How to log in to Service Desk to create sample message to SAP?

Dear all,
How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
Regards
GN

Hi GN,
You have different options to create messages in test component SV-SMG-SUP-TST:
1. if you are on 7.1 you can create message using CRM_UI
2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
Thanks
Regards,
Vikram

Similar Messages

Service desk error creating support message "help- create support message"

Hi
I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
In order solve the error I review:
- The satellite SAP system is at the iBase installed components.
- I've Assign Number Range for ABA notifications at SLF1 transaction.
- I've Checked number range for Service Desk Message at SLFN transaction.
- I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
- (satellite system) Transaction sm30, table BCOS_CUST:
   Appl.            +       Dest.                                  +                     +
   OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
   TST_CUS                                                        0120009939
   RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
- (satellite system) I logged with a SAP user with these roles:
SAP_SUPPDESK_CREATE
SAP_BC_CUS_CUSTOMIZER according SAP NOTE 834534
SAP_BC_CUS_ADMIN       according SAP NOTE 834534
SAP_SV_FDB_NOTIF_BC_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
All these roles are mantained.
- I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
Please could you help me?
Thanks and Regards
Raul

Hi,
When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
========================================================================
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          10.07.2008 10:17:26
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" " "
    "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
    "PROFILE_CONTAINS_PARTNERDEP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
Information on where terminated
    Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
     in "PROFILE_CONTAINS_PARTNERDEP".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 41
    of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
=========================================================================
Thanks and Regards
Raul

Service Desk: error while sending message to SAP

Hello Gurus,
I have configured Service Desk in Solution Manager. When i create a message in one of my Satellite Systems the message appears in Solman but when i try ro send the message to SAP i get the following error.
"You do not have authorization to Send or Compare a notification"
The user has SAP_ALL and NEW and the same has been maintained in AISUSER table. After i get the error i executed SU53 but there are no missing authorization.
Can someone please tell me what the problem could be?
Regards
Anil Verma B

Hi,
Apart from the SAPOSS, SAP-OSS, SAP-OSS-LIST-01 rfcs, pls ensure the basic authorizations for solman has been verified and given.
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
Please also verify if you had the BADI settings done correctly as per note
1140822 SAP customer number for installation number &1 unkn
Hope this helps.
Cheers
Sh

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How to create system message in SAP EP?

Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1

Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal

How to analyze and evaluate Service Desk Tickets

Hi folks,
we are running SolMan 4.0 SP12 and I implemented Service Desk as well as ChaRM.
For ChaRM I copied SDHF (Urgent Correction) to ZDHF (does not work properly right now, but I won't give up on that..).
My question: how do I evaluate those processes? For example it would be nice to know..
- how long has it has taken to solve a problem?
- how much cost was generated?
- does the Support Team work efficient?
- where are the bottlenecks in the whole workflow system?
Are there any transactions who deal with the given information to answer those questions? Maybe in a management-friendly way?
If not, does anybody know in which tables this information is saved?
I was searching over and over but it is very hard (impossible?) to gather relevant information concerning SolMan. Forum Points will be rewarded as a matter of course!

Hey Dirk,
You need to go for some Zdevelopments to suit your requirement...
There is SAP Standard report named RDSWP_REP_SERV_DESK, it can be used for various Type of analyses....
Just try out and let me know if this is helpfull..
There are no other Standard reports which would do this for you..
Let me know how it goes...
And plz reward for usefull post...
Regards,
Anand....

How to give the replay service desk messages

Hi Gurs,
I configured the service desk , now i am able to see the satilite system messgages in crm_dno_monitor , but how can i give the replay to the message please help me .
cheers

Hi Gopal Rao,
As per your Message I came to know that you want to send a reminder / reply to the message creator (Key User) about the Status of the Message he created.
If you are looking for the above then you need to creat a smartform (mail form) and assign to the action definition as smart mail.
In the T.code SPPCADM go to the Application and the action profile - Action definition - E-mail to Msg Creator - Processing Type - Smart Forms Mail form Name: CRM_SLFN_ORDER_SERVICE_01 (Standard) copy the mail for as per your requirements (T.code- SMARTFORMS) do changes and save it and assign in the above said action definition with the condition.
Hope this will address your message.
Regards,
44040

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

Settings / iCloud on the iOS device to view your settings and options.
Storage & Backup / iCloud Backup is how you restore the device with your last backup.

Service Desk: Error in local message system: You do not have authorization

Hello experts,
i'm configuring support desk scenario. I think all is fine, but, when i try to create a message from satellite (R3 46C) to my SOLMAN the following error appears:
Error in local message system: You do not have authorization to create a notifica Message was not created. (Message no. B~ 088)
The user i use to create the message has the following roles:
SAP_SV_FDB_SUPPORT_LINE_ADMIN
SAP_SV_FDB_SUPPORT_LINE_LEVEL1
SAP_SV_FDB_SUPPORT_LINE_LEVEL2
Z_RFC
and SAP_ALL SAP_NEW profiles.
Anyone knows where is the problem?
Regards
Carlos Calle

Hi Carlos,
Role that allows processing messages is SAP_SUPPDESK_PROCESS. However from what I have understand, once End User enters and submits the message, he/she cannot edit the message anymore. Probably an email will be generated to him/her to notified of the message creation and for futher updates. I think end user should not be required to logon to Solution Manager. Key User i.e. helpdesk or SAP support staff will process(edit/change) the message instead.
If you want something else, I think you need to create a customise role maybe from SAP_SUPPDESK_DISPLAY or PROCESS and change the authorization values.
The below note contains latest authorization info.
Note 834534 - SAP Solution Manager roles in Release 4.0
Experts,
Correct me if I am wrong.
Regards,
Annie

