How to login with ddic in newly created client

dear all,
I am using SAP NETWEAVER 7.0 EHP1. I have created a client 400 in production and i want to login with ddic but i dont understand what will be the password for that.As for sap* is pass and for ddic=? . I also use 19920706 for ddic but still it is not allowing to log on.please tell me is it possible to log on with ddic in newly created client. and sap* is working but not ddic.
thanks

Dear Abhishek,
Before you proceed to Create Jobs & Positions first you check whether the Personnel Actions (PA40) is configured or not. Then after uploading the employeee master data you can proceed to other process.
if PA40 is not configured then Configure in SPRO using PA/PM/Customizing procudures/ Infotype Menus etc. You can also maintain user profile using Tcode. SU3.
All the best.
Rgds,
Vikrant

Similar Messages

  • How to get an alert when user login with "DDIC" in any of the systems?

    Hi all,
    Can it be possible when ever the user login with DDIC user  in any of the satellite system,can we we  get an alert -as DDIC login attempt in any system?
    Is this possiblem in CCMS or BPM or...?
    Regards,
    Neni

    Hi Srikrishna,
    Link which you have give is good.But when i login with DDIC i am not geting alerts and i am not able to add any satllites system to
    under Security node
    My configuration:
    Miximum values for list                               1 min
    When should an alert be triggered?
    From value                   Red               Severity      2
    Max. number of alerts for each message ID             50
    Max. number of lines to be saved                      50
    SM19
    Client     *                                                     Events
    User       DDIC selected -Dailog logon         Alll
                                           systmem
    Please help me.
    Regards,
    Swaroop

  • Default username and password for  newly created client in minisap

    Hi all,
              I am using the free SAP minisap provided by SAP. In this system i tried to create a user from tcode scc4 . when i try to login to the new client with the username SAP* and password minisap i am not able to login. What will be the default username and password for the newly created client in minisap.

    In the new installation
    The parameter
    login/no_automatic_user_sapstar is set to " 1"
    You create the parameter with value "0" & restart application server.
    & Try to login into New client as SAP* with password "pass" - ( For a Standard System) - I don't what will be the default password in minisap.
    Rgds
    PR

  • Can I use Solution Builder on newly created Client?

    Dear Experts,
    I have an existing SAP system and I created new client via SCC4 without doing any client copy (means it's blank).
    Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
    regards,
    Abraham

    Hi  Abraham,
    Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
    Yes, You can login to newly created client via SAP*. However, running or activation on empty client is not advisable.
    Please copy the Newly created client from 000 or 001 and start the activation.
    Refer to below link for SAP best practices Activation.
    http://help.sap.com/saap/sap_bp/HCM_ERP605_US/html/installation_page_EN_US.htm
    IMPLEMENT - Solution Builder Simplified path to activate SAP Best Practices.
    Graphical scenario selection; Standard scope templates 
    http://help.sap.com/bp_dm603/BBlibrary/General/SAP_Best_Practices_overview_EN.ppt
    Regards,
    Sravanthi

  • How to give access to user when he login with his credentials to create his own virtual machine

    Dear Experts ,
    In scvmm ..how we can allow an user to create his own VM with out providing him administrator rights...
    I am able to create machines with user accounts when I give Administrator rights only..and if i remove Administrator rights..i am gettting a message for user-"you cannot access the private cloud", where as If i give administrator rights to that
    same user , I can able to access private cloud and template for the user.
    Please suggest me and help with any useful link.
    Regards
    N.V.Srinivas ,
    [email protected]

    Self-Service user delegation
    SCVMM 2008 - 2008 R2:
    http://technet.microsoft.com/en-us/library/dd548291.aspx
    SCVMM 2012 - 2012 R2:
    http://technet.microsoft.com/en-us/library/gg696971.aspx
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • How to read status of a newly created notification

