How to load the big raster data in georaster?
Hi anyone,
I have 1024G raster data ,I just ask how can I load the data, let it's performance so that it will not be affected by the large data?
you can choose one of many third-party ETL tools for GeoRaster to load the data. They all support TIFF, multi-band and big sizes. for example:
you can use commercial products Safe FME Oracle Edition, PCI GeoRaster ETL Tools, ERDAS enterprise loader, Manifold Enterprise edition, etc. (for a complete list, visit http://www.oracle.com/technology/products/spatial/spatial_partners_isv.htm http://www.oracle.com/technology/products/spatial/htdocs/spatial_partners_downloads.html)
there are also free products or open source supporting GeoRaster. PCI provides a FREE loader and viewer for GeoRaster (http://www.pcigeomatics.com/index.php?option=com_content&view=article&id=77&Itemid=4#GeoRaster). GDAL is fully integrated with GeoRaster. It can load and export tens of raster data formats for GeoRaster. (http://www.gdal.org/frmt_georaster.html http://www.geosofti.com/ http://www.oracle.com/technology/products/spatial/htdocs/spatial_opensource.html)
Due to the large volume of the raster data set you have, please always consider concurrent loading and avoid loading from remote network (copy data to the server and then load).
hope this helps,
jeffrey
Similar Messages
-
How to load the GL Balances data to ECC using BODS 4.0
Hi All,
Could provide the suggestions, how to load in the GL balances files into SAP ECC ( F-02 , F-04, F-08 ) using BODS 4.0 Version other than LSMW.
Is there any simple mechanism to upload the GL files , will be appreciated if you could sent any document / links . We do not have the LSMW enough licences to use it.
Thanks
KumarThanks Harsha, there is NO IDOC for these posts/ loads , for these there would be a bespoke IDOC or BAPI development is required , but we do not want to go through an additional development cost, we looking for options without ABAP development activity. can you suggest any easy options to load financial postings / loads using only BODS .
-
How to load the Web Services Data
Hi,
I tried creating a sample webservice, and here is the code in
the flex part. kindly help me asap, i need to know this for an
interview tomorrow.
Also, anyone can send me links for creating Webservices in
.NET and connecting to Flex.Hi,
The following tutorial explains in detail about creation of web service and using it as ADF Table
http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html
Sireesha -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
How to load the data from informatica into bw & how to report the data
Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22 -
Hello,
In my BI system ,i have the DSO and InfoCube ,haveing the
infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.Hello,
The procedure is as follows.
1) First run the init infopackage (either with or without data), preferably with data.
2) Then run the delta infopackage always. (it will get delta records always).
Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
And then schedule the delta.
REgds,
Shashank -
How to load the exist Data Mart Request in to cube.
Hi Friends,
I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
Can any have an idea on this.
Thaks in advance.HI,
Things are not clear.
How is loading happening if its delta or full load through DTP or you using 3.5 flow??
In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
Data mart status will come into picture only when you schedule the delta loads.
Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
Thanks
Ajeet -
How to load the content in Combobox
Dear All,
Any one can tell me how to load the combobox dynamically.. i have one combobox in that i defined the value as "Defined New" when i click the DefineNew a new form wil come i wil enter the value in the editext. when i click the combobox the value should display.. i have done this, its working fine but the problem is every time when i add the value it wil show the data in the the form Load.. i want data should come dynamically..
any one can help me in this regard
G.shankarYou can use this "oForm.Refresh()" every time you add a new valid value to the ComboBox.
I hope this help you.
Regards.
Enriquillo Guigni -
How to track the flow of data from R/2 to BI ?
Hi Experts,
Question: How to track the flow of data from R/3 to BI ?
I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
Now, i start the update to InfoObject. The load goes on well.
Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
Please help me know how this can be done. (For example lets take cost element master data)
Regards,
Suraj S NairHi,
Data flow :
BW :
When u right click on the Master Data Info object -> Select Data flow.Then it will show u the details like DS name,IS (If 3.x)
Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables or help.sap.com.
My suggestion better to search in Help site for DS source tables.
DS Tables :
The following link will provide you the source tables for some of the LO DS.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM -
How to Send the material master data from sap4.6c to ECC6.0
Hi
Friends this is shalini Shah, i got one requirement that is
how to send the materail master data from SAP 4.6C to ECC6.0 using XI.
i know the file to idoc and idoc to file scenarios but i don't know this one.
please help me friends, Thanks in advance.
Regards
Shalini ShahHi Shalini,
To trigger IDoc these configurations should be done in the SAP 4.6, XI and ECC 6.0.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3 (4.6 and ECC 6.0)
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also go ther the Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> By Swaroopa Vishwanath
U need to import the IDoc types both inbound and outbound to XI.
1. Create Inbound and Outbound Message interface.
2. Do one to one message mapping.
3. Define an Interface mapping.
ID:
1. Create 1 Sender aggrement.
2. Create 1 Receiver aggrement.
3. Define 1 RD and ID.
4. Only create an receiver IDoc CC.
Regards
San
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way. -
How to load the subinventories
Hi,
How to load the subinventories if i have around 200 programtically?
Note : i dont want to use data loader for it?
Regards
846691This is from MySupport:
Currently there is no API or Interface table to upload the subinventory related information.
At present there is no other option other than to use the front end application .
There is an existing enhancement request which may be released in future release.
hope this helps -
I have enhanced standard master datasource , How to load the Text for it?
Hi Experts,
I had enhanced 0MATERIAL_ATTR with ZTGRM field.User exit is written and the data is populated and checked in RSA3.
Replicated,loaded in BW side.Activated the master data.It shows only the attribute not the text.
Tried loading 0material_text and loaded successfully, activated but while maintaining the master data , i can able to see only the attribute values not the text.
Can any one help how to load the text for the enhanced attribute?
Thanks in advance
Ganesh KumarHi Tony,
Loaded the 0MATERIAL_TEXT ,also sucessful.
After loading activated the 0material but i could only see values for 0material_attr not for the 0material_text.
Can you tell me how to load the text data to the newly enhanced attribute???
Maybe you are looking for
-
Hi, I am trying to create the DB link across two different platforms where 32 bit oracle is installed in 32 bit windows platform and 64 bit mysql is installed in 64 bit HP_UX platform. After the initial configuration, I finally execute the following
-
ITunes does not see music files in folders in external drive after crash
I put over 3000 music files on an external drive. It was a laborious project to organize them so iTunes would recognize them and organize them. Unhappily, my laptop crashed this morning and I had to restore the whole hard drive to a backup of 3 week
-
Is it possible to get the value of variable through answers page ?
Hi all, I had Dynamic variable ETLRundate . I want use this variable in Answers page to see the out put ? Is it possible to get the value of variable through answers page ?if so how I can use ?
-
TagLib in Default WebApp??
Hi, I can use Taglib with WEB-INF/web.xml, taglib.tld in my specified web application in WebLogic 5.1. but, how can i make it work for the default web application under myserver/public_html ?? Insted of htttp:/
-
hi, is the concept of ordering of tables in FROM clause still valid for CBO. I mean the concept of oracle selecting the driving table based on the positions of table in FROM clause still valid?? If yes, then how should the tables be placed? the one w