How to load masterdata in BI 7.0
Hi experts,
I look for "How to.." about masterdataloading. Can samebody help me?
Thanks
hi
create characteristic,key figures (in info objects) etc..u want -> check on master data in master data tab of the characteristic which you want to make as master data -> insert attributes of master data in attributes tab
create info source ->create transfer rules -> activate.
in info provider -> click on master data(right click)->create update rules->activate.
create infopackage on the last node(DS)->fill in the target on right,other details etc.. and schedule...
hope it helps..
cheers.
Message was edited by:
tarun bafna
Similar Messages
-
Hi Experts & Friends,
Could you please tell me step by step to Load Masterdata Object for the zcustomer the source could be 0customer_attr.
I would be highly appriciate if someone give me the steps.
Thanks & Regards
SiriHi Siri,
Initially activate the 0customer_attr in source system.
Replicate the data source.
Create infosource for the data source.
map the fields in transfer rules activate.
Create update rules for zcustomer.
Assign the infosource.
create infopackage.
Schedule.
Also Refer:
BI-7 process:
/thread/732517 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
Rgs,
I.R.K -
Lock NOT set for loading masterdata/attributes - already locked
Dear all,
I've searched this forum for similar topics bu couldn't find a solution yet
I'm loading masterdata for 0PERSON but an error appears stating' Master data table or text table already locked'.
I've checked if there is an attribute change run active but there isn't anything, I've executed all of them where necessary.
Transaction RSRV is not showing problems for the info object (No SIDS missing etc)
There are no locked records in SM12/SR12.
I've tried to reload the infopackage and run the DTP again but without success.
Please advice how to unlock the table.
Regards
MarkusHi,
Just check following
1. Whether there is any active job in SM37 for loading this master data ,if anything triggered manually
2. Check whether any R/3 job is active for this master data
3. Check whether any attribute change run job is active
4. Check whether any roll up /BIA job is running
5. Check consistency of table in SE14 and RSRV for master data
6. Try to manually activate and see if same error is coming?
Also check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0869e29-1405-2e10-27be-db1dad7703c5?QuickLink=index&overridelayout=true
Thanks and regards -
How to load a Jar file in the class path?
How to load a Jar file which contains class files, images, etc.. in the classpath without using URLClassLoader.
You don't "load" jars. If it's on the classpath, you can obtain individual resources from it using various methods on either Class or ClassLoader. Do you mean "how to add a jar to the classpath at runtime"? Can't be done without using a classloader, typically URLClassLoader or a subclass thereof. Why you want to not use the proven method is beyond me. Presumably because you don't understand classloading. In which case, forget it.
-
How to load a client file in a clob using sqlcl
How to load a client file in a clob using sqlcl
You don't "load" jars. If it's on the classpath, you can obtain individual resources from it using various methods on either Class or ClassLoader. Do you mean "how to add a jar to the classpath at runtime"? Can't be done without using a classloader, typically URLClassLoader or a subclass thereof. Why you want to not use the proven method is beyond me. Presumably because you don't understand classloading. In which case, forget it.
-
How to load data to a cube from multiple infosources ?
Hi friends,
How to load data to a cube from multiple infosources ? could u please answer this question .
thanks in advance......Hi ,
say for example you need to load data to 1 cube from 3 info sources:
1) You need to create 3 update rules for the Cube.
2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
Regards
satish
Message was edited by:
satish murthy -
Hi :
How to load beginning balance to repective g/l account in SAP?If you want to load balances at the time of go live.
