute of <b>0GL_</b>ACCOUNT an used for calculation in balance sheets (FI) and not for PCA.
Regards
Joe

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I am trying to download whatsapp on my iphone 4 when I hit the redeem button it shows I have $14.73 in my account, but asks for a code. I tried my itunes card code but it says it was already used. How can I tap into my account to pay for the app?

I am trying to download whatsapp on my iphone 4. It asks for my apple id and password and when I sign in , it gets me to a page that says redeem ...when I hit redeem it shows I have a $14 balance in my account and asks for a code - I tried entering the itunes card number...it says it has already been used. How do I tap into my account to pay for the app?

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

How can i log into my account if....

So I just got my own account yesterday and was wondering how could I log into my account. I did the process in store, I'm getting a new phone and I don't have a number yet and I didn't receive any information about my account. Does that mean I don't have one or do I need to contact someone to get it or do I have to wait until the phone come to set up an account ?

Account access is important in order to properly manage things. We can help you here. Is this for My Verizon? If it is, you will need a cellular number in order to get through the account creation. If it's not My Verizon, please tell us what it is so that we can help. Thank you.
BobbyN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How to load data into user tables using DIAPIs?

Hi,
I have created an user table using UserTablesMD object.
But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column.
Can somebody please help me with this?
I would appreciate if somebody can share their code in this regard.
Thank you,
Sudha

You can try this code:
Dim lRetCode As Long
Dim userTable As SAPbobsCOM.UserTable
userTable = pCompany.UserTables.Item("My_Table")
'First row in the @My_Table table
userTable.Code = "A1"
userTable.Name = "A.1"
userTable.UserFields.Fields.Item("U_1stF").Value = "First row value"
userTable.Add()
'Second row in the @My_Table table
userTable.Code = "A2"
userTable.Name = "A.2"
userTable.UserFields.Fields.Item("U_1stF").Value = "Second row value"
userTable.Add()
This way I have added 2 lines in my table.
Hope it helps
Trinidad.

How to load image into picturebox

Hi! Does anyone know how to load image into picturebox by using J2ME? And how to crete the picturebox in the forst place?
Thanks!
Regards,
Jaceline

You want java.awt.Toolkit.getImage() and java.awt.Graphics.drawImage().
Ted.

How to paste pictures into email account signature

How to paste pictures into email account signature. I cannot get the pic to be visible. I have an iPhone 6 Plus

I think I got it to working, IMbatman13folllowing the directions from that thread.
I created a signature on my laptop. Included a png in it.
Sent an email with that signature to myself on my iPhone. I did not put a message in the body.
Opened it up on iPhone. Selected entire 'body'. Copied all.
Went into Settings, Signatures, Selected a different email account, pasted in what I had copied.
And it worked.

HT201303 I forgot my security question answers. How do I get into my account?

I forgot my security question answers. How don I get into my account on a new device?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

How to load data into html:select using Struts ?

How to load data into <html:select> using Struts ?
I can not load an array or collection (static or dynamic data) into drop down list control by <html:select /> Struts.
please use:
<html:select >
<html:options />
</html:select >
Please help me. please detail it. thanks a lot.
Message was edited by:
tranminhman

In order to load a collection or array of data you can use <html:select> with <html: options collection="" name=""/>
here collection attribute refers to the Arraylist or Array of data and name is the name of the Form bean.
Hope this helps...
Chaitanya V

How do I get into an account that has an email address that doesn't exist anymore?

Some background info:
Over the course of a decade I have downloaded a lot of songs with a bunch of different accounts. This all started way before home sharing and iCloud and all that jazz. Anyways, I was in middle school, so my songs came off my mom's account (which was a bellsouth email address). Later when we switched to Comcast she started using her Comcast email address and we downloaded songs off of that. Then when we stopped with comcast she started using a new address, and at this point I was able to just buy my own music so I created my own account. I think my sister has one too, which adds to the chaos.
Anyways, now I'm trying to transfer my songs from my iPod to my laptop, and I've figured out most of the account passwords except for one: the bellsouth password. I tried to reset the Apple ID password but when I entered my mother's birthday is told me I was wrong. I tried my siblings', mine, and my father's to see if for some insane reason she didn't use hers, but none of them would be accepted. I then went to the AT&T website and tried to log in to that account so that I could access the account with one of those password change emails, but it wouldn't let me for similar reasons. Basically I'm not sure that that email account even exists anymore.
This is an extremely frustrating issue. The songs have been purchased and paid for; why is it impossible to get them to play? Surely there's an easier way than this nonsense.
INB4: You should have just used one account, you should have used home sharing, etc.
Yeah, okay, great advice, lemme hop in my TARDIS and fix that.
I'll be honest, I have no idea how home sharing even works and haven't bothered to learn because, honestly, what's the point if I can't even log into the accounts? I'm not even sure that the bellsouth one is the only other one.

