HOW TO LOWER THE NUMBER OF KBPS

I WANT TO SAVE UP SPCE IN MY iPod
HOW SHOULD I OPERATE IN ORDER TO LOWER THE NUMBER OF KBPS IN AN AUDIO FILE????

As Gerry says, you can't change your purchased songs without first burning them to CD and re-importing them at a lower bitrate so I would forget about them. For everything else you first need to change your import settings to the format and bitrate you want for your iTunes files. After that everything you import will use that setting. If you like, once you've done that you can convert your existing songs and the conversion will use the import settings you chose.
1 Open iTunes
2 Go to iTunes>Preferences>Advanced>Importing
3 Choose the format you want from the menu alongside Import Using, for instance AAC Encoder
4 Choose Custom from the Setting menu
5 In the dialog box that now appears, choose the Stereo Bit Rate you want from the list
6 Leave the remaining two boxes at auto and click OK
7 Click OK in the Advanced box to complete the setup
If you do convert your existing songs however you will end up with duplicates which you'll have to delete from the libray. To do this just go to the Library and sort your selection in "Bit Rate" order, that will allow you to quickly
identify the orginals. If Bit rate isn't a visible column in your Library then go to Edit>View Option and choose it from the list that appears.

Similar Messages

  • How can you lower the number of days in IOS8 iPhotos deleted

    In IOS8 photos deleted stay for 30 days. Can you lower the number of days?

    To answer your Subject (rather than the body of your post)
    To get the number of controls, and refs to each, etc, you can combine a
    couple of example VIs and a little index finger grease to make a VI that
    does what you want:
    Help menu >> Find Examples
    Find Example Dialog >>Browse tab
    Programmatically controlling VIs
    Manipulating Applications and VI settings
    Edit Multiple VI Setups.vi
    New Examples for LabVIEW 6.1
    Queues
    Queue Control Seek.vi
    If these two VIs are put in a mixer and shaken (not stirred) you might come
    up with something that tastes write.
    Mike Ashe
    "GL" wrote in message
    news:[email protected]..
    > I need to convert llb from 6i to 6.1 and I am unable to, I beli
    eve
    > because I have to many controls and indicators in the llb.

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • How to delete the number saved in CALL FORWARDING list?

    how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
    he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

    Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
    The image you have uploaded is unable to be displayed.
    Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
    It's advised you call your mobile service provider to further assist with this feature.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to find the number of data items in a file written with ArryToFile function?

    I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
    If you are young work to Learn, not to earn.
    Solved!
    Go to Solution.

    What about:
    OpenFile ( your file );
    cnt = 0;
    while ((br = ReadLine ( ... )) != -2) {
    if (br == -1) {
    // I/O error: handle it!
    break;
    cnt++;
    CloseFile ( ... );
    There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
    After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to find the number of links in a website

    hi every body
    can any one clear my doubt
    my doubt is that
    in a website how to find the number of links the hole website contains
    is there any navigation tool to find that
    plz help me yar
    i am waiting for the reply

    If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
    If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
    Hope this helps.

  • How to find the number of times method being called.....

    hi,
    can any one pls tell me how to find the number of times the method being called......herez the example....
    Refrence ref = new Refrence();
    for(int i = 0;i < arr.length; i++){
    if(somecondition){
    ref.getMethod();
    here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

    can any one pls tell me how to find the number of times the method being called......
    herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to find the number of fetched lines from select statement

    Hi Experts,
    Can you tell me how to find the number of fetched lines from select statements..
    and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
    Thanks in advance
    santosh

    Hi,
    Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
    For ex:
    data: itab type mara occurs 0 with header line.
    Select * from mara into table itab.
    Write: Sy-tabix.
    This will give you the number of entries that has been selected.
    I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

  • How to find the number of occurance of a string in text field of Infopath form?

    Hi All,
    In Infopath text field, How to find the number of occurrence of a particular string in that field?
    Thanks in advance!

    You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
    Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
    Example:
    String: "1"
    Box A - "123451234512345"
    Box B - "23451234512345"
    Box C - "2345234512345"
    Box D - "234523452345"
    etc.
    We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • How to find the number of users  connected to database from OS level(Linux)

    Hi All,
    Could anyone know , how to find the number of users connected to database without connecting with sql*plus
    is there any command to find it?
    example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
    oracle version:- 10g,11g
    Operating System:- OEL4/OEL5/AIX/Solaris
    any help will be appreciated.
    Thanks in advance.
    Thank you.
    Regards,
    Rajesh.

    Excellent.
    Tested, works as long as you set the ORACLE_SID first ( to change databases )
    ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
    Thanks!
    select OSUSER
        from V$SESSION
    where AUDSID = SYS_CONTEXT('userenv','sessionid')
        and rownum=1;Best Regards
    mseberg

  • How to find the number simultaneous call at a given moment on UCCX ?

    Hello,
    I would to know how to find the number simultaneous call at a given moment on UCCX ?
    it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
    Aubert

    Hi Gergely,
    I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

  • How to Find the number of Databases in a server.

    HI,
    Please tell me how to find the number of Databases are in a server . when the DB is not up.
    ps -ef | grep ora_
    This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
    Cheers,
    Gobi.

    Hi,
    [oracle@oralinux admin]$ lsnrctl status
    LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    TNS-01169: The listener has not recognized the password
    [oracle@oralinux admin]$
    Plz give me the solution.
    Cheers ,
    Gobi.

  • How to find the number of ODBC connections to Oracle Database

    Hi All,
    How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
    Thanks in advance,
    Mahi

    What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
    For example: if you already know of a user using ODBC, you can verify as:
    select username, osuser, terminal, program from v$session where username = 'SCOTT'
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
    SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
    Hope this helps...

  • How to find the number of columns in an internal table DYNAMICALLY ?

    Hi,
    How to find the number of columns in an internal table DYNAMICALLY ?
    Thanks and Regards,
    saleem.

    Hi,
    you can find the number of columns and their order using
    the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = sy-repid
       I_INTERNAL_TABNAME           = 'ITAB'
       I_INCLNAME                   = sy-repid
      changing
        ct_fieldcat                  = IT_FIELDCAT
    EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif
    now describe your fieldcat . and find no of columns.
    and their order also..
    regards
    vijay

Maybe you are looking for

  • Condition Types display in a Sales Order

    Dear Gurus, In our Pricing Procedure we have 2 condition types ZFR1 (Freight) and ZINS (Insurance) which are always Header type and should be entered manually. So according to normal procedure, I inserted them in the pricing procedure and maintained

  • Reinstall Adobe CS6 from hard drive onto new Mac Pro

    Hi, I downloaded the Adobe CS6 in 2012 and recently bought a new Mac Pro. I have the applications on my hard drive and I don´t know how to reinstall it onto my new computer. I have the serial number and information. Any help would be appreciated!

  • In how many ways could I connect different company for telepresence?

    Hello everyone,  I'm new in the video conference and telepresence field.  I'd like to know how many ways there are to connect different company to make a telepresence session. Currently I'm managing a telepresence infrastructure in which all the diff

  • NPE when expanding tree table

    Dear All, I have a treetable in my page, and a button that inserts some rows in master detail hiearchy based on some busniess logic. And here is my method that expands my tree table which gets called on button click event.     private void expandAllN

  • Google Maps still not working in My NOKIA 701 (Bel...

    Dear sir      I am one of the loyal costumer of NOKIA. I have NOKIA 701. I update my new software which is belle FP 2           but also Google maps doesn't work in my mobile   here are some information of my product           SW Version  113.010.150