Create a clearing account like data take over A/c
MM will upload material balances using tcode MB1C and movement type 561
it will generate the following accounting entry
Finished goods stock a/c Debit
Semi-Finished goods stock a/c Debit
Raw Material stock a/c Debit
Packing Material stock a/c Debit
Stores and spares a/c Debit
Data take over Credit
Customer a/c (not recon G/l) Debit
Data takeover a/c Credit
Data takeover a/c Debit
Vendor a/c (not recon GL) Credit
For Asset - tcode OASV
Plant and Machinery a/c Dr
Accumulated depreciation a/c Credit
Data takeover a/c Credit
Cash balance through FBCJ
G/L Tcode F-02,
Data takeover a/c Debit (Balancing figure)
Bank a/c Debit
Advances Debit
Share capital a/c Credit
Short term Loan a/c Credit
Long term loan a/c Credit -
How to load a selective request from PSA to DSO using DTP?
Hi Gurus,
The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
Thanks
SDP
Edited by: SDPSAP on Nov 15, 2011 7:58 PMLet us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
- create a Delta DTP
- Tick "Only Get Delta Once"
- Tick "Get One Request Only"
- Untick "Reterive Until No More New Data"
- execute the DTP, it will load request 1 to DSO
- delete this request from DTP
- execute DTP again, it will load request 2 to DSO; this is what you need.
If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
I hope it helps.
Regards,
Gaurav -
How to load and unload more than one external swf files in different frames?
I do not have much experience on Adobe Flash or Action Script 3, but I know the basics.
I am Arabic language teacher, and I design an application to teach Arabic, I just would like to learn how to load and unload more than one external swf files in different frames.
ThanksLook into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.
-
How to load site in a reinstalled Dreamweaver
Hello,
I had to move from a desktop PC to a laptop. I had to install
Studio 8 all over again and I have all the files I was using
earlier in my desktop.
When starting Dreamveaver I can see the folder structure in
"files/assets/snippets" but I don't know how to load the main
folder where my work is stored. (Where was doing my work earlier in
the desktop)
Example:
I was working with a site named A. This is a folder named "A
" that should appear under the "files/assets/snippets" window.
All I see after the reinstall is the Desktop and all the
folders in my HD along with the folder that I was working with.
The "Manage Sites" small window is blank right now.
How do I place the folder (site?) "A" back in the
"Files/Assets/Snippets" column so I can open my HTML's already
created, access the icons and other folders below "A" ?
thank you
pakoppan"> The "Manage Sites" small window is blank right now.
Did you export your site definitions to a folder that you
could move by FTP
or portable device to the laptop? If so, all you need to do
is import the
site definitions and make sure your folder structure is
identical to your
other computer.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development -
How to load the content in Combobox
Dear All,
Any one can tell me how to load the combobox dynamically.. i have one combobox in that i defined the value as "Defined New" when i click the DefineNew a new form wil come i wil enter the value in the editext. when i click the combobox the value should display.. i have done this, its working fine but the problem is every time when i add the value it wil show the data in the the form Load.. i want data should come dynamically..
any one can help me in this regard
G.shankarYou can use this "oForm.Refresh()" every time you add a new valid value to the ComboBox.
I hope this help you.
Regards.
Enriquillo Guigni -
Can anyone tell me how to load my music library from my PC down to my IPad??
Some how when I updated the OS on my IPad I lost all my music in the IPOD section. I would like to find out how to load my music library from my PC to my IPad? Thanks.
If you use iTunes See Here
Syncing with iTunes
From Here
http://www.apple.com/support/ipad/syncing/
Ipad User Guide
http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf -
Can someone tell me how I load my music from my itunes account onto my new macbook pro??
can someone tell me how to load my music from my itunes account on my iphone to my new macbook pro?
See Here
iTunes: How to move your music to a new computer -
My friend synced a video to my ipod but it earased all my data on my ipod,but I can't figure out how to load my old library back without deleting the movie. My friend shares a family account so she can't tell me the password. How can i get my old library back without deleting the movie?
Linnwarner wrote:
She does have the right because she bought the movie.
Not true at all.
You only buy the right to your own personal use.
You do NOT have the right to distribute to others.
This is illegal. There is no doubt about it -
How To Load a Project Budget Line Through API in R12 ?
Hello
Could you please let me know how to load the project budget lines through API in R12 system, I am trying with below script but it is not working.
