How to load up vision m first time without adapter ?

Hi,
I bought the vision m online, but i bought it in u US-store. So my power-adapter does not fit at my home in belgium. But how do i load the vision m via usb without installing it first ?
When I install the drivers and finally when i need to plug in the vision m it cannot be found... because it is low powere
Please somebody help me, please

Now during another try at installing the drivers when connecting it did suddenly load with usb but i already but apparently windows did not found it yet than...
So wait 5 minutes for the player to be a bit charged, i unplug the usbcable, i install the drivers but when asked "switch on and then connect players..." I am unable to switch the player on!! :s:s:s
I just turning insane here!! I waiting so long for this players, i am a student so i had to put money aside, i waited for a month, had it come from a different country and now the only thing i have is trouble!
Everything i have is creative! It has ALWAYS been, i have soundcards, speaker sets, webcams, mouses, i've had a micro AND a sleek...
I had this for my holiday, i can't wait 6-8 weeks for another unit... and even then, i bought it online in an american store and i am from belgium... i can't just pay these costs to send it!
Why is this happening to me

Similar Messages

  • F4v wont load in firefox the first time.

    Hi all!
    Im not sure if this is the place to put this, but i have a problem.
    I have created a swf movie file that containes the movie playback panel & a f4v video & I have uploaded them to a subfolder on my server.
    The whole site has a secure connection (https), but the page that i will try to embed the movie will have a regualr connection (http).
    The problem arises when i do embed this flash video in a HTML file. in IE & Chrome it works and looks great, But in firefox it doesnt.
    If i clear my cache (as if i were a new visitor to the site) and enter the page, the movie isn't displayed at all...is shows "done" in the browser loading bar.
    After about a minute or so (which i assume is the amount of time it takes to load the full movie), i hit refresh, and the movie appears fully loaded.
    The movie is currently embeded in my homepage (via Iframe - for site protocol reasons), and if it wont load immidiatly from the first time a user enters the site, many users will miss the video (and get a blank white box in the middle of the site).
    The URL for the html file is http://www.globaloption.com/PartnerSites/globaloptions_en/vid/Global9.8/videosmall.html
    I really hope you can help me make sense of this problem...

    you should be using a local path to
    http://www.globaloption.com/partnersites/globaloptions_en/vid/global9.8/videosmall.f4v
    are you?

  • How do I upload for the first time?  It just keeps saying updating 1 file.  Frustrating!

    How do I upload for the first time?  It just keeps saying updating 1 file.  Frustrating!

    Hi Mike,
    I would think (from your original post) that the document was created in Numbers '08. Numbers 3.2.2 will not open a Numbers '08 document. Hence the message to save in Numbers '09. It looks as though your colleague must export to Excel and send you the Excel version.
    Regards,
    Ian.

  • IPad 2 starting for the first time without itunes ?

    Hello everyone,
    I just bought an iPad 2  for my brother in India. :-).  A brand new iPad 2 in a white box from best buy. I have couple of questions and hope the forum members would help. Thank you.
    1. As i unboxed , i pressed the Home button, and the iPad screen didn't show the connect to itunes logo,instead led me thru' a series of steps like registering for itunes/apple password and it just started on its own. It works fine though ,however i found this to be weird to start without connecting to itunes. Is this considered "normal" for recent iPad 2's to start without itunes ?.
    2. What kind of travel adapter would you suggest for use in India /240V ?. I was suggested to purchase  a world adapter kit from apple store for $39.00 ,but i would use only one adapter and the rest wouldn't be of any use ? Could you suggest an adapter to use in India ?

    Sunnyr wrote:
    Thank you. My question is about starting iPad 2 for the first time without connecting to iTunes ?
    As of iOS 5, it is quite feasible to start up, configure and use an iPad without connecting to iTunes. My New IPad has NEVER been synched to a computer.

  • I just loaded Firefox, and the first time I try to open it, I get the message "Your Firefox profile cannot be loaded. It may be missing or inaccessible." I tried deleting and reloading to no success. Any clue about what is wrong?

    I downloaded the free Firefox system from the web. I have not been able to open the system since loading it.

    I can not find any of the files you address.
    I am tying to install Firefox for the first time. SO, if that is the case, how can any of these various files exist? I cannot access the contents of my "Application support" folder.
    I have tried to delete Firefox and start over, and the same error message comes up.
    I guess my frustration is how can I have a profile if I do not have Firefox installed?

  • !!!Loading Servlets for the first time!!!