How to create general message in sap screen for all users

Hi Forum
I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc)
Can anyone show me how to do this and also i want to know what is sm02 is used for?
Regards
Friend

You can do this by creating a message at the logon screen
Read SAP Note 205487
SM02 is used to send system messages like prior a system downtime or a scheduled maintainance, etc.
regards
Juan

How to log on to visual admin and create destination service

Hi all,
I see this statement everywhere while trying to configure adobe forms.
*it was only the HTTP destination FPICF_DATA_<SID> that was not created in the Visual Admin under Cluster -> Services -> Destinations*_
I got 2 questions here:-
1. the programs "FP_CHECK_DESTINATION_SERVICE" runs fine w/o destination check box. andwith the check box it gives the error "ADS: Request start time: Thu Nov 26 12:07:42 ........". SO how to resolve this. I have checked the blogs before and I did everything so far and stuck at the statement given above in bold.
2. What is this destination fp_icf_data_sid........... where to look for, I understand u need to log on to visual adm. But how is there a sap transaction "AL11" or from the web url. if it is web url ... "http://server_name:port/ ....." then I am lost after this I dont see anything called cluster and services anywhere....
And if am looking for visual admin at wrong places please provide step by step guide. I have seen steps to log on to visual admin on wesites but i dont know what am i doing, thats not clear. If someone can help from here.
Thanks,
Anu.

The Visual Administrator is a Java tool installed during the installation of a Java AS. It is a separate tool that can be copied and used remotely if desired. On a system running Java AS it can be found under /usr/sap/<SID>/JC00/j2ee/admin - just run 'go' under Linux/Unix or 'go.bat' under Windows. You must have Java installed on your remote system.
Once you have logged into your Java AS system using the Visual Administrator you can then setup your "Destinations", located under Server -> Services.
Check Note 944221 - Troubleshooting if problems occur in forms processing ...which will make clear the errors you are experiencing and help you solve them.
Nelis

How to log when windows service is being stopped by server restart c#

I want to handle when windows service is killed by task manager or by system restart.
I tried using below handler inside Timer_Elapsed method of the service timer
public void Start()
AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException;
_myTimer= new Timer(10000);
_myTimer.Elapsed += OnElapsed;
_myTimer.AutoReset = false;
_myTimer.Start();
private void OnElapsed(object sender, ElapsedEventArgs e)
try
_myTimer.Stop();
//Work
finally
_myTimer.Start();
and even I have placed the same into Main() method of the console as I am using Topshelf for windows service.
static void Main(string[] args)
AppDomain.CurrentDomain.UnhandledException += CurrentDomain_UnhandledException;
var exitCode = HostFactory.Run(hostConfigurator =>
hostConfigurator.Service<MyService>(serviceConfigurator =>
serviceConfigurator.ConstructUsing(() => new MyService());
serviceConfigurator.WhenStarted(MyService => MyService.Start());
serviceConfigurator.WhenStopped(MyService=> MyService.Stop());
hostConfigurator.RunAsLocalSystem();
hostConfigurator.SetDisplayName("MyService");
hostConfigurator.SetDescription("MyService");
hostConfigurator.SetServiceName("MyService");
hostConfigurator.UseLog4Net();
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
File.AppendAllText(@"C:\Crash.txt", "Main Termination");
In either scenario the handler is not getting called when I kill the windows service process from task manager or system restart. Even TopShelf is not logging "UnhandledServiceException" exit code.
I have searched for all possible ways but no luck. Could any one please help me in this.
Thanks

Hello RamJS,
You could have a try to use the Process.Exited Event to handle such process end log:
https://msdn.microsoft.com/en-us/library/system.diagnostics.process.exited(v=vs.110).aspx
The Exited event indicates that the associated process exited. This occurrence means either that the process terminated (aborted) or successfully closed. This event can occur only if the value of the
EnableRaisingEvents property is
true.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to configure a new service in SICF & create a BSP Application within it

I created a service called zappl under the default_host. The goal is that new customer BSP applications be create within it. So, these applications don't get together with SAP applications (sap/bc/bsp).
However when I try creating an application, the system tries creating automatically a node in the SAP node (sap/bc/bsp). As I don't have permission in this node, the application isn't created.
In SE80, I put /zappl/ prefix before the name application, but the system didn't accept.
Does anyone work using that method?
Regards,
André

Sergi,
I've had asked them to give me permission, however the admin team wants to separate the customer applications from SAP applications, creating them in another node under the default_host root.
I have permission to create new nodes within node /zappl/. I created a node zbsp_test and defined CL_HTTP_EXT_BSP as handler. Then, I created an application called zbsp_test too, however I don't get link the application to the recent node. SE80 tries creating it in /sap/bc/bsp. I even tried put /zappl/ before the application name, but it is considered an invalid name.
Thanks for your suggestion.
Regards.

How to Create OSS Message to SAP??

Hi Experts,
I need to create OSS Message to SAP? could you please provide the related info??

Hi,
You need to go to link https://websmp202.sap-ag.de/support. Here you need to enter credentials without which you cannot proceed further. And after entering to this site, you need to create OSS notes according to it's Priority.
BR,
SG.

How to log in to Service Desk to create sample message to SAP?

Similar Messages

Maybe you are looking for