How to 'lock' my cursor to one of my two monitors?

Hello all, thanks for reading my question!
My 'problem' is the following: I recently started using a second monitor on my iMac [OsX Yosemite - 10.10.2 / i5 - 2,7GHz / 8GB 1600MHz DD3]. The additional monitor is a Samsung 40" Television screen that I have been using with my old Windows PC. My input-devices are the standard wireless keyboard and magic-mouse, and in addition to that I am using a Wacom Graphire4 with Bamboo-drivers since it's not compatible with the latest version of OsX. The only software I installed to streamline this setup is called 'CatchMouse', which I use to center my cursor on either one of my monitors.
What I would like to be able to do is lock my cursor to either one of my screens, and use my shortcuts to switch between them, without the possibility of my cursor jumping to the next screen as soon as I get too close to the edge of my screen. I have tried to change the alignment of the two screens in the preferences-menu, but that still didn't prevent my cursor from 'jumping' from one screen to the other. Is there a workaround for this, or perhaps additional software?
The reason I would like to do this is my Wacom, I use it in absolute positioning (meaning that the top-left on my input-device is the top-left on my screen) and the second screen 'sorta' ruins that experience for me..... There's always a chance I am overlooking a very basic setting, apologies in advanced if this turns out to be the easiest thing to do on a Mac besides hitting the Power-button.... Perhaps some of you have the same 'problem' and know a workaround for it, I will of course continue my quest for a solution on the rest of the interwebs and post it here if/when I do find it, but any extra help from here will be greatly appreciated.
Thanks for now!

You need to contact Adobe support thru chat and ask them to reset your activations. I don't believe they work weekends though.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Your license provides for you having two machines with activated installations, so if the lost machine was the only installation then there is nothing keeping you from installing and activating on the laptop.
As far as downloading CS3 products goes, here are the links I know of for that...
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Similar Messages

How do I change Itunes from one account to two in my home?

how do I change Itunes from one account to two in my home?

You don't.
What are you trying to do?

My three year old was playing with her sisters IPOD and somehow figured out how to lock it. No one knows the unlock code can you soehow reset the device

My three year old was playing with her sisters IPOD and somehow figured out how to lock it. Now it is locked and noone knows the unlock code, Is there a way to master reset/wipe the unit?

Gretchen,
What iPod model does she own? If it's a Nano, simply connect it to iTunes and restore it.
If it's an iPod touch, you will need to connect to iTunes in Recovery Mode and restore it using the instructions in this Apple support document.
http://support.apple.com/kb/HT1808
B-rock

How to run two programs with one PC and two monitors

Good Morning,
I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
Thanks in advance

Hi Parker,
yes, it's possible. You also have properties to set windows to specific monitors...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is there a way to have one workspace with two monitors?

In Maverick is there a way to return to the system were you have 1 workspace and two monitor? Where at present there is this tendency for applications to auto hide partially.

Yes it is, my bad. I'm running an external display myself and have that setting. I saw the preference with the checkmark and wrote that one by mistake.

How to set the cursor to one point (x0, y0)

Hello
I work with swing and I have done a GUI.
In the GUI, I have some points. When I approach one point (x0, y0), I would like to set the cursor of the mouse to the exact position (x0, y0). But I can't find the class that can set the position of the cursor.
Could anyone help me, thanks.
danfei

Have a look at Robot-class, there's a method mouseMove.
Hope that helps.

How to remove all colors but one, or perhaps two, w/ everything else B & W?

Hi! I have the latest Final Cut Studio and I'm trying to figure out how best to make everything black and white except for deep reds. I might light to add deep blues or "ripple of gold color" here and there, but the first step is understanding a good work flow for getting all but one color. Any suggestions? Much thanks!!!!!!

Hello, I have a similar question to a previous post about desaturating specific colors. I'm editing together live footage from multiple cameras for a Concert shoot and two of the four have black clothing showing up as a "purple-y red". How can I select only a specific range of colors in one locked area (So as not to affect the lights in the background which are displaying the proper red/purple colors) and adjust it to be more black without making the entire shot look overly colored/contrasted?
Sorry if this is easy but I'm new to Color and FCP wasn't much help w/ it's simple color correction effects.
Thanks!

How can I access apps on one device from two iTunes accounts?

I have been told that apps can be loaded on the iPad from multiple iTunes accounts. Is this true? If so, how does one do it. My son has a school issued iPad. The school IT lead informed us that we could use apps that the school provides form the school's account and apps from our personal iTunes account. Please advise. Thank you.

You have to sign in and out of the accounts in the settings.
Settings>iTunes and App Store>Tap on the ID and sign out then sign in with the other ID. If you are running iOS 5 or under, it is Settings>Store>Tap the ID and sign out and sign in with the other ID.
You might want to read this first.
iTunes Store: Associating a device or computer to your Apple ID

How do I use icloud with one mac and two iphones

I have just got an iPhone 5.
My wife and I share a macbook pro
My wife has an iphone 4s and uses iCloud to sync photos etc.
I want to use iCloud too, so.....how do we use iCloud so:
- when we each take photos on our phones they sync to our mac
- our contacts sync (can we set preferences on our individual phones so we only get the contacts we want on our iPhones from a shared address book on the mac)
- we have individual calendars
Any advice much appreciated.
Thank you.

If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account. Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On. If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group. Then turn iCloud syncing for Contacts to on on all your devices. To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view. When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud. If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account. This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones. And by using contact groups you can filter your view to just your own contacts.

How to display events of only one IPS in Security Monitor?