    Whenever I first start weblogic and I hit a servlet for the first time there
    is a long initialization period. My servlet uses a ton of other classes
    which is the reason for the lag. Once it is hit for the fist time, every
    subsequent hit is very fast. This I believe is due to the fact that all of
    the other dependent classes are loaded into Weblogic's JVM.
    My first solution to this problem was to use weblogic's build in servlet
    startup class which loads the servlet and calls its init method. This does
    not work because much of my initialization is done in other servlet methods.
    The servlet itself is initialized but all of its dependent classes are not.
    My second solution was to preload all of the dependent classes when the
    server starts up. So when the first user hits the a servlet they do not have
    to wait 30+ seconds. Therefore I also tried implementing a T3Client of my
    own which extends T3StartupDef. This class takes in as args all of the
    dependent classes and loads each one into memory. But this seems not to work
    because I JVM is garbage collecting all of the classes initialized.
    Has anyone out there encountered this problem.
    Thanks much,
    -Jim

    How often does this servlet have to be reloaded? If your WL server isn't
    being bounced, then only one server per WL bounce will ever see this
    problem; a simple solution would be for the support team to just invoke that
    servlet on those occasions when the server bounces.
    "James Lobraco" <[email protected]> wrote in message
    news:3986ffe2$[email protected]..
    Whenever I first start weblogic and I hit a servlet for the first timethere
    is a long initialization period. My servlet uses a ton of other classes
    which is the reason for the lag. Once it is hit for the fist time, every
    subsequent hit is very fast. This I believe is due to the fact that all of
    the other dependent classes are loaded into Weblogic's JVM.
    My first solution to this problem was to use weblogic's build in servlet
    startup class which loads the servlet and calls its init method. This does
    not work because much of my initialization is done in other servletmethods.
    The servlet itself is initialized but all of its dependent classes arenot.
    >
    My second solution was to preload all of the dependent classes when the
    server starts up. So when the first user hits the a servlet they do nothave
    to wait 30+ seconds. Therefore I also tried implementing a T3Client of my
    own which extends T3StartupDef. This class takes in as args all of the
    dependent classes and loads each one into memory. But this seems not towork
    because I JVM is garbage collecting all of the classes initialized.
    Has anyone out there encountered this problem.
    Thanks much,
    -Jim

  • How to sync iPhone with iTunes for first time without setting up as a new iPhone

    I have an iPhone 5 that I have never sync:ed with iTunes on my Mac, I have just set it up and purchased apps etc from the iPhone itself.
    Now I would like to sync with iTunes for the first time with the iPhone but when I connect it, iTunes asks me if I want to setup the iPhone as a new iPhone (I assume form scratch) or from a backup from other iPhones that have been sync:ed with my Mac.
    Now I dont want to setup this iPhone from scratch and erase everything thats on it, I just want to sync with my Mac, download apps, music etc. How do I do that and get beyoind the first screen that asks about setting up as a new iPhone ?
    /Kjell

    Hi I think I've found a workarround. I'm currently copying all files on my iPhone to the new PC using this program: http://www.getsharepod.com/download/
    After all files are copied I think I can enable sync in the new iTunes and delete the iPhone, then add the copied files in new playlists.
    I'll let you know.

  • Firefox does not load any sites the first time, including Firefox itself, other browsers do.

    In the last few days I have experienced a problem logging on to nearly every site the first time. I get the message that the connection was reset....we have 3 identical computers in our home and I am the only one experiencing this problem. I can immediately try again and log on, but it is annoying to get that message with all sites, including Firefox itself, I have tried to clean out my cache and my cookies, but the problem persists.
    Also, firefox is locking up my computer frequently. As it is as I attempt to send this message. I will copy and past this into another message as soon as I restart my computer.

    Hi cor-el,
    Yes the problem has reappeared, so I tried bypassing the cache for my Windows computer as you suggested: Hold down the Shift key and left-click the Reload button, or "Ctrl + Shift + R" (Windows) I then clicked on my bookmark (http://mdotnetpublic.state.mi.us/drive/ ) and I still see a blank screen and a spinning wheel. This seems to go on indefinitely. But like before I posted the question, when I click the reload button it forces the page to load right away.
    [running Firefox 32]
    I appreciate your quick responses, and look forward to more suggestions. I'll also search the support pages for information about my problem.
    Thank you.
    Mbr9743

  • How to download certificate for the first time programmatically?