    Hello All,
    I have implemented a BTE for the event PM000010 - Update Notification.
    Now my problem is that I wish to read the existing statuses on the notification.
    This works fine if the notification already existed before.
    However, if the notification is newly created, then Function Modules STATUS_CHECK and STATUS_READ do not work.
    This is only if the notification is newly created.
    I am particularly interested to know if the status Notification In Process and Notification Completed are present on the order.
    How do I achieve this since STATUS_CHECK and STATUS_READ are not able to fetch the statuses when the notification is newly created?
    Thanks,
    Mithun

    hi
    check out the below details
    Where to get the table which is having user status with Notiifcation number.  (not the system status).
    By : Selva
    1. From table QMEL get OBJNR(object number) using the QMNUM( notification number).
    2. Using this OBJNR get STSMA( Status Profile) from table JSTO.
    3. Using the OBJNR get STAT(object status) from table JEST.
    You may/ may not get multiple object status for an Object number.
    System status number will start from E.
    User status number will start from I.
    4. To get the text of the status, use the status number (STAT) and STSMA to get the status text from table TJ30T.
    We have done this and working fine.

  • How to know which row is newly created in the table

    Hi all
    i have one classic table with a button to add new row.
    when page renders initially it displays some record .Here user can either update the previously existing record or may create new ones .
    after adding one more row when users submits it , in back-end i need to go thru all the rows in the view to do some validations .but i need to insert newly created row using API. how can i know which row haas been newly created,
    pls help

    you can know which row is new using different techniques at different places, depending where you want to do it.
    1. In AMImpl: if the PK column attribute of the row does not have a value, then you know this is a new row.
    2. In EOImpl: insertRow will be executed only if it is a new row.
    3. In Pl/SLQ package (if being called from EOImpl): You can check the creation_date or OVN for the row and determine if this is a new row.
    4. You can use the method mentioned in this thread
    Row Status Question
    Thanks
    Tapash

  • How outbound IDoc with Z segment is creating without using a program/FM?

    Hi,
    I am having an outbound IDoc with Z message type and segments.
    I need to find how this IDoc/ IDoc segment is getting created. I tried to find
    it using the segment’s where used list (in SE11- IDoc segment structure). But it
    is showing that the structure and fields are not used anywhere.
    How it is possible to create a Z segment in IDoc without
    using the corresponding structure in some program or function module?
    I have searched in google/scn for a solution, but didn’t find
    anything.
    Any one please helps me to find how this IDoc segment is
    populating?
    Regards,
    Dipin

    Hi Arthur,
    This IDoc is catering as part of a flow (Tcode IW21). I have
    set a break point in the function module ALE_IDOCS_CREATE and processed the transaction
    IW21, but the program didn’t stop in the break point, but the IDoc got created.
    Regards,
    Dipin

  • How to login with SAPCPIC userid

    Dear Sir/Madam,
    I have changed the Password for SAPCPIC in Development Server for 000,001 and 100 client.
    But when I tried to login in the Respective client with SAPCPIC userid, one message is comming "Login through Communication User "
    It is correct that I am trying to login as Dialog User. Then my Questions are as follwos:
    i) How I can Login in SAPICPIC userid with these three Client.
    ii) If I change the Password for SAPCPIC for these clients in Production Server, Will it affect the RFC functions of the systems ?
    Please Advice.
    Thanks and Rgds,
    Pranab

    Hi Das,
    How it can be possible to log on with SAPCPIC as communication user ?
    First you have to know what exactly means Communication user type.....and this is not possible to login with this type of user.
    Google USER TYPES IN SAP
    Regards
    Nick Loy

  • ODataModel.submitChanges() with two associated newly created entries

    Hello Community,
    I have this doubt,
    I have this entity 'Person' in NW Gateway, with:
    Id (PK)
    FirstName
    LastName
    And 'Relationship':
    Person1Id (PK)
    Person2Id(PK)
    ValidFrom
    ValidTo
    /Person1 (Association by Person1Id)
    /Person2 (Association by Person2Id)
    I create a new person with ODataModel.createEntry(/People, { FirstName : "Juan", LastName : "Duran" });
    But, what if I want to create a new 'Relationship' and two 'Person's INLINEd?
    Something like:
    var oContext = ODataModel.createEntry(/People, { FirstName : "Juan", LastName : "Duran" });
    ODataModel.createEntry('Relationships', { Person1: { FirstName : "Martha", LastName : "Argerich", Person2 : oContext.getObject() } });
    What I want to do, is associate two newly created Entries, and submit my changes and send the payload ONLY to /Relationships?
    What's the better practice?
    Thank you

