How to loop through attributes

Im trying to loop through some XML and use the two attributes
name and href for each button im creating. so far all I have been
able to do is onfuse myself, well not totally - I can pull the
first name attribute from the firstChild. But I have not been able
to successfully assign it to a button. I took out my button code as
it was probably wrong. Heres what Ive tried...

The arrays are built in an event, so before that event
happens, they are undefined. After the event, you can access the
arrays as usual. The trace(menus); call is before the
myXML_xml.load("menu2.xml"); line, which triggers the loading, so
it can't trace any values. It also wouldn't trace anything when
placed directly after the load() call, because the loading will
take some time until all data is loaded and the onLoad event is
fired. That makes it a bit hard to use the data outside the event,
because you must assert that it's loaded when used. The onLoad
event is just perfect for that, so it should be done there, just
after the loop through the xml nodes.
For the submenus, the attached code will place the childnode
data in subMenus. The arrays must be declared outside the event,
otherwise they get deleted when the event finishes.
cheers,
blemmo

Similar Messages

How to loop through Multiple Excel sheets and load them into a SQL Table?

Hi ,
I am having 1 excel sheet with 3 worksheet.
I have configured using For each loop container and ADO.net rowset enumerator.
Every thing is fine, but after running my package I am getting below error
[Excel Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may
be error messages posted before this with more information on why the AcquireConnection method call failed.
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified
in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
[Connection manager "Excel Connection Manager"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "The Microsoft Access database engine cannot open or write to the file ''. It is already opened exclusively by
another user, or you need permission to view and write its data.".
Pleas suggest me the correct way of solving above issues.
Thanks in advance :)
regards,
Vipin jha
Thankx & regards, Vipin jha MCP

Hi ,
Please refer the below link for Looping multiple worksheet in a single SQL Table.
http://www.singhvikash.in/2012/11/ssis-how-to-loop-through-multiple-excel.html
Note:-If you using excel 2010 then you have to use EXCEL 12.0 .
Above link explaining step by step of Looping multiple worksheet in a single SQL Table.
regards,
Vipin jha
Thankx & regards, Vipin jha MCP

How to loop through a collection of records which is return value of func.

