How to lock windows 8.1 with selected applications

In windows 8.1 how to make a kiosk mode with selected application(Mail, IE, Camera & Reader)

check this, hope it will answer your question
http://blogs.technet.com/b/canitpro/archive/2013/12/17/step-by-step-enabling-kiosk-mode-in-windows-8-1-via-assigned-access.aspx

Similar Messages

How to install Windows 8.1 with Windows 8 Product key?

I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store. It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

HT4085 how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

You can set a passcode to be requied to unlock the iPad via Settings > General > Passcode Lock. In terms of locking the actual screen whilst using an app, then that isn't currently possible, but with iOS 6 in the Autumn there will be a new 'accessibility' feature (from here) which will allow you :
... to limit an iOS device to one app by disabling the Home button, as well as restrict touch input on certain areas of the screen

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to integrate Oracle Right Now with our application Calling Button and Chat Button Application is on WebCenter Sites

How to integrate Oracle Right Now with our application Calling Button and Chat Button. Application is on WebCenter Sites

Thanks handar. As per your instructions I have tried OAM authorization policy and its working fine. But we also wants to check the same with OES also. Currently I have configure weblogic SM and created domain. In same domain I have deployed my application also. I have created application, resources and authorization policy to authorize /myfolder/index.jsp if user has some specific role. Now if I try to access my web application using http://host:8001/CONTEXT/myfolder/index.jsp, it doesn't check if user is authorized or not. I guess my application is not related to the resource I have created. Please help me with this. Also, let me know if we can retirive logged in user from session and use for authorization.

How to create Windows 7 Homegroup with Verizon Router

I have a desktop and a laptop, both running Windows 7 (the desktop is running Windows 7 Home Premium, the laptop is running Windows Ultimate). With XP I had a nice network and could share printerhs, files, etc .
After I upgraded both machines from XP to windows 7 I cannot get the homegroup to create AND share. I can create a homegroup on either machine, but in either case the other machine cannot see the home network.
Windows 7 says that Homegroup requires IPv6, but Verizon Routers don't support this protocol. I have attempted, as noted on the internet, to disable IPv6 on both computers, but this didn't seem to solve the problem. I chatted with an Verizon tech support person who told me no IPv6 routers.
I am looking for suggestions on how to successfully network my computers with Windows 7 and my Verizon router. (Actiontec M1424-WR). We previously tried to put another router in the interface to do wireless and that didn't work.
Thank you.

IPv6 connectivity needs to be enabled on the Windows 7 machines to support HomeGroup networking. Make sure you re-enable those. Once IPv6 is re-enabled, verify that the PCs are at least holding a Link-Local IPv6 address. Open up command prompt and type in "ipconfig" to verify it is holding something, first of all. It's also a good idea to make sure Teredo is in working order as well, as it's considered to be needed in order to use IPv6 on an IPv4 router.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How to remove Windows Sign-in with Password upon Startup

hi. Can anyone help me? Whenever we buy a new laptop, my husband always told me to "just leave it blank" , referring to the Microsoft Windows sign in with blank box for typing in a password. "This way you don't have to type your password everytime
you sign in." I am totally in agreement with this. Why do extra work everytime you open your laptop? So we have always done that. Last weekend a client made me skype with her. I had to download Skype. I was offered only two options for signing into skype:
either through Facebook or Microsoft Windows sign in, so I had to get a username and password at that point with Microsoft Windows. (Yes, there probably was some way to sign straight into Skype but the corporate relationship comes first, with Microsoft, so
they only provided me a screen with those two options. Nowhere else on the Skype screen did it say there was a third option.)
Now everytime I open my laptop I have to type my long Microsoft password. Right now I am in msconfig and reading every single running service under Startup, Services and Processes and cannot find the name of the authentication for Microsoft upon Startup,
to disable. What is the name of it? Under which category?
I use Windows 8.

On Fri, 31 Jan 2014 15:15:05 +0000, norqdo wrote:
hi. Can anyone help me? Whenever we buy a new laptop, my husband always told me to "just leave it blank"
This is not the correct forum for your question.
Please repost your question to one of the Windows 8 forums:
http://answers.microsoft.com
Paul Adare - FIM CM MVP
Q. How do you solve bus problems?
A. Shoot the driver.

How to eliminate windows partition created with bootcamp

Instrucdtions for how to eliminate a windows partition created with bootcamp. thanks

Go back and reread and open the application you used.
though most Mac Pro owners choose to dedicate a drive to Windows.
Even Disk Utility will remove and then stretch the adjoining partiton it is best to use Boot Camp Assistant.
Best place to ask, Boot Camp forum, of course.

How to create a DB Adapter with select query having inner query

Hi All,
I am trying to create a DB Adapter with select query. The query has some inner queries in it. It is just like this select a, b, c, (select d from e) d, (select e from e) e from tablename.
The problem here is with the xsd generated for this query. Xsd is not getting generated properly for all the fields it is just getting generated till c element and when it encounters
the inner query it is stopping the generation of xsd. So for the above query the xsd is something similar to the below
<xs:complexType name="rewOutput">
<xs:sequence>
<xs:element name="a" type="xs:string" nillable="true"/>
<xs:element name="b" type="xs:string" nillable="true"/>
<xs:element name="c" type="xs:string" nillable="true"/>
<xs:element name="select_d" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
as shown above the xsd is just getting generated till the first inner query. What should be done to get the full fledged xsd. Should it be manually built ?? Please help me on this.
Thanks In Advance.
Edited by: 959766 on Nov 30, 2012 1:20 AM

Hi,
I don't think the parser will be able to understand your query properly... I would try building the xsd manually...
Cheers,
Vlad

How to configure Windows server 2003 with WebDav

Can anyone advise on the best way to configure Windows server 2003 with WebDav so I can get the likes of some of those Apps such as PDF Expert and GoodReader to see the folders.
I have installed the necessary services and on a Windows PC and can browse to the URL OK which lists the files (setup using a Virtual Directory).
When I tried using this with GoodReader/PDF Expert, it could not find the server in question.
Can anyone help me?