    Hello Community,
    I have this doubt,
    I have this entity 'Person' in NW Gateway, with:
    Id (PK)
    FirstName
    LastName
    And 'Relationship':
    Person1Id (PK)
    Person2Id(PK)
    ValidFrom
    ValidTo
    /Person1 (Association by Person1Id)
    /Person2 (Association by Person2Id)
    I create a new person with ODataModel.createEntry(/People, { FirstName : "Juan", LastName : "Duran" });
    But, what if I want to create a new 'Relationship' and two 'Person's INLINEd?
    Something like:
    var oContext = ODataModel.createEntry(/People, { FirstName : "Juan", LastName : "Duran" });
    ODataModel.createEntry('Relationships', { Person1: { FirstName : "Martha", LastName : "Argerich", Person2 : oContext.getObject() } });
    What I want to do, is associate two newly created Entries, and submit my changes and send the payload ONLY to /Relationships?
    What's the better practice?
    Thank you

  • How to login with different User in Portal

    Hi Experts,
    My requirment is quite different here, I want to login with different user in single login.
    My senario is like this for your understading...
    First I have loged in with one user and go to the one customized screens where I have list of all the portal users in a drop down.
    Here I am selecting one User from the list and Click on Submit button...then new window should open with this(selected) user login...
    Can anybody suggest me that what I suppose to do this to achieve this.
    what are parameters new user expects for login?
    what 'll be my approach for this?
    Thanks in Advance,
    Vikas

    Hi Prem,
    Thanks for your answer...
    The URL..
    http://server:50000/irj/portal?j_user=QAEmEsLAComR&j_password=Pa$$word
    it works only when, do this on fresh browser .. if someone has already Logged in and then try to open with different user name then it won't work.
    if I'll change URL with other user in the same browser like this..
    http://server:50000/irj/portal?j_user=demouser&j_password=Pa$$word
    then shows only previous page.
    But my requirement is to open different user page from the already logon user.
    Thanks, Vikas

  • Problem in logging in to newly created client in IDES mySAPERP ECC 6.0

    Hi,
    I have installed IDES mySAP ERP 2005 ECC6.0 and using client 800.I want to make a copy of the client 800.I created a new client 910 using SCC4.When I try to login to 910 using SAP* and password PASS (I tried both upper case and lower case) it does not allow. I also tried user SAP* with master password, 06071992, 19920706 and also the userid: idadmin and password: ides123 .But nothing worked. So I cannot proceed further in copying the client from 800 thro' SCCL. Can any one pls let me know what is the login ID and password that I need to use to get into the newly craeted client 910?
    Thanks in advance,
    V. Revathy

    HI dear,
    before logging into newly created cllient 910 you have to change the activate the kernal user SAP*
    a) Set the profile parameter login/no_automatic_user_sapstar to 0.
    b) Restart the application server.
    c) Log on to the new client with kernel user SAP* and password PASS.
    now do client copy. after finishing client copy again deactivate the kernel user SAP*
    a) Reset login/no_automatic_user_sapstar to 1.
    b) Restart the application server.
    regards
    abuzar

  • How to deal with .csproj.user being created/modified by Visual Studio before the project is run?

    So, what is the problem?
    The problem is that Visual Studio considers .csproj.user a dependency of the project being run.
    Let us assume the following:
     - We have a freshly built solution containing a web application project `X` as the Start Up project. 
     - There are Silverlight applications served by the X web application.
     - There is no `X.csproj.user` file initially.
    Now consider the following flow of events:
     1. Open the solution in the Visual Studio
     2. Build.
     3. Run.
     4. A dialog is open to ask whether Silverlight debugging is to be enabled. Enable it.
     5. Stop the debugging session.
     6. Run again.
     7. Stop the debugging session.
     8. Run again.
    Assuming nothing is built at step 2 (because the solution is totally up to date), will there anything be built at steps 3 and 6?
    The answer is affirmative and here is why:
     - The X.csproj.user file is actually created by Visual Studio when the project is requested to run. What happens next is that the
    X.csproj.user file is considered a dependency of the project
    X by the Visual Studio. Being created just now the file is newer than the project binaries and so Visual Studio builds the project
    X. This explains why the project is built at step 3.
     - When we agree to enable Silverlight debugging Visual Studio records this agreement in the
    X.csproj.user file. So the file is modified again, after the project has started running. Restarting the debugging session is going to build the project
    X yet again, after all X.csproj.user is again newer than the binaries built a second ago. This explains why the project is built at step 6.
    Fortunately, nothing is built at step 8.
    Call me petty, but I want to avoid the builds at steps 3 and 6. The problem is that I am not allowed to check in the X.csproj.user file, because that is likely to create a mess with people accidentally checking in their private changes.
    On the other hand, I am unable to move its default content (along with the agreement to enable Silverlight debugging) into the project file
    X.csproj. Well, I can, but it is just being ignored.
    So, here is my question - is it possible to separate the content stored in a
    .csproj.user into two groups:
     - Permanent. These are the things I would love to have in the .csproj file. It will be checked in.
     - Temporary/Private. These are the things private to individual developers. Never checked in.
    Visual Studio already allows this separation for certain properties - see the
    Apply server settings to all users (store in project file) checkbox in the Web properties tab of a Web application project - http://olalalittlen.wordpress.com/2011/07/20/vs-tips-managing-server-settings-in-web-projects-for-multi-developer-scenarios/.
    However, it is insufficient.
    Any other ideas on how to prevent the aforementioned redundant builds are welcome too.