Customer service can merge both of your accounts into a single one.
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

How to load data into read only cells in HFM?

Can any one help me in loading data into Read only cells in HFM?. I am trying to lad data into a read only cell using data load file and i m getting the below error.
NB: I need the "UseLineItem Details" to be enabled.I shud be able to submit the data thoudh the "UseLineItem Details" property of the account member is enabled
Data load File
!Column_Order = Scenario, Year, Period, View, Entity, Value, Account, ICP, Custom1, Custom2, Custom3, Custom4
!DATA
Actual; 2013; January; Periodic; NZ; NZD; 141100; [ICP None]; [None]; [None]; [None]; [None]; 10000
Error Received
Line: 4, Error: Cell for Period January is not an input cell.
Actual; 2013; January; Periodic; NZ; NZD; 141100; [ICP None]; [None]; [None]; [None]; [None]; 10000
>>>>>>
Can any one please help me ....

Hi,
Example: Assume that you have Travel Account#141100
Now you have below information
Travel Expenses $30,000
Food Expenses $50,000
Hotel expenses$20,000
To enter this details normally you will create additional 3 accounts(1.TravelExpenses 2.FoodExpenses 3.HotelExpenses) under Travel Account#141100
Using lineItem Details No need to create additional accounts. you can show the detailed information in a single cell(Single Account).
To do this
1.Create a New datagrid in workspace
2.Right-click and select Cell Line Item Detail on Account#141100 (which is enabled line item details)
3.Click on add button then provide the description and Enter the amount then press enter.
1)Travel Expenses $30,000
2)Food Expenses $50,000
3)Hotel expenses$20,000
4.Total $100,000 will be shown in Account#141100
(If you want to see the detailed information just Right-click and select Cell Line Item Detail on Account#141100)
To get clear understanding please go through the HFM Admin guide.
Regards
Sarilla

How to load fonts into iPad?

Can anyone offer help/referral on how to load custom fonts into the iPad? Thanks

there are no fonts but go to setting/general/keyboard/keyboards/ and choose your keyboards

How can I pay into my account. What is gift card number and Pin

How do I put money into my account so that my purchases will go through? What is gift card and it's Pin

http://support.apple.com/kb/HT2736

How to load 0XF0 into 1 byte ?

Hi all,
I am creating an array like this...
private final static byte[] PSA325_ERR240_FAIL = {0x7e,0x0,0x1,0x5,0x1,0x0,0x0,0x0,0x1,0x0,0x0,0x0,0x1,(byte)0x82,
(byte)0XF0,0x7e};
its a 16 byte array...
in the last but one byte which is 0xF0
I want a value of 0xF0 i.e 240 to go in there....but if I don't cast it to a byte...I am not able to compile and if I am casting it to byte then it is going as -16 which I don't want..
I want the value to go as 0XF0 or as 240....let me know if anyone knows the solution...
all I want is how do I load a value of
240 i.e 0XF0 in just one byte...???
pls help!!!
Satish

Hi,
I am clear to come extent but still not very clear as to how will I load 0xF0 into one of the indexes in the byte array..
I mean if u look at my problem
I want to load 0xF0 into one of the elements of the byte array...and if I am trying to load it as 0xFO the compilor doesnt accept as it is an int ..so I am casting it to byte..but ur solution of & it with 0XFF is not pocssible to in my case as
again I cant use some tjhing like
private final static byte[] PSA325_ERR240_FAIL = {0x7e,0x0,0x1,0x5,0x1,0x0,0x0,0x0,0x1,0x0,0x0,0x0,0x1,(byte)0x82,((byte)0xF0 & 0xFF),0x7e};
as here again 0XFF is an int and cant be loaded into a byte array as an element....hope i have not confused you much..if u are clear..then please let me know the solution...
my requirement is
private final static byte[] PSA325_ERR240_FAIL = {0x7e,0x0,0x1,0x5,0x1,0x0,0x0,0x0,0x1,0x0,0x0,0x0,0x1,(byte)0x82,0xF0,0x7e}; in the last but one byte 0XF0 should go in and not as -16...how di I do it ?
Satish

How to load history into Recon accounts

Similar Messages

Maybe you are looking for