Hello,
i searched the forum with no result. I have CW 2.2 with IDSMC 2.1. I got two IPS and 2 IDSM-2 (4.x is in production / 5.x is in test) which have all their four interfaces sniffing in different network segments. Now i am flooded by the thousands of messages from the internet with no possibilty to just concentrate my view on the events generated on only one special interface of a single IPS.
To temporarily focus only one one interface of a single IPS how can i filter the events in Security Monitor to only display the events of a this device and a single interface?
This would be extremly helpfull for to simulate attacks in an test environment with shuning/blocking. I have rare possiblities to set up a second CW IDSMC on another machine. And after all, i would appreciate to focus (filter) in that way for later examining my network to tune signatures and events.
Furthermore, on IEV 4.1 i was able to get a real time dashboard showing 'real time' events. I did not see this functionality for IPS 5.x and IDSMC. How can i view real time data there to see my networks reaction to simulated attacks.
Any ideas how to only display only wanted data in Security-Monitor?
Thanks in advance, Gerhard

As far as I know, you cannot display the events of only one IPS in Sec Mon.

How to create a contract with one supplier and two dealers?

Hi Gurus,
I have a contract with a supplier (eg. Apple), but the products and services are supplied by two dealers.
The supplier is the manufacturer and with whom the negotiation of prices is made.
The dealers are those who make the delivery of the products and services and who the payment is done.
How can I create a contract with these characteristics in SRM 7.0?
I don't want to create two contracts with same products and services for two suppliers (Dealer_1 and Dealer_2).
How can this be handled through business partner type "Vendor"?
In "Partner" section in "Header" --> "Basic data", I can only add 1 vendor.
The system is:
Component software: SRM_SERVER
Release: 700
Level: 0008
Support package: SAPKIBKV08
Thanks in advance and best regards,
Alonso Valenzuela

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

How is it possible to suppress one of the two iTunes account from the iPhone?

Hey =) I'm sorry for the bad english, but i'm french.
So, I'm totally lost, my mother is like... Furious, mad at me... Because the other day, i used her iPhone to register with MY app store account, (so iTunes Store Account, to be clear), and since then, she can't use her iPhone without having it asking to give MY password when she wants to upload anything. So i'm really really lost.
And second, my mother is SURE it's linked to that problem, that i caused with my connecting to my iTunes account, she doesn't have any of her musics anymore in the iPod part of the iPhone, the only way she can listen to them is in the "Achats" in French (= Uploads? The things you bought on iTunes, i don't know how to translate that sorry) of the iTunes Store, and she can't put them back into the music of the iPod.
I REALLY need your help, she's mad at me, she says i broke her iPhone... Thanks!!

Yes... It's your fault. The easiest way to fix it would be to plug it into her computer and restore it from the last backup she made before you touched it.

All Develop sliders visible at one time across two monitors or wide monitors

Is there any way to have all the Develop models visible at one time instead of having to scroll downwards ?
I have a 21:9 screen with lots of horizontal space, so I would like to have the Develop sliders fill the space horizontally instead of vertically. Or if Develop panel can be fully visible on a second or third monitor.

As far as I know there is no way you can do that.

Spanning one image across two monitors?

If this has been asked before, I applogize. It is probably a simple solution, but, not sure if it is possible.
I am using an Imac 17" Display, 160 Gig HDD, 1 Gig RAM and an external 19" monitor (as an extended desktop)
I have downloaded some of the split screen backgrounds, and, they look fantastic, but, they can be hard to find.
I am wondering, if I get a widescreen background (Single. Not Dual Monitor), can it be set to Span the image across both monitors?
My resoloution for my 17" Imca is 1400 X 940 (Or, whatever the native resolution is for it)
My external monitor is set to 1280 by 1024
Any help would be appreciated.
Gary

I had the same problem. U need to install ITAP RPD, it supports spanning very well. U can test with their trial version.
I have a new IMac 27" with 27" Thunderbolt second display. Working on remote desktop with 5120 x 1440 pixels is awesome, and ITap supports it very well
Cheers

No mouse cursor on one monitor - Windows 7 Boot Camp

Hello,
I installed Windows 7, and ran the boot camp installer; however, since then, my mouse cursor does not appear on one of my two monitors. I can still click on things (if I can figure out where my invisible mouse is), but the arrow itself is just gone. This is only the case within Windows; mouse works fine on the Mac end.
Hardware in question:
Computer - Mac Pro with NVIDIA GeForce GT 120 graphics card
Monitor with issue - Hannspree widescreen monitor connected via HDMI cable + HDMI to mini DV adaptor
Other monitor - hp fullscreen monitor, connected via VGA
I'm wondering if it has something to do with my NVIDIA drivers on windows, because the mouse shenanigans seemed to start after this step in the Bootcamp installation process.
Any ideas for how to fix this?
Thanks very much.

Then google for Cirrus Logic Audio for Mac running Windows.
Something like this...
MacBook Pro audio sound fix
http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
Cirrus Logic CS4206A (AB 11)
I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
*MacBook Pro No Sound in Windows 7*
Posted by Geek on +Jul 23rd, 2010+
* You are running Vista or Windows 7 on a Macbook
* You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
*Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
+(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
+In case the above download link does not work google+ CirrusAudio.10.6.1.zip
*Step 2:* Extract the right type of Driver
(depending on your windows XP/ 7/ 32 bit/ 64bit)
Step3: for Windows 7 only: Right Click on exe file of driver.
Select Properties> Compatibility > run in compatibility mode
Select Windows Vista from drop down menu and Click OK
*Step 4:* Double click the driver and install.

How to 'lock' my cursor to one of my two monitors?

Similar Messages

Maybe you are looking for