Hi all.
Have this situation:
- Stored function (member of pkg procedure) that returns a collection of records.
Package Spec:
=========
type tipo_pvt is table of s08_plan_venta_totalizado_r % rowtype;
rc_pvt tipo_pvt;
(s08_plan_venta_totalizado_r is a view).
Package Body:
=========
select col1
,col2
,etc
bulk collect into rc_pvt
from s08_lista_precio_producto_r lpp
,s03_producto_r prd
where condition;
return rc_pvt;
Once collection is loaded and returned (i know it loads records). I just want to loop through every record on a pl/sql procedure on the client (forms6i procedure), but it gives me the error: ORA-06531 Reference to uninitialized collection:
On the forms6i client procedure i have something like:
procedure p_carga_plan_venta_inv (p_id_plan_venta in number) is
v_contador integer;
v_mensaje varchar2(10);
rc_pvt sk08_gestiona_plan_venta.tipo_pvt; (sk08_gestiona_plan_venta is package name)
begin
     rc_pvt := sk08_gestiona_plan_venta.tipo_pvt();
     rc_pvt := sk08_gestiona_plan_venta.f_genera_plan_venta_inv (:pvv.lip_id_lista_precio
,:pvv.ems_id_sucursal
                                        ,:control4.v_metodo_calculo
,:pvv.unm_co_unidad_monetaria
,:pvp.fe_fin_periodo) ;
-- previous statement dos not fail BUT THIS:
message('rc_pvt.count= '||rc_pvt.count);pause;
DOES FAIL
end;
So my question is : since i have already returned the collection, how come is not initialized....?
Do i have to extend it first? In this case i have to return the number of records in the collection.....
Look what happen when done from sqlplus:
declare
rc_pvt sk08_gestiona_plan_venta.tipo_pvt;
begin
rc_pvt := sk08_gestiona_plan_venta.tipo_pvt();
rc_pvt :=
sk08_gestiona_plan_venta.f_genera_plan_venta_inv (8713171
,null
,'m'
,'BS.F'
,to_date('28/02/2001','dd/mm/yyyy'));
end;
SQL> /
Registros en la coleccion =6
Procedimiento PL/SQL finalizado con éxito.
SQL>
I put a dbms_output.put_line on stored function .....
Please help ....!
Apparently it fails when calling the stored function:
rc_pvt := sk08_gestiona_plan_venta.f_genera_plan_venta_inv (:pvv.lip_id_lista_precio
,:pvv.ems_id_sucursal
,:control4.v_metodo_calculo
,:pvv.unm_co_unidad_monetaria
,:pvp.fe_fin_periodo) ;
I don't undestand since this function return the appropiate type. It seems the collection is empty, although having test that on sqlplus works ...
rc_pvt := sk08_gestiona_plan_venta.f_genera_plan_venta_inv (:pvv.lip_id_lista_precio
,:pvv.ems_id_sucursal
,:control4.v_metodo_calculo
,:pvv.unm_co_unidad_monetaria
,:pvp.fe_fin_periodo) ;
function f_genera_plan_venta_inv (p_id_lista_precio in number
,p_id_sucursal in number
,p_tipo_nivel_inv in varchar2
,p_co_unidad_monetaria in varchar2
,p_fe_fin_periodo in date) return tipo_pvt;
for some reason it works on plus:
SQL> declare
2 rc_pvt sk08_gestiona_plan_venta.tipo_pvt;
3 begin
4 rc_pvt := sk08_gestiona_plan_venta.tipo_pvt();
5 rc_pvt :=
6 sk08_gestiona_plan_venta.f_genera_plan_venta_inv (8713171
7 ,null
8 ,'m'
9 ,'BS.F'
10 ,to_date('28/02/2001','dd/mm/yyyy'));
11 --
12 dbms_output.put_line('Registros en la coleccion = '||rc_pvt.count);
13 for i in 1 .. rc_pvt.count loop
14 --
15 dbms_output.put_line('En '||i||rc_pvt(i).prd_co_producto);
16 end loop;
17 end;
18 /
Registros en la coleccion =6
Registros en la coleccion = 6
En 1PT.REF.PET.KO05
En 2PT.REF.PET.LM15
En 3PT.ALM.VDR.001
En 4PT.REF.GRN.CN
En 5PT.REF.GRN.KO
En 6PT.REF.GRN.LM
Procedimiento PL/SQL finalizado con éxito.
Don't understand why it works on plus8 (same version that comes with 6i).
Can't loop through records on forms...? WHY ...?
Edited by: myluism on 02-abr-2012 14:40

Forms 6i is an antique ... write your code to run on the server.
Multiple examples of how to loop through an array loaded with bulk collect can be found here.
http://www.morganslibrary.org/reference/array_processing.html
The main library page is:
http://www.morganslibrary.org/library.html

How to loop through a single row of data?

What I'm trying to do is use a cursor to loop through a clob. When I create my cursor I get the an error telling me that the table does not exist. Which implies that I have an implicit cursor. Is there a way to get around this?

> How to loop through a single row of data?
By not looping as there is only a single row?
> What I'm trying to do is use a cursor to loop through a clob
Processing (looping through) a CLOB has nothing to do with a cursor.
> When I create my cursor I get the an error telling me that the table does
not exist. Which implies that I have an implicit cursor.
Incorrect. It simply means that
a) you do not have permissions to access that table from within the current context
b) it does not exist (e.g. you have misspelled the object name, you have not qualified it properly within the current scope, etc)

How To Loop Through GregorianCalendar ?

I wonder if anyone knows how to loop through GregorianCalendar , such as :
GregorianCalendar Start_Date,End_Date;
Start_Date=new GregorianCalendar(2000,Calendar.DECEMBER,25);
End_Date=new GregorianCalendar(2006,Calendar.DECEMBER,25);
for ( GregorianCalendar Day_Index=Start_Date ; Day_Index<End_Date ; Day_Index++ )
Thanks
Frank

for ( GregorianCalendar Day_Index=Start_Date ;
Day_Index<End_Date ; Day_Index++ )
Day_Index.add(Calendar.DATE, 1);

How to Loop through App and finding popup Windows

Does anyone know how to loop through the app and find any
popup windows..