    Hi, I'm accessing a https server which has a self signed certificate for the first time. I was trying to download the certificate using like
    cert = sslsession.getPeerCertificates()[0]
    However I got the following exception: SSLPeerUnverifiedException
    If I have the certificate on disk and I installed it using keytool to the keystore, I could see the keychain using this method. But is there a way in java to download the certificate for the first time?
    Many thanks.
    minji

    hi ejp, thanks a lot for the link, it really helps a lot.
    Now I'm having another problem. I could now download the certificate and store in my keystore. but if I immediately reconnect to the https web page, I still got the exception telling me the certificate was not found:
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    This should not happen as I have already had this certificate in my keystore. If I rerun the program, there's no problem, indicating the certificate was really there. I first guessed I might have to again call System.setProperty("javax.net.ssl.trustStore", "mycacerts") but that does not help.
    anybody with an idea?

  • Sync my iphone calendar with MobileMe for the first time without deleting?

    I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
    How can I start using MobileMe on my phone without losing all my events/appointments??
    And what's the logic behind this behavior? I don't get it.

    childlost,
    This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
    I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
    Hope this helps,
    Raleigh

  • Can I sync my 'PC Free' activated iPhone with downloaded apps to iTunes for the first time without loosing data?

    I have an iPhone 4 that has been activated over the air, "PC Free" and have used it for a month without ever connecting it to a computer. I have downloaded several apps, taken a few pictures, and even downloaded a few songs. Now I want to connect to my computer and sync and backup. Will I loose all my data?

    Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
    If she has data on the phone she wants to save, back up manually:
    Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Transferring data is also covered here: http://support.apple.com/kb/HT4137

  • Create Planning Application for the first time without using workspace

    hi,all:
    I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
    thanks very much

    yellow wrote:
    Hi,John,Thanks for your quick reply.
    I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
    Is the address you said different from http://localhost:8300/HyperionPlanning/?
    thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
    Notice the AppWizard.jsp on the end.
    If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HOW DO YOU" DELETE BOOKMARKS" AT ONE TIME WITHOUT DELETING ALL.

    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How do you" delete bookmarks" at one time, but not all of them. For instance highlight the ones you don't want. But with Fx that doesn't work. I love Fx and tell everyone I know about you and have for years. Please help !!!!!
    == Troubleshooting information
    ==
    How do you" delete bookmarks" at one time, but not all of them. For instance highlight the ones you don't want. But with Fx that doesn't work. I love Fx and tell everyone I know about you and have for years. Please help !!!!!
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Shockwave Flash 10.0 r32
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *Google Update
    *Java(TM) Platform SE binary
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    *Npdsplay dll
    *DRM Store Netscape Plugin
    *DRM Netscape Network Object

    Please take a look at knowledge base article [[Deleting Bookmarks]] on how to delete one or more bookmarks at once.

  • Starting IMac for first time without the paired bluetooth mouse

    I bought an iMac at the Apple Store today. I wanted a trackpad rather than a mouse. He pulled the mouse from the box and inserted the trackpad. I got home, booted up for the first time, and it wants me to turn on the factory-paired mouse that I don't have. I can't get past this screen to pair the bluetooth trackpad instead.
    The keyboard is paired and functional, but I can't find anything that bypasses the screen telling me graphically that I need to turn on the mouse. I do not have a wired mouse to plug in, even if that would work.
    Thoughts?

    No, it insisted on a mouse. I did, however, find an old wired mouse (didn't think I had any left), and once I plugged that in, it bypassed the screen telling me to turn on the wireless mouse. Then I set up the trackpad using the setttings.

  • How to load a file at design time?

    I have a custom component which has a property that takes a path to an xml file.
    I have a file chooser property editor associated with the property which returns a relative path. The component correctly resolves this path at runtime using the application context etc.. but I'm at loss on how to do this at design time.
    The image component in JSC does this correctly as the image is loaded at design time using the url. I'm not sure how this is done but I'm looking for exactly the same functionality.
    The only way I figured to correctly resolve the physical path of the file at design time was through the DesignBean.
    In order to resolve the path and pass the resolved path to the component property I need to intercept property changed event and change the property value. However doing this in PropertyChanged(..) method of DesignInfo bean for my component doesn't do it as this is called 'after' the property value is set and changing the property value at this point results in a circular loop.
    Is there any way to accomplish this? Any help is appreciated.
    Thanks.

    Is this still unresolved? I'm sure you've read everything at "Building Custom Components"
    http://developers.sun.com/prodtech/javatools/jscreator/reference/index.jsp#Building_Custom_Components
    by now. I don't have the answer, but if it's still a problem, I'll work with you to figure it out.

Maybe you are looking for