Could you please let me know if you have any solution.
=========================================================================================================================================================================
Script
DECLARE
--––variables needed for API standard parameters
l_api_version_number NUMBER := 1.0;
l_commit VARCHAR2 (1) := 'T';
l_return_status VARCHAR2 (1);
l_init_msg_list VARCHAR2 (1);
l_msg_count NUMBER;
l_msg_data VARCHAR2 (2000);
l_data VARCHAR2 (2000);
l_msg_entity VARCHAR2 (100);
l_msg_entity_index NUMBER;
l_msg_index NUMBER;
l_msg_index_out NUMBER;
l_encoded VARCHAR2 (1);
i NUMBER;
a NUMBER;
--––variables needed for Oracle Project specific parameters
l_pm_product_code VARCHAR2 (100);
l_pa_project_id NUMBER;
l_pm_project_reference VARCHAR2 (100);
l_budget_type_code VARCHAR2 (30);
l_change_reason_code VARCHAR2 (30);
l_description VARCHAR2 (255);
l_entry_method_code VARCHAR2 (30);
l_resource_list_name VARCHAR2 (60);
l_resource_list_id NUMBER;
l_budget_lines_in pa_budget_pub.budget_line_in_tbl_type;
l_budget_lines_in_rec pa_budget_pub.budget_line_in_rec_type;
l_budget_lines_out pa_budget_pub.budget_line_out_tbl_type;
l_line_index NUMBER;
l_line_return_status VARCHAR2 (1);
l_user_id NUMBER;
l_responsibility_id NUMBER;
API_ERROR EXCEPTION;
BEGIN
-- SET GLOBAL INFO
SELECT user_id,
responsibility_id
INTO l_user_id,
l_responsibility_id
FROM pa_user_resp_v
WHERE user_name = 'RAJU';
PA_INTERFACE_UTILS_PUB.SET_GLOBAL_INFO (p_api_version_number => 1.0,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status
IF l_return_status != 'S'
THEN
RAISE API_ERROR;
END IF;
--––PRODUCT RELATED DATA
l_pm_product_code := 'GMS';
--––BUDGET DATA
l_pa_project_id := 6271;
l_pm_project_reference := NULL;--'ABC';
l_budget_type_code := 'FC';
-- l_change_reason_code := 'INITIAL';
l_description := 'New description –> 2';
l_entry_method_code := 'PA_TASKLVL_BASELINE';
l_resource_list_id := 1001;
--––BUDGET LINES DATA
a := 1;
FOR i IN 1 .. a
LOOP
l_budget_lines_in_rec.pa_task_id := 405156;
l_budget_lines_in_rec.pm_task_reference := NULL;
l_budget_lines_in_rec.resource_alias := 'Labor';
l_budget_lines_in_rec.resource_list_member_id := '1034';
-- l_budget_lines_in_rec.budget_start_date := '01-Jan-13';
-- l_budget_lines_in_rec.budget_end_date := '31-Dec-14';
-- l_budget_lines_in_rec.period_name := 'JUL-10FY2011';
l_budget_lines_in_rec.description := 'Some Text';
l_budget_lines_in_rec.quantity := 100.00;
l_budget_lines_in_rec.raw_cost := 300.00;
l_budget_lines_in (i) := l_budget_lines_in_rec;
END LOOP;
--––INIT_BUDGET
pa_budget_pub.init_budget;
--––LOAD_BUDGET_LINE
FOR i IN 1 .. a
LOOP
pa_budget_pub.load_budget_line
(p_api_version_number => l_api_version_number,
p_return_status => l_return_status,
p_pa_task_id => l_budget_lines_in (i).pa_task_id,
p_pm_task_reference => l_budget_lines_in (i).pm_task_reference,
p_resource_alias => l_budget_lines_in (i).resource_alias,
p_resource_list_member_id => l_budget_lines_in (i).resource_list_member_id,
p_budget_start_date => l_budget_lines_in (i).budget_start_date,
p_budget_end_date => l_budget_lines_in (i).budget_end_date,
p_period_name => l_budget_lines_in (i).period_name,
p_description => l_budget_lines_in (i).description,
p_raw_cost => l_budget_lines_in (i).raw_cost,
p_burdened_cost => l_budget_lines_in (i).burdened_cost,
p_revenue => l_budget_lines_in (i).revenue,
p_quantity => l_budget_lines_in (i).quantity
END LOOP;
IF l_return_status != 'S'
THEN
RAISE api_error;
END IF;