I guess application by default creates a SystemManager
object... So i used
this.systemManager.popUpChildren.numChildren and it gives me
0 all the time.. even though I have instances of windows to the
app.. According to the documentation this should give you the
number of popup children but it doesn't.. Any more ideas?

How to loop through an associative array

Guys,
How to loop through an associative array. where the key is string but the value is an object
-Thanks

It depends if you are using a Java HashMap or a BPM Associative array. You'd use the "keySet" if for the former and the "keys" if it's the latter.
I know you want an object for the array, but Any[String] is used here just so you can see something coming back in the display statements shown below. Remove the input and display statements - they're just in there so you can see something working.
Here's how to go through a Hashmap's array using a loop:
map as Java.Util.HashMap
map.put(1, "One")
map.put(2, "Two")
map.put(3, "Three")
map.put(4, "Four")
map.put(5, "Five")
display map.keySet
for each item in keySet(map) do
     display item
     display get(map, arg1 : item)
endHere's how to go through an associative array using a loop:
hashMap as Any[String]
hashMap = ["One": 1,"Two":2]
for each item in hashMap.keys do
     display item
     display "Item in the array is: " + hashMap[item]
endDan

How to loop through a KM Folder ?

Hi ....can someone please let me know how to loop through a KM Folder having many documents , files etc .
Waiting for replies !!
Regards
Smita

Hi Smita
Here is the code:
String rLocationtest = "/documents/Folder1";
IResourceContext c = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
ICollection collection = (ICollection)ResourceFactory.getInstance().getResource(RID.getRID(rLocationtest),c);
loopFolder(collection,c);
public void loopFolder(ICollection collection, IResourceContext c){
         try{
         IResourceList resList = collection.getChildren();
     IResourceListIterator resItr = resList.listIterator();
             while(resItr.hasNext()){
          IResource restemp = resItr.next();
          if(restemp.isCollection() && LinkType.NONE.equals(restemp.getLinkType())){
                         loopFolder((ICollection)restemp,c);
                                //If the restemp is not a collection, it is a resource.
                                //Do the resource related operations here.
     }// End of while
         }catch(Exception e){
              e.printStackTrace();
    }//End of loopFolder
Hope it helps
Thanks
Deepak

How to loop through the "On My Mac" folders in mail?

Hi there - i am new to applescript, but am slowly working out how to use it.
I am stumped on how to write a rule that will move a message to a folder identified by a tag in a message (I am using MailTags).
I have script that will take the first tag and move the message to a mail folder in a fixed location (e.g. Archive/<tag name>) however I wanted to make it more generic by looping over all of my mail folders and finding one that matched the tag name.
However I am stumped on how to loop over all of my mail folder names - I have tried:
repeat with aFolder in (every mailbox of (mailbox for "ON MY MAC"))
and
repeat with aFolder in every mailbox of inbox
etc.
but none of these seem to work.
Is there some magic syntax to do this, so that I can do:
if (name of aFolder = msgTag) then
move oneMessage to mailbox (name of aFolder)
end if
Tim

You don't necessarily need to assign a variable to the entire list in order to loop through them (unless you really want to) - for example:
tell application "Mail" to repeat with aFolder in (get mailboxes)
-- do stuff with aFolder
end repeat
There are several AppleScript resources, but the main ones I use are:
AppleScript Language Guide
AppleScript Tutorials at MacScripter.net

How to Loop through another list and update a column with SharePoint Designer 2013 Workflow

