How to Load the Master Data for custom defined Z infoobjects?

Hi Gurus,
This is the requirement.
Some screen enhancements has to be made by adding new Custom fields( like two text boxes,eg Name and city ) in such a way if we enter data into that text box,that data value for both of the Enhancements has to be stored in some table.If this data is a master data,then how would I pull this master data into BW.
Please someone throw some light on this problem.
Lets say a Screen is enhanced with NAME and CITY with text text boxes.Let the user enters the value for NAME and CITY.Let them be stored under two different tables ZTAB1 and ZTAB2.How would I load this master data into custom Defined Z infoobjects ZNAME AND ZCITY in BW.
Please help me out.
Thanks is Advance,
Regards

you can by creating generic datasources on thoase tables with Full load or delta.
if the number entries is less.. you can try full load...
if it is more... along with required fields...put date also as one fields. which needs to get date of execution of program or date of uploading to Tables. this will be useful build Delta Mechanism.
all the best.
Nagesh Ganisetti.

Similar Messages

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

How to Lock the master data. R/3 Conflict ESS

Dear Gurus,
Please guide me how to lock the master data for a nos of days(say 7 days).
Recently we had encountered an issue, related to ESS. While Uploading the Time data through t-code: PT60, our core team encountered a problem, that such and such employee number is locked.
While checking, they identified it, system shown error against those employees, who are accessing their ESS. We check and came to know they are accessing the master data by changing their personal record i.e. address.
Do we have any other provision to lock the master data without setting the control record to release for payroll.
Please help .

Create a custom transaction involving a custom views of table T7XSSSERSRV with the following field for each service
"V_T7XSSSERSRV-ISDISABLED"
when HR wants to lock it, the will enter this table and check this field.
this will disable the servcies in the front end.
Once the 7 days are over, HR will uncheck this field. this will re-enable the services in the froint end.
Hope this helps.

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

How to fill the master data in ecc

Hi,
0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
Regrads,
devi.

Hi Devi,
Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data.
BDC and LSMW both are used for loading data into SAP system.
Or ask even directly they can create in ECC. If it is for your testing purpose, it is better to ask them to create master in source system .
Thanks
BVR

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

Open hub Services - How to extract the master data related to a object ?

Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

Hi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks.

DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

DIM IDs are polluted only when we load the Master data and SIDs are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SIDs when we delete the transaction and master data.
a. True
b. False

Hi,
You can use the mapping section of the transformation file for this purpose. It should be something like:
*COL(5) + *Str(_) + *COL(1)
I am considering that the 5th column of your file is the property. The 1st column is the ID.
Please take a look at the below link for more information:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
Hope this helps.

How to load the exist Data Mart Request in to cube.

Hi Friends,
I have a scenario... i got DSO and one Cube , iam loading the data from DSO to Cube .
The number of records are more in the DSO and due to some clculation in the routine i need to load the data year by year(i got 2007 and 2008 year daya). I have loaded the 2007 data to the Infocube and in the DSO i can see the Data Mart Symbal against the Request Id when th load is finished successfully.
When iam trying to load the 2008 data from DSO to Cube iam getting the "0" records. I realised that the Data Mart symbal is exist in the DSO.
How to load the 2008 data in this scenario. If i delete the data mart sysbel means iam deleting the Cube request.
Can any have an idea on this.
Thaks in advance.

HI,
Things are not clear.
How is loading happening if its delta or full load through DTP or you using 3.5 flow??
In any cases if you do a full load or full repair based on the year selection it should pick the records from the source...there is nothing to do with the data mart status in the case of full loads.
Data mart status will come into picture only when you schedule the delta loads.
Do a full load based on selections on year from the DSO to the cube...no need to delete the data mart or it will bring that request again delta is scheduled...does that request in DSO contains the data for 2008 only ...if yes then you can just delete the data mart status for that and do a delta...if not then do full loads as said.
Thanks
Ajeet

Credit master data for Customer

Hi,
I need solution for the below problem.
Credit master data for Customer "X" is not maintained.
Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
Information/Error message shouldd be:No credit master data maintain for Customer "X"
Thanks for your help.
Regards,
Balaji.

Hi
You can use the followig user exit which will perform a check while saving the order.
Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
Program,: MV45AFZZ
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Regards
Madhu

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

What are the T-codes that contain the master data for material and vendor?

what are the T-codes that contain the master data for material and vendor?

hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat.

How to find the creation date for a released requests..

Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..

hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod

How to Load the Master Data for custom defined Z infoobjects?

Similar Messages

Maybe you are looking for