    Hi Mark,
    I think your issue is more about project itself. the saved information in the .csproj.user settings is about the project's information.
    So I suggest you post your issue to the related project forum.
    web forms:http://forums.asp.net/18.aspx/1?Web+Forms
    mvc:http://forums.asp.net/1146.aspx/1?MVC
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I auto save all newly created contacts to a pre-determined group in Maverick? Could do this on iTunes, can't do it on iCloud...

    Hi,
    Before upgrading to Maverick, I used to sync all my contacts via iTunes.
    iTunes used to have an option to "Add contacts created outside of groups on this iPhone to: (drop-down)".
    I had created a group called ' RECENTLY ADDED ', so that every time I saved a new number whilst meeting people / networking, etc, it would auto-save to that group. I would then sync via iTunes, and voila- all my new contacts would be in there.
    As a marketer, I allocate my contacts into various complicated groups... so from there, I would proceed to move each contact into their relevant group, and then 'delete' from group (not delete completely). I would repeat this step until all contacts were moved out, leaving an empty 'recently added' group.
    The next time i was out networking/saving new numbers, the process would repeat...
    Now that I have upraded to Maverick and using iCloud syncing, I cannot find this feature.
    The previous method I used worked brilliantly, and I do not always have time to add notes, etc (for a smart group) when saving new numbers.
    I'm struggling to find a solution now that I'm using the iCloud syncing service...
    Any suggestions to make it easy??

    If the information is in iTunes on the computer you have synced with in the past another sync, being sure you select the items you want on the iphone, should copy those things back to the iPhone.

  • JPA - Problem with editing the newly created Entity

    Hi,
    I am new to JPA technology.
    I am having the Groups and Program table externally linked by GroupsProgams table of relationship many to many.
    My requirement is:
    while editing a group, i need to update group and associated GroupsPrograms based on the programs selected for this group.
    my code for edit group is:
    try {
                userEntityManager.getTransaction().begin();
                List<Program> programList = new ArrayList<Program>();
                for (Integer programId : assignedProgramList) {
                    programList.add(new Program(programId));
                group.setAssociatedGroupProgramsList(programList);
                userEntityManager.merge(group);
                userEntityManager.getTransaction().commit();
            } catch (Exception e) {
                throw new Exception("GROUP_ASSOCIATION_ERROR", e.getMessage());
            }While editing the existing group this code is working fine.
    But when i create a new group with some programs assigned to it then after some times editing the new group and adding some more programs to group is giving error:
    please suggest me where its going wrong. because its working fine for the already existing groups but not for the new ones.
    javax.persistence.RollbackException: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 9.1 (Build b36-rc)): oracle.toplink.essentials.exceptions.DatabaseException
    Internal Exception: com.mysql.jdbc.exceptions.MySQLIntegrityConstraintViolationException: Duplicate entry '40-2' for key 1Error Code: 1062
    Call:INSERT INTO groupsprograms (GP_PR_Id, GP_GR_Id) VALUES (?, ?)
            bind => [2, 40]
    Query:DataModifyQuery()
            at oracle.toplink.essentials.internal.ejb.cmp3.transaction.base.EntityTransactionImpl.commit(EntityTransactionImpl.java:105)
            at oracle.toplink.essentials.internal.ejb.cmp3.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:45)
            at com.ecs.usermanagement.bl.UserManagerData.editGroup(UserManagerData.java:196)
            at com.ecs.usermanagement.ui.UserManagerView.saveGroup(UserManagerView.java:1580)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.jdesktop.application.ApplicationAction.noProxyActionPerformed(ApplicationAction.java:776)
            at org.jdesktop.application.ApplicationAction.actionPerformed(ApplicationAction.java:812)
            at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
            at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
            at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
            at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
            at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
            at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
            at java.awt.Component.processMouseEvent(Component.java:6038)
            at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
            at java.awt.Component.processEvent(Component.java:5803)
            at java.awt.Container.processEvent(Container.java:2058)
            at java.awt.Component.dispatchEventImpl(Component.java:4410)
            at java.awt.Container.dispatchEventImpl(Container.java:2116)
            at java.awt.Component.dispatchEvent(Component.java:4240)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
            at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
            at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
            at java.awt.Container.dispatchEventImpl(Container.java:2102)
            at java.awt.Window.dispatchEventImpl(Window.java:2429)
            at java.awt.Component.dispatchEvent(Component.java:4240)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)Thanks,
    DAYA