Hi,
I am trying to get my head around the new 2013 Workflow Engine and SharePoint Designer 2013 Workflow Text-Based Designer.
I have two lists.
List A has 2 columns: Title, Completed (Yes/No)
List B has 3 columns: Title, LookupListATitle, Completed (Yes/No)
All the 2013 Workflow components have been installed and configured and I am selecting the 2013 Workflow option in SPD
I am trying to set off a 2013 Workflow when an item in List A is edited to Loop through List B and select items where the LookupListATitle column's value is equal to the Title value of the current item, and set the value of the Completed column for those
items in ListB to "Yes".
I have the Workflow configured like this:
Stage: Stage 1
IF Current Item:Completed equals Yes
Loop: 1
The contents of this loop will run repeatedly while: ListB:LookupListATitle equals Current Item: Title
Update item in ListB.
(The dialog options for the update item action as follows:
List: ListB
Field: Completed, Value: Yes
In the Find the List Item section
Field: LookupListATitle
Value: Current Item: Title)
Transition to stage
Go to End of Workflow
When I update an item in ListA and set its Completed column to Yes, I would expect the Workflow to find all the items in List B where the Lookup column is equal to ListA's Title (there are 2) and update their Completed column to Yes. But it doesn't work.
When I look at the Workflow Status it says the Internal Status is "Canceled" and the information pop up has the following alien language (and may be truncated):
RequestorId: 95f03b62-8956-ac14-c5cf-dc98c89c589c. Details: System.ArgumentException: Invalid JSON primitive: Item001. Parameter name: value at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ConvertStringToJsonNumber(String value) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ReadPrimitive(String
type, XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(Stream jsonStream, Byte[] jsonBytes)
at Microsoft.Activities.DynamicValue.ParseJson(String json) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
Unfortunately I don't have access to the server, logs etc.
I would love to find some tutorials, or any books on SharePoint Designer 2013 in general and Workflows in particular but my searches haven't turned up much so far apart from a pre-release Beginning SharePoint Workflows which is in its very early stages and
not much help yet.
Can anyone give me some guidance on how to set up While Loops to iterate through a related list using SharePoint Designer 2013?
Mark

Hi,
I understand that you wanted to update the items in the other list (Participants) where the Course equals the Current Item.
You need to use “Call HTTP Web Service" action and “Build Dictionary" action to get the Maxid and then loop Participants to update the items.
You can follow the steps as below to achieve what you want:
Create a custom list named Courses, add columns: Title(Single line of text), Course ID(Single line of text), Course Finalised (Yes/No).
Create a custom list named Participants, add columns: Title(Single line of text), Course(Lookup), CourseFinalised (Yes/No).
Create workflow associated to Courses, start the workflow automatically when an item is created or changed.
Add conditions and actions:
The HTTP URL is set to
https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be order by Id and desc.
Then if Course Finalised is equal to Yes, the CourseFinalised of the associated items in Participants will be updated to Yes.
More information:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to loop through XML data in a table of XMLType?

