How to load request by request from DSO to Cube
Hi All,
I am loading the data from DSO to Cube. In DSO each request has some 50 lakhs records. When I give execute in the cube transformation after some time it is giving timout error(Basis have set the time till 25 min) and I gave one more option in DTP get all new data request by request but this option also not getting the proper data. Again I am getting the time error.
If anyone knows any other option please let me know.
Thanks for your help in advance
Regards
Sathiya
Hi,
You can load on the criteria of key fields in the DSO.
Or selecting Fiscal periods may help.
Hope this helps,
Regards,
anil
Similar Messages
-
How to delete a single request from DSO in BI 7.0
Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
PrathapIN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk -
Delete overlapping requests from DSO
Hi Everyone!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is one, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.
Does anyone have any idea?
Thanks in advance.
EduardoHi..
How could you do that since DSO has the overwrite property? For example you are loading from DSO1 or DS to DSO2.
If u ran a load that goes into DSO2. If u ran same load again it goes into DSO 2 and overwrites the previous request. for that u can verify with display data.
Is ur DSO additing the records????
Delete Overlapping Requests Only for Info cubes.
I request you to post the exact issue so that we can assist you better.
Regards....KP -
Deleting overlapping request from DSO
Hi there!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is a step, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.Hi Shanthi,
I tried using info package but still req havnt delete from info cube.
It works for DTP as i can see many DTPs in list but not mine thats the issue.
Thanks from your responce. Hoping for any new suggestion.
i cant manually delete req from production as process chain runs at mid night. -
Error while deleting request from DSO: S:RSODSO_ROLLBACK:259
Hi,
While deleting request from DSO, we face following errors:
S:RSODSO_ROLLBACK:259 129 transaction rolled back by an internal error: fail
Message no. RSODSO_ROLLBACK259
Job is getting completed with message:
Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
<Message short text RSODSO_ROLLBACK 259 does not exist>
Parallel processes (for Rollback); 000003
Timeout for parallel process (for Rollback): 000600
Package size (for Rollback): Dependent on Activation
Task handling (for Rollback): Backgr Process
Server group (for Rollback): No Server Group Configured
Job finished
FYI:
Kindly help us to resolve the error.
Regards,
Antony Jerald.Hi Dinesh,
Thanks for your reply.
We have Netweaver 7.30 with BW on hana on SP 9.
First 3 SAP notes doesn't meets the need.
Shall I use 1007717 note?
Which says:
use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
Will it resolves the problem?
Kindly suggest.
Regards,
Antony Jerald. -
Problem in deleting a request from Dso
Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PTHi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy. -
Recover deleted requests from DSO
Hello BI Experts,
We have been deleted requests from standard DSO accidentally. The data has been deleleted for 3yrs and we have been trying to recover from Reconstruction tab but could not found anything there.
Can any body tell me how to recover recover deleted requests from DSO? I would really appreciate your great help.
Thanks in advance,
Regards,
VenkatHI BI Experts,
When we personalize Query language to another language in the SAP Portal, the variable selection fields are not displaying with description and they are displaying in the technical name.
Example: Opened BI report from the SAP Portal and selected Personalized settings, from there selected Portal language as French. when I selected French language, the vaiable selection screen field names started appearing with technical field name in the French language but it should display the field description not the technical name.
I hope you understand my question.
End user does not understand the technical names when they have selected personal language. Can any body tell me how can the fields displays with description from the variable selection screen. I would really apprecite your help.
Thanks,
Venkat -
How to transport requests from development to production server
hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
suryaHi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration. -
Unable to load data from DSO to Cube
Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini. -
Regarding Loading the data from DSO to cube.
Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
ThanksHi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks -
Partial data loading from dso to cube
Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM -
Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3
Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
ThanksYaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a> -
Updating the last date request from ODS to CUBE
Dear Friends,
Please can someone explain me.
i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
but i see in the ODS that all the data mart (tick) is available for all the request.
And please can someone explain me, if i have many request in the ods, current date previous day and so on.
Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
Thanks for your help.
will assign complete points.
Thank you so so muchHi,
if you know everday how many request are getting updated in infocube as one request the you can check the added records in infocube .. it should be equal to the sum of all those request ..
but transferred can be more or equal .. also its depends on the
update rules ..designing ..
Hope this helps you ..
Regards,
shikha -
Data load from DSO to Cube in BI7?
Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully. -
While loading data from DSO TO CUBE.(which Extraction option)
hi friends,
my questin is that when we load the data from one data target to another data target then we have four options to extract the data in DTP screen from (1.active data table (with archive) 2.active data table (without archive) 3.change log table. and fourth i dont remember.so my question is when we update data like from DSO TO CUBE. Then which option we should choose. 2nd or 3nd.?
<removed_by_moderator>
Edited by: Julius Bussche on Jan 4, 2012 9:26 AM- If you want to do a full load always select 2nd option i.e. Active Data Table (without archive).
- If you wand to do a delta load, you can select either of 2 or 3
Active Data Table (without archive) - first load will be full from active table and after that it will be delta from change log
(ii) Changelog table - you will have to do a full load using a full DTP and then delta can be done using this DTP (but you will need to an init as well using this DTP)
- if you have done using a full DTP and now just want to run delta, select 3rd option and do an init before running delta
I hope it helps.
Regards,
Gaurav
Maybe you are looking for
-
I own a 2010 17" MBP. I have upgraded the RAM from 4GB to 8GB, removed the optical drive and installed the optibay cover (1TB HDD in the optical bay slot and 300GB SSD in the primary). Approximately about a few months before my extended warranty was
-
How do I change "At Insertion Point" to "Below Current Line" globally?
Hello, I have a book that I will be converting to Structured FrameMaker. All of the graphics are referenced to the chapters with the Anchored Frame set to: "At Insertion Point" "Distance Above Baseline: 0.0 pt" If I do not change the Anchor Frame to
-
Iphone 5 stuck in recovery mode. Unknown error 9 when trying to upgrade to ios7.
My phone is stuck in recovery mode. Says error number 9 when trying to dl ios7,
-
So, trying to log into skype on my phone, I forgot my password. This is pretty cute actually because I use about 3 passwords for everything. I have tried everything I can think of, and finally sent 3 emails to myself for a reset. Guess how many I got
-
Finding Atmosphere plug-in (?) Where is it???
Loaded Spectrasonics Atmosphere Soft Synth Plug In into my Mac. But when I click & hold the "Setting" button in the Mixer window, it doesn't appear as a choice to be selected. How do I get Logic to "see" or "recognize" that I wish to utilize this plu