How to load purchase text

Hi I want to load multiple purchase text of material master data,it looks like there is no way to load with lsmw? Could you advise?

Hi,
In BDC:-
Re: Uploading sales text and Purchase order text for material master
http://wiki.sdn.sap.com/wiki/display/ABAP/MaterialMasterUpload+Program
http://wiki.sdn.sap.com/wiki/display/Snippets/BDCProgramtoUploadMaterialMasterData+(MM01)
pherasath

Similar Messages

"how to load a text file to oracle table"

hi to all
can anybody help me "how to load a text file to oracle table", this is first time i am doing, plz give me steps.
Regards
MKhaleel

Usage: SQLLOAD keyword=value [,keyword=value,...]
Valid Keywords:
userid -- ORACLE username/password
control -- Control file name
log -- Log file name
bad -- Bad file name
data -- Data file name
discard -- Discard file name
discardmax -- Number of discards to allow (Default all)
skip -- Number of logical records to skip (Default 0)
load -- Number of logical records to load (Default all)
errors -- Number of errors to allow (Default 50)
rows -- Number of rows in conventional path bind array or between direct path data saves (Default: Conventional path 64, Direct path all)
bindsize -- Size of conventional path bind array in bytes (Default 256000)
silent -- Suppress messages during run (header, feedback, errors, discards, partitions)
direct -- use direct path (Default FALSE)
parfile -- parameter file: name of file that contains parameter specifications
parallel -- do parallel load (Default FALSE)
file -- File to allocate extents from
skip_unusable_indexes -- disallow/allow unusable indexes or index partitions (Default FALSE)
skip_index_maintenance -- do not maintain indexes, mark affected indexes as unusable (Default FALSE)
commit_discontinued -- commit loaded rows when load is discontinued (Default FALSE)
readsize -- Size of Read buffer (Default 1048576)
external_table -- use external table for load; NOT_USED, GENERATE_ONLY, EXECUTE
(Default NOT_USED)
columnarrayrows -- Number of rows for direct path column array (Default 5000)
streamsize -- Size of direct path stream buffer in bytes (Default 256000)
multithreading -- use multithreading in direct path
resumable -- enable or disable resumable for current session (Default FALSE)
resumable_name -- text string to help identify resumable statement
resumable_timeout -- wait time (in seconds) for RESUMABLE (Default 7200)
PLEASE NOTE: Command-line parameters may be specified either by position or by keywords. An example of the former case is 'sqlldr scott/tiger foo'; an example of the latter is 'sqlldr control=foo userid=scott/tiger'. One may specify parameters by position before but not after parameters specified by keywords. For example, 'sqlldr scott/tiger control=foo logfile=log' is allowed, but 'sqlldr scott/tiger control=foo log' is not, even though the position of the parameter 'log' is correct.
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\PFS2004.CTL LOG=D:\PFS2004.LOG BAD=D:\PFS2004.BAD DATA=D:\PFS2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\CLAB2004.CTL LOG=D:\CLAB2004.LOG BAD=D:\CLAB2004.BAD DATA=D:\CLAB2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CTL LOG=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.LOG BAD=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.BAD DATA=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CSV

I have enhanced standard master datasource , How to load the Text for it?

Hi Experts,
I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
Can any one help how to load the text for the enhanced attribute?
Thanks in advance
Ganesh Kumar

Hi Tony,
Loaded the 0MATERIAL_TEXT ,also sucessful.
After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
Can you tell me how to load the text data to the newly enhanced attribute???

How to load Cell Text (~8000 bytes) in HFM from a Flat File using FDMEE?

Hi,
There are numerous posts on OTN describing how to load cell text using the Create Memo API. However, we are struggling to know how do we use FDMEE to load Cell text which is about 8000 bytes from a flat file?
Basically HFM gives us the flexibility to enter a Free-Form Cell Text with default size of 8000 bytes (which may be increased). However, when we try to manupilate FDMEE and load this to HFM, there is no place-holder/column in FDMEE Staging tables that has sufficient size to place such a long text. All the ATTR are not more than 20 bytes and UDx columns are only 75 bytes.
Has anyone faced a similar issue and built a workaround for this problem?
Thanks!

Did you consider External Tables ?

How to load long text in BOM line item

Hello Experts
How do i load Long text in BOM Line item using LSMW
Thanks
S
Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PM

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to load external text file into a Form?