Hi,
I am failry new to xml document processing in Oracle using PL/SQL.
My DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
I have successfully loaded an xml document into a table using the following two statements:
1) CREATE TABLE mytable2 OF XMLType;
2) INSERT INTO mytable2 VALUES (XMLType(bfilename('IMAGE_FILE_LOC', 'IFTDISB20100330172157C002.xml'), nls_charset_id('AL32UTF8')));
Now I need to traverse through the various nodes within the xml document and extract values of elements of each node. The question I have is:
How do I loop through a node? A VALID record is enclosed within the <checkItem> </checkItem> tags.
Here is a snippet of the data in that xml document:
++++++++++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8"?>
<bdiData>
<documentControlInfo>
<documentInfo>
<docDescription>Check images and data for Test Company, account number 1234567890</docDescription>
<docID>
<ID>20100330172157</ID>
</docID>
<docModifier>Test Company</docModifier>
<docCreateDate>2010-03-30</docCreateDate>
<docCreateTime>17:21:57-0700</docCreateTime>
<standardVersion>1.0</standardVersion>
<testIndicator>0</testIndicator>
<resendIndicator>0</resendIndicator>
</documentInfo>
<sourceInfo>
<sourceName>The Bank IFT</sourceName>
<sourceID>
<idOther>TheBankIFT</idOther>
</sourceID>
</sourceInfo>
<destinationInfo>
<destinationName>Test Company</destinationName>
<destinationID>
<idOther>FEI3592</idOther>
</destinationID>
</destinationInfo>
</documentControlInfo>
<checkItemCollection>
<collectionInfo>
<description>Items</description>
<ID>1269994919135</ID>
<Classification>
<classification>Items</classification>
</Classification>
</collectionInfo>
<checkItemBatch>
<checkItemBatchInfo>
<description>Paid Checks</description>
<ID>1269994919135</ID>
<Classification>
<classification>Paid Checks</classification>
</Classification>
</checkItemBatchInfo>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>86468</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>009906631032</seqNum>
<trancode>001051</trancode>
<amount>86468</amount>
<serialNumber>300040647</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003260000738400851844567205_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItem>
<checkItemType>check</checkItemType>
<checkAmount>045</checkAmount>
<postingInfo>
<date>2010-03-29</date>
<RT>10700543</RT>
<accountNumber>1234567890</accountNumber>
<seqNum>008518967429</seqNum>
<trancode>001051</trancode>
<amount>045</amount>
<serialNumber>200244935</serialNumber>
</postingInfo>
<totalImageViewsDelivered>2</totalImageViewsDelivered>
<imageView>
<imageIndicator>Actual Item Image Present</imageIndicator>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Front</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Front.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
<imageViewInfo>
<Format>
<Baseline>TIF</Baseline>
</Format>
<Compression>
<Baseline>CCITT</Baseline>
</Compression>
<ViewSide>Rear</ViewSide>
<imageViewLocator>
<imageRefKey>201003290000713900851896742901_Rear.TIF</imageRefKey>
<imageFileLocator>IFTDISB20100330172157M002.zip</imageFileLocator>
</imageViewLocator>
</imageViewInfo>
</imageView>
</checkItem>
<checkItemBatchSummary>
<totalItemCount>1028</totalItemCount>
<totalBatchAmount>61370501</totalBatchAmount>
<totalBatchImageViewsDelivered>2056</totalBatchImageViewsDelivered>
</checkItemBatchSummary>
</checkItemBatch>
<collectionSummary>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalCollectionAmount>61370501</totalCollectionAmount>
<totalCollectionImageViewsDelivered>2056</totalCollectionImageViewsDelivered>
</collectionSummary>
</checkItemCollection>
<documentSummaryInfo>
<totalCollectionCount>1</totalCollectionCount>
<totalBatchCount>1</totalBatchCount>
<totalItemCount>1028</totalItemCount>
<totalDocumentAmount>61370501</totalDocumentAmount>
<totalDocumentImageViewsDelivered>2056</totalDocumentImageViewsDelivered>
</documentSummaryInfo>
</bdiData>
++++++++++++++++++++++++++++++++++++++++++++++++
Any ideas and or suggestions will be greatly appreciated.
Cheers!
Edited by: user12021655 on Aug 3, 2010 1:25 PM

I really need to update my blog to get the example you are looking for posted. I did a quick search on the forums for XMLTable and found a good example at {message:id=4325701}. You will want to use OBJECT_VALUE in the PASSING clause where you need to reference the column in your table.
Note: See the FAQ in the upper right for how to use the tag to wrap objects to retain formatting. Also your XML is missing closing nodes.

How to loop through CSV file

Hi,
I want to loop through each column of a CSV file.
And while looping each column, I want to loop each row
starting with the 2st row.
I wrote the code as below, but it is looping through the rows
starting from row 1.
How do I make it start the loop as from row 2 in the CSV ?
(see code below)
Can someone tell me how to do this?
Thx

<cffile action="read" file="C:\Documents and
Settings\user\Desktop\EM-CSV\test.csv" variable="csvfile">

<table border="1">
<cfloop index="index" list="#csvfile#"
delimiters="#chr(10)##chr(13)#">

<tr>
<td><cfoutput>#index#</cfoutput></td>
<td><cfoutput>#listgetAt('#index#',2,
',')#</cfoutput></td>
<td><cfoutput>#listgetAt('#index#',3,
',')#</cfoutput></td>
</tr>
</cfloop>
</table>

Hello, your code works perfectly.
Now I am having a slight problem with it.
I have added the code to check whether a particular cell of
the CSV is blank. (see code below)
But it is giving me error message.
Can you please tell me what am doing wrong?
Thx

<cfset isRowTwoOrLater=false>
<table border="1">
<cfloop index="row" list="#csvfile#"
delimiters="#chr(10)##chr(13)#">
<cfif isRowTwoOrLater>
<tr>
<cfif #listgetAt(row,1, ',')# neq ''> 
<td><cfoutput>#listgetAt(row,1,
',')#</cfoutput></td>
<cfelse>
<td><cfoutput>It is
blank</cfoutput></td>
</cfif>
<td><cfoutput>#listgetAt(row,2,
',')#</cfoutput></td>
<td><cfoutput>#listgetAt(row,3,
',')#</cfoutput></td>
</tr>
<cfelse>
<cfset isRowTwoOrLater = true>
</cfif>
</cfloop>
</table>

