How to maintain entry in V_T160M_CS

Hi,
Can anybody help me to know, how to maintain entry in table V_T160M_CS?
Raj

Hi Raj,
Have you tried OPJB.
1.'New entries'.
2. Enter version as 000, application area (the first two digits of the message no, for BOM it would be CO ), & message no.
3 Under category maintain as E Or W.
Check if it work. So far I know you can not update Change Message type of BOM from customizing.
Regards
Abhijit Gautam

Similar Messages

How to maintain entries in SM30

Hi,
How to maintain entries for this table FPB_LP6_R_MDT_C through SM 30?
I am facing the below Error while trying to maintain entries can anyone give me a solution.
"The maintenance dialog for FPB_LP6_R_MDT_C is incomplete or not defined".
Thanks

>
Florian Kemmer wrote:
> Tho actually it doesnt look very dangerous to me.
> Most probably there is a program which creates entries in there, and the call is generic as well, since i dont get anything in the "where used"-list.
> Tho i noticed i can create entries with TA SE16N, WITHOUT giving anything like &sap_edit.
Hi Florian,
I believe if SAP does