How to maintain data of a table after I created the structure of it?

If I does not create a maintain view in SM30, can I also be able to input data without writing a programme.
Best regards,

Check the check box of
Table Maintainence allowed in Attributes tab of table
and then go to
utilities->table contents->create Entries.
Reward if useful.
Devi

Similar Messages

How to get data from COSP table, field HRKFT as the key to data from PM?

Dear ladies and gentlemen!
I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
What should I do in this case?
Thank you very much in advance!

From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
Of course, it's not a very good solution, but for now I know no other way to solve this problem.
Maybe someone knows better ways? In this case I will be very grateful for any help!
Moderator: You'd better post it on BI forums

How to Get data into I_ table which is Created dynamically

Hi Guys ,
I created one dynamic internal table , now I am want to display same internal table in my ALV? , how can I populate data into this internal table from my internal table based on some condition.
My Requirement is?
I have to display like this
1.This is my heading (field_cat of my ALV in which pack size may varry based on the flavor).
Plant flavor pack_size1----
pack_size-n
2. I have internal table( itab2) with all the pack-sizes and plant details.
3. how can I pass the these data into (itab1) which going to display in ALV ?
I can loop at itab2.
How to pass this data into itab1 relevent fields ?
Looking for Val. Inputs
With Best Regards
Prabhu
TC-Team SAP
Pepsi India
[email protected]

Hi,
This is a code snippet.
    DATA: r_dyn_table      TYPE REF TO data,
          r_wa_dyn_table   TYPE REF TO data,
          l_fields_table type SOI_FIELDS_TABLE.
    FIELD-SYMBOLS: <t_dyn_table>    TYPE STANDARD TABLE,
                   <wa_dyn_table>   TYPE ANY,
                   <w_field1>        TYPE ANY,
                   <w_field2>        TYPE ANY.
    DATA: l_oref_structure TYPE REF TO cl_abap_structdescr,
          l_abap_compdescr type abap_compdescr.
    data: check1 type i,
          check2 type i,
          l_range(20).
    r_dyn_table = IL_DYNDATA-r_dyn_table.
    ASSIGN r_dyn_table->* TO <t_dyn_table>.
    CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
    ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
    l_oref_structure ?= cl_abap_typedescr=>describe_by_data(
                         wa_supl ).
    loop at il_fill_itab into wa_supl.
      loop at l_oref_structure->COMPONENTS into l_abap_compdescr.
        ASSIGN COMPONENT l_abap_compdescr-name
               OF STRUCTURE wa_supl TO <w_field1>.
        check1 = sy-subrc.
        ASSIGN COMPONENT l_abap_compdescr-name
               OF STRUCTURE <wa_dyn_table> TO <w_field2>.
        check2 = sy-subrc.
        if check1 = 0 and check2 = 0.
          <w_field2> = <w_field1>.
        endif.
      endloop.
      APPEND <wa_dyn_table> TO <t_dyn_table>.
    endloop.
You can access your dynamic internal table via a field symbol.
Svetlin

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

How to maintain data in table control

plz send a detail description of how to create table control and maintain data in that table control.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

How to maintain TEXT ID GROUP (table TTXERN)

Dear SAP,
I am having a problem on how to maintain TEXT ID GROUP (table TTXERN). Where is it configured and why after upgraded to ECC6, this table doesn't cover all data availbale in table TTXER?
Your expert advice is realy much appreciated. will give points for those who help me out this problem.
TQ
Regards,
Nazrul

You need to run the program SDTXT1AID, it will list all entries present in TTXER but missing in TTXERN.
It is very common to come across this issue during SAP upgrade.
You can refer to the std documentation of the program &/or Google it to find further details

How to refine data in Aggregate tables in Oracle BI

Hello!
How to refine data in aggregates tables (created by "create aggregates ..." statement) after the data in corresponding database tables was updated?
It is unable to use the "delete aggregates" statement and then "create aggregates" again, because "delete aggregates" eliminates all aggregates in a model, but there are several aggregates in our model, that are intended for refining in different time moments and periods.
Thanks

903830 wrote:
Hi folks,
suppose we have table emp01, have 10 records & we create another table emp02 as
create table emp02 as select * from emp01;
now both the table have identical data.
How to find "data" in two tables are identical?Why wouldn't they be identical? You've just created one table as a copy of the other. They are identical in data terms.

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How to maintain data in scrren using ztable

how to update data in ztable by using program...
plz send a model problem...
i m creating screen(SE51) with ztable fields how to maintain data in that screen. also i m creating transaction for that screen..

Hi
There sample programes given SAP itself.
Go to SE80 and select package as SDWA and press enter
You will see whole list of screen sample programs, you can modify the code little bit to suit the tables u want to update.
Regards
Balaji

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

Fatch data from a table after a given time interval

Hello
I want to fetch date from a table after a fixed time interval is there any
way to do it.
thanks

Not sure what you want. But maybe this helps.
SELECT date+interval FROM atable;
Also if you tell us more about the business case the answers could be more to the point.

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

Where we maintain data for this Table T015W in SPRO

Hi Gurus,
I wanted to know that where we maintain data for this table T015W.
This Table relates to banking.

Hello,
You could maintain the instruction keys in SPRO under the path
Financial Supply Chain Management > Treasury and Risk Management > Basic Functions > SAP Business Partner for Financial Services > Settings for Financial Services > General Settings > Basic Settings > Define Instruction Keys
Kind regards,
Vinodh

How to maintain data of a table after I created the structure of it?

Similar Messages

Maybe you are looking for