How to loop through data of ALV grid in Webdynpro for Abap view

hello,
I have a view with an ALV component(SALV_WD_TABLE). I just want to loop through the lines shown (particularly when the user has set filter).
Can you help me to find how to reach the internal table ?
In summary, I want to know the reverse method of BIND_TABLE()
Thanks!

Not really...
Here is the solution :
DATA lo_ui TYPE if_salv_wd_table=>s_type_param_get_ui_info.
lo_ui = lo_interfacecontroller->get_ui_info( ).
DATA: lt_displayed TYPE salv_bs_t_int,
li_displayed TYPE int4.
lt_displayed = lo_ui-t_displayed_elements.
check not lt_displayed is initial.
loop at lt_displayed into li_displayed.
Regards

How to loop through a Data Node

Hello,
I have an Interactive Adobe form in WebDynpro Java project.
My data View tab includes the following structure:
Bapi_test
ValueHelpData
CodeNumber
CodeDescription
Can someone please tell how I can loop through the ValueHelpData node, and get values for CodeNumber and CodeDescription
The ValueHelpData node has the cardinality of 0..n. and has approximately 100 elements.
Thanks. Your help is much appreciated.
Rob.

Hi Robby,
You could try the following :
int n = wdContext.nodeValueHelpData().size();
for(int i = 0; i < n; i++)
   wdContext.nodeValueHelpData().moveTo(i);
   IPrivateMyDataView.IValueHelpDataElement ele = wdContext.currentValueHelpDataElement();
   String codenum = ele.getCodeNumber();
   String codedesc = ele.getCodeDescription();
   // Any other processing logic..//
Hope this helps.

Question on how to loop through a variable amount of objects

I have a csv file which I am parsing with powershell and it works perfectly. I would like to speed it up. Currently, I call a line that is customized for each groups list of subnets.
I have about 30 groups.
Some groups have one subnet, some have 5 subnets.
I want to set up some sort of loop to parse everything while executing a single Import-CSV. Currently I call Import-CSV once per group. It takes me about 2-4 minutes to parse the entire file depending on the speed of the machine.
The csv file has about 30,000 rows. I am not concerned about running out of resources. This is as much a learning challenge as a desire to make better powershell scripts.
Below is a portion of the one liner that would parse the entire csv file looking only for those items that match, and writing them out to that groups specific csv file.
Example #1
Import-Csv $HostList | Where-Object {$_."IP Address" -Match "^192.1.*" -or $_."IP Address" -Match "^192.2.*" -or $_."IP Address" `-Match "^192.3.*" .....}| do more stuff...
Example #2
Import-Csv $HostList | Where-Object {$_."IP Address" -Match "^192.7.*" ....}| do more stuff...
The example above is just a snippet from code that works perfectly.
The problem I am asking for help with is, when I loop through the items I am matching against (subnets), if one group has 3 items to match against, another has 1, another has 7, how do I set up such a loop?
Am I using some sort of 'while' $_."IP Address" or...?
Do I create a big 30,000 array (Does PS even use arrays?)
I would love to know what this type of looping is called, and what I can read with examples on how to understand approaching this challenge..
Thank you for any help.
-= Bruce D. Meyer

The reason for the parsing (I thought I explained it, must have been too vague) is I have about 30 agencies in a csv file.
Each agency can be determined by their subnet(s) and domain(s)
I need to put all lines in the csv relating to each agency in their own separate csv file to distribute to them so I am not sharing agency 'A' info with the other 29 agencies.
I get the regex comment. Thank you. For some reason I am rather hesitant to use PCRE under windows. I'll see how it works.
Your comment on "Reloading a large file repeatedly takes more time", is the exact reason why I asked the question. I want to get away from that.
I appreciate your quick reply, I think your example will work nicely.
-= Bruce

How to loop through attributes

Similar Messages

Maybe you are looking for