--––EXECUTE_CREATE_DRAFT_BUDGET
pa_budget_pub.execute_create_draft_budget (p_api_version_number => l_api_version_number,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_pm_product_code => l_pm_product_code,
p_pa_project_id => l_pa_project_id,
p_pm_project_reference => l_pm_project_reference,
p_budget_type_code => l_budget_type_code,
p_change_reason_code => l_change_reason_code,
p_description => l_description,
p_entry_method_code => l_entry_method_code,
p_resource_list_name => l_resource_list_name,
p_resource_list_id => l_resource_list_id
IF l_return_status != 'S'
THEN
NULL; --––RAISE API_ERROR;
END IF;
--––FETCH_LINE
FOR l_line_index IN 1 .. pa_budget_pub.g_budget_lines_tbl_count
LOOP
pa_budget_pub.fetch_budget_line (p_api_version_number => l_api_version_number,
p_return_status => l_return_status,
p_line_index => l_line_index,
p_line_return_status => l_line_return_status
IF l_return_status != 'S' OR l_line_return_status != 'S'
THEN
RAISE api_error;
END IF;
END LOOP;
--––CLEAR_BUDGET
pa_budget_pub.clear_budget;
IF l_return_status != 'S'
THEN
RAISE api_error;
END IF;
--––HANDLE EXCEPTIONS
EXCEPTION
WHEN api_error
THEN
FOR i IN 1 .. l_msg_count
LOOP
pa_interface_utils_pub.get_messages (p_msg_data => l_msg_data,
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out
DBMS_OUTPUT.put_line ('Error Mesg ' || l_data);
DBMS_OUTPUT.put_line ('Error Mesg ' || l_msg_data);
END LOOP;
WHEN OTHERS
THEN
FOR i IN 1 .. l_msg_count
LOOP
pa_interface_utils_pub.get_messages (p_msg_data => l_msg_data,
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out
DBMS_OUTPUT.put_line ('error mesg ' || l_data);
END LOOP;
END;
=========================================================================================================================================================================Not knowing how its embedded... you will need to get the report instance from the dll and cast it as a ReportDocument object.
Given the info so far, that is all we can say.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Maybe you are looking for
-
Lightroom 5.7 Imports Photos Out of Sequence
Since updating to Lightroom 5.7 photos are imported out of sequence. They are in the correct sequence when the card is read but during import they are scrambled, for example: importing five photos in order A, B, C, D and E but the sequence after imp
-
Problem in Installation of Oracle Universal Content Management
Hello friends I am Nilesh ,trying to install Oracle UCM on Windows Server 2003. For this I used MS SQL Server 2005 as Database & IIS as Web server. This is giving Error of Connection of UCM & Database. Can you please guide me in installing UCM ?. I a
-
SharedObjects environment value not updating properly in clustered environment
Hi All, I have clustered UCM having two nodes. I have custom scheduler running every 5 minutes which updates some value in SharedObjects environment. I am using following code: SharedObjects.putEnvironmentValue("param", "val"); the problem is that th
-
Error When using Element level link in Dataset Joins
Hi All , I am joining two data sets using element level link ,I am getting the following Error message ORA-00972: identifier is too long at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462) at oracle.jdbc.driver.T4CTTIoer.processError(T4C
-
Unreadable text in Safari after installing Lion
After installing Lion, some web pages in Safari are impossible to read, all letters appear as capital A in a frame. What is that?