    Hi,
    I am new to JPA technology.
    I am having the Groups and Program table externally linked by GroupsProgams table of relationship many to many.
    My requirement is:
    while editing a group, i need to update group and associated GroupsPrograms based on the programs selected for this group.
    my code for edit group is:
    try {
                userEntityManager.getTransaction().begin();
                List<Program> programList = new ArrayList<Program>();
                for (Integer programId : assignedProgramList) {
                    programList.add(new Program(programId));
                group.setAssociatedGroupProgramsList(programList);
                userEntityManager.merge(group);
                userEntityManager.getTransaction().commit();
            } catch (Exception e) {
                throw new Exception("GROUP_ASSOCIATION_ERROR", e.getMessage());
            }While editing the existing group this code is working fine.
    But when i create a new group with some programs assigned to it then after some times editing the new group and adding some more programs to group is giving error:
    please suggest me where its going wrong. because its working fine for the already existing groups but not for the new ones.
    javax.persistence.RollbackException: Exception [TOPLINK-4002] (Oracle TopLink Essentials - 9.1 (Build b36-rc)): oracle.toplink.essentials.exceptions.DatabaseException
    Internal Exception: com.mysql.jdbc.exceptions.MySQLIntegrityConstraintViolationException: Duplicate entry '40-2' for key 1Error Code: 1062
    Call:INSERT INTO groupsprograms (GP_PR_Id, GP_GR_Id) VALUES (?, ?)
            bind => [2, 40]
    Query:DataModifyQuery()
            at oracle.toplink.essentials.internal.ejb.cmp3.transaction.base.EntityTransactionImpl.commit(EntityTransactionImpl.java:105)
            at oracle.toplink.essentials.internal.ejb.cmp3.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:45)
            at com.ecs.usermanagement.bl.UserManagerData.editGroup(UserManagerData.java:196)
            at com.ecs.usermanagement.ui.UserManagerView.saveGroup(UserManagerView.java:1580)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.jdesktop.application.ApplicationAction.noProxyActionPerformed(ApplicationAction.java:776)
            at org.jdesktop.application.ApplicationAction.actionPerformed(ApplicationAction.java:812)
            at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
            at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
            at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
            at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
            at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
            at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
            at java.awt.Component.processMouseEvent(Component.java:6038)
            at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
            at java.awt.Component.processEvent(Component.java:5803)
            at java.awt.Container.processEvent(Container.java:2058)
            at java.awt.Component.dispatchEventImpl(Component.java:4410)
            at java.awt.Container.dispatchEventImpl(Container.java:2116)
            at java.awt.Component.dispatchEvent(Component.java:4240)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
            at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
            at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
            at java.awt.Container.dispatchEventImpl(Container.java:2102)
            at java.awt.Window.dispatchEventImpl(Window.java:2429)
            at java.awt.Component.dispatchEvent(Component.java:4240)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)Thanks,
    DAYA

Maybe you are looking for