Hello，
Please make sure you have checked "anonymous users" on receive connector.
Do you mean you can't send an email to external email address? If so, please post the detailed NDR information.
Please use get-receiveconnector | fl cmdlet to check your receive conenctor configuration.
Cara Chen
TechNet Community Support

MDT : creating windows 7x64 images with required applications and deploying it

Hi,
We have to create windows 7 x64 and windows 8 images with all the custom applications and which can also be used on all the hardwares. I heard MDT can be used. How can I do this and what are the pre-requisites for installion and steps for configuring MDT
tool ?
do we need ADK for installing MDT ? I tried installing ADK ,but it says you need have ADK documentation_x86_en_us.msi.
Thanks.

For drivers, I have always used the .inf files.
For applications, it depends upon how you want to deploy them. Lots of people build their 'gold' image to contain all the applications they want installed, and then use that as a basis for deployment. Others build special scripts in to select
specific applications based on security groups.
The thing about MDT is that it is very flexible and can be adapted to a lot of different situations. You first need to define exactly how you plan to use it and then build your image(s) accordingly.
The guides you can find online will assist you in the specific steps for the solution option you chose. There is not a single, simple answer to cover all cases.
.:|:.:|:. tim

How to interface a tuxedo app with another application that uses tcp/ip socket messaging

How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

You can make an empty server only with tpsvrinit that starts your client
listeners and a tpsrvdone that stops them. Be carefull with sharing ipcs
between processes, or your clients may get puzzled!!!
Another choice can be builting a custom WSL/WSH but I haven't done
this yet and I don't know exactly the troubles related with making them.
R.G.
Travis Ward wrote:
How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

How do I create a slideshow with selected photos on my iPad2

I want to create a slideslow using selected photos (not all photos) from the photos that I've imported to my iPad. Can you tell me how to do this?

You will need to use the computer that you sync with, running the most recent version of iTunes. Connect the iPad to the computer, click on the iPad name on the left, click on the Summary Pane of the iTunes window on the right, and then click on the Check for Update button.
This explains it as well.
http://support.apple.com/kb/HT4972
You can use any computer to update, but you will lose everything that you have on your iPad, so that's why you really should use your own syncing computer.
I recommend this as well ....
What you should do anytime that you update the device is to transfer purchases from the iPad into iTunes - File>Transfer Purchases - and you should backup the iPad as well. When you update the update the device, if something goes wrong, you can restore from the backup.
However, iTunes should ask if you want to backup before you update, but just in case create the backup yourself before you update. The backup contains your app data and settings - along with other items - so make sure you backup first.
If you have any other important files, you may want to transfer them to your computer as well, prior to the update.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup
http://support.apple.com/kb/HT1766

How to solve Windows 7 issues with Acobat X?

Hello
I hope someone can advise how to deal with the following errors:
i. In Windows 7 Explorer, I somtimes have context menu options for 'Convert to Adobe PDF' and 'Convert to Adobe PDF and email'. Both these options give ask me to select a target file name and then give message concerning missing PDFMaker. Should I have PDFMaker or not by virtue of having Acrobat X? If not can I remove these menu options?
ii. In Windows 7 Explorer, I also have context menu option 'Combine supported files in Acrobat'. But again, with Office 2010 this fails because 'Windows cannot find Acrobat.exe'. Why is this if Acrobat X is installed?
iii. Also, in Office 2010 itself, there is an Adobe tag on the ribbon which fails. Presumably it is related to the above. Should this work or can I disable it?
I'm using Office 2010 Pro on Windows 7 Pro. I have Acrobat 10 installed and also CS4.
Thanks
Martin O'Shea.

I tried repairing the Acrobat X installation but to no avail so any other advice is welcome.
I have disabled the add in in Office 2010 though.

In BEx, how to display hierarchy Upper Node with selected Lower Nodes only

Currently I am displaying the Cost Centre (GFL Responsibility Cost Centre) hierarchy in a workbook. I want to be able to filter on this hierarchy dynamically. E.g. the upper node must be displayed including the rolled up results for this node, together with a selection of the lower nodes e.g 2 nodes ( not all the lower nodes related to the upper node must be displayed in the query).
What's possible when filtering :
To filter on the 2 lower nodes only ( results are displayed as required)
Not possible:
When I include the higher node of the 2 lower nodes in the query, All the lower nodes of the higher node are displayed, and the filter selection of the lower nodes are over written.
This is logically what's expected when the higher node is included in the filter.
Creating a hierarchy variable gives the same problem, I am not able to filter on the hierarchy nodes as required.
 Upper Node
 Lower Node1 LowerNode2 LowerNode3
Filter the report for UpperNode and LowerNode 2 & 3 only
Thanking YOU in advance. Will reward points for the correct help

Hi
Do you want to show particular node or particular level ?
If you want particular node , then create hierarchy node variable and restrict to that node ( 3rd node)
If you want particular level, what does that mean say i am taking employee hierarchy and the hierarchy is as below.
Ihe setting that we have is to expand upto n levels but if yiou say i need level 2 what does that mean and how do you want to show in report ?
 A -
(level 1)
 B,C,D( --child of A ) --- level 2
 E(Child of B), F(Child of C) -
level 3.
Regards
vamsi

How to lock windows 8.1 with selected applications

Similar Messages

Maybe you are looking for