Hi,
I made a menu with 1-5 in a Form and 5 external text files. I want the user who is able to view the text content of the text file when he chooses one of them from the menu. And the text file screen has a "Back" command button to let him go back.
How can I do it and can it support other languages such as Chinese and Japanese?
Thanks for help.
gogo

Sorry, I made the mistake about the subject, it should be loading local file, not external file through http.
I wrote a method but it throwed an exception when the midlet was run.
private void loadText()
try {
InputStream is = this.getClass().getResourceAsStream("/text.txt");
StringBuffer sb = new StringBuffer();
int chr;
while ((chr = is.read()) != -1)
sb.append((char) chr);
is.close();
catch (Exception e)
System.out.println("Error occurs while reading file");
I put the text.txt file in the same folder with the main file (extends midlet). How can I load the text content and display it on StringItem?
Thanks for any help.
gogo

How to load the text to Masster data

Hi Experts,
I am not able to load the text for master data.
We have postal code(0POSTALCODE) Master data InfoObject , in this we have field called Prizm, it's 'Z' field (ZPRIZM).
I would like to load the description for this filed(text), for example we have 1 to 50 prizm code,for all the call the prizm code I need to add the description.
Postal code master data has flat file data load and it has attribute but not the text.
Can anyone help me out in this.
Thanks

Hi Arjun,
Thanks for your help.
ZPRIZM is attribute of Postal code master data InfoObject , As you advice to click on With Text check box, I clicked on that I am able to see the text table name as /BI0/TPOSTALCODE but When I am checking the object, I am getting the warning message.
Transformation 0JW11FEHO1HRHUAK72BKYP5EWGH4LG1M set to inactive
Transformation 0OZRWMNV3LOPRBSF0PN2OB0EUKYDGV4L set to inactive
Could you please let me know how can I proceed.
Thanks
Chetan

How to load some text from properties file ?

Hi again,
problem is i dont know how can i load a text from properties file like #{xxx['key']} in managed bean, i tried to find some solution but havent seen this kind of use this file in java code. Is it supposed to work only for labels in jspx pages ?
thanks for help ...

Hi,
a managed bean is nothing special from any other Java file. However, if you look at SRDemo, you find a nice way of using the same message bundle that you use on the page
See the messageFromBundle() method in the JSFUtils class of the UserInterface project
Frank
P.s. You can download and setup SRDemo from JDeveloper help--> check for updates

How to load a text file?

I'm trying to load a text file and I've run into a wall. So
far, I've loaded swf files, image files and XML files without
problems. But the text files just don't seem to load.
It's not a tough situation. The files are in the same
directory as the application. When I run it, I see no sign that the
file has loaded, but haven't found the error trapping to tell me
what is (not) going on.
The code below was culled from examples on the web, they seem
fairly consistent, and they are copied pretty much exactly. and I
put them both into a single action to test them.
Any clues as to what is not happening? I need to read an old
txt data file that was used with AS2, with pairs of names and
variables. The first example just reads a couple of variables. The
second just reads some random text. I'm just trying to see what
works here, so I can incorporate working code into the real
program.
Thanks for your help.

Thanks Joergen,
I put in the changes you suggested and still no sign that the
files are even being opened., but it's very good to have the
feedback. Just the fact that someone is getting them to run gives
me confidence in the basic code. I'll hack on it more and let you
know what the answer turns out to be for me.
Thanks.

How to load a text file int JEditorPane and highlight some words (Urgent !)

I want to load a text file into a JEditorPane and then highlights some keywords such as while,if and else.I am using an EditorKit in order to style the JEditorPane. I have no difficulty while giving the input through the keyboard but lots of exceptions are thrown if i try to load the string from a file.

Hi,
I think the setCharacterAttributes(int offset, int length, AttributeSet s, boolean replace) will solve the problem.
You can create your own Styled Document and set it to the Editor Pane.

How to load cell text (cell comment) information in Planning

Hi All,
My client is moving from an old budgeting system to Hyperion planning as their budgeting tool. Thats why they want to load the historical budgeting data from the old system to Hyperion planning. One of their requirement is to load historical cell comments from old system to Hyperion Planning. They will be providing us the intersections as well as the cell comment in excel/csv file. I am just wondering how to load that information in one go from excel to hyperion planning. Is there any way to do that. Please help.
Regards
Arijit

Planning backend has HSP_CELL_NOTE, HSP_CELL_NOTE_ITEM tables. By using objectIds for the intersections from the file you can automate insertion of rows into these tables and at the end recycle the planning service.
Hope it helps
Krishna

How to load dynamic text inside a movie clip?

hello all - i have a main stage where on the first frame my
"home" movie clip displays. i did this by dragging/dropping, and
then i put a stop action. all works fine.
inside this home movie clip on the main stage, there are
links to other movie clips. for example, to get to my faq's page -
you click that button, then it takes you to frame 4 on my main
stage, where my faq's movie clip (followed by stop action) has been
dragged/dropped and displays properly.
within the faq's movie clip this process is repeated, with
buttons taking to you various pages (different frames where
different movie clips play - all works fine).
so now i want to add a dynamic text field within my faq's
movie clip. i have read numerous tutorials where i have created the
text file but i have not been able to display it with success
within my faqs movie clip.
here is some code that my dvd tutorial instructs me to place
on main stage as i practice getting this to work:
var myMCL:MovieClipLoader = new MovieClipLoader ();
var myListener:Object = new Object();
myMCL.addListener(myListener);
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success:Boolean) {
if (success) {
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "There has been an error loading
the requested information. Please contact the webmaster.";
and here is some code that i place on the faqs button within
my main movie clip that takes me back to main stage and plays faq
movie clip all successfully:
on (release) {
//Movieclip GotoAndPlay Behavior
_root.gotoAndPlay("4");
//End Behavior
and finally, here is some code that i place within my faqs
movie clip in an attempt to display my dynamic text within the faqs
movie clip - so far unsuccessful:
_level0.myLV.load("vars/faqs.txt");
NOTE:
i have published this to view - not working.
i have my faqs text file starting as info=
i have eliminated white space within my text file
i am using flash 8 pro
can anyone offer some sugestions? thanks!

hmmmmm lemme double check as i seem to be a bit lost now.
// this is my actions layer code on frame 4 of main timeline:
stop();
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success:Boolean) {
if (success) {
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "There has been an error loading
the requested information. Please contact the webmaster.";
myLV.load("vars/faqs.txt");
1. fyi - at frame 4 on main timeline, one layer beneath the
actions layer where i dragged/dropped my faqs movie clip i gave my
faqs movie clip an instance name of "mainfaqs" - although nowhere
do i refer to this specific mc within my code.
2. where would i replace/insert the following code?
_level0.faq_mc.loadedInfo.text = myLV.info;
3. i didn't know about embedding font but i saw the option
and embedded it - still no results.
4. i'm not sure how to do the following:
_level5.loadedInfo.text ='test'; //although I would still
change the path as above
To see if your getting a return from the load call adn text
file, use a trace statment before the success condition and see
what it returns:
trace(myLV);
sorry to be such a pain - i really have looked around for
answers through previous postings and i googled it and i've been
taking instruction through lynda.com and dvds but i seem to be
stuck here.... as always - thanks for your time

How to load a text file (ASCII) into a TS string variable?

I need to load a ASCII file into a TS string variable for subsequent processing. I tried the SecuenceBuilder DLL (in the examples directory) but it seems that this DLL has a bug. Some text files are not loaded properly. I have also tried the kernel32 functions (openfile, createfile, readfile ... ) handling them as a C program, but with no success. The property loader feature of TS is not the suitable solution for me, because I would have to modify all my text files to include some specific fields (step name, variables, starmarker ...). Doy you know an alternative procedure to load text files or any DLL that implements what I look for ? Any help would be grateful. Cesar ([email protected])

Hi Cesar,
I don't know if you have found a solution, but attached is a DLL built in VC that will read the text out of a file into a TestStand variable. The attached sequence file \SequenceFile1.seq contains a step type that is set to call the DLL responsible for reading the file. It reads the file specified under Step.FilePath and stores the data in Step.ReadData. Please let me know if this works for you. I have attached the source as well.
Regards,
Bob
Attachments:
ReadFile.zip ‏3628 KB

How to load a text file in a Java swings application

hi,
I am trying to retrieve a Java code(or say any text from an existing file) and display it in a swing application.
I am not able to do so.
Please help me.

public String readFile(File f){
          try {
               BufferedReader read = new BufferedReader(new FileReader(f));
               String line = read.readLine();
               String total = "";
               while(line != null){
          //          System.out.println(line);
                    total += line;
                    line = read.readLine();
               read.close();
               return total;
          } catch (Exception e){
               e.printStackTrace();
          return "";
     }that will read a file into a string, i hope you can figure out the rest

How to create generic text datasource to load text data?

met issue in generic master data load
Hi,
please see above link for detail infomation regarding the attribute data load. now the language and description column of the infoobject s_saled is empty. i need to create a generic text datasource to load data from R3 to BW. the table which i use to extract attribute data is VBAK, but i don't find any filed relate to language and description.
met issue in generic master data load
can anyone tell me how to load the text data?
thanks very much.
Eileen

hi eileen,
go to transactio rso2 in your source system ie r/3.
there u have three three fields for transaction data
attributes.
text.
choose text and proceed as u did for trancsaction data load.
thank u,
reward if helpful.

How to load purchase text

Similar Messages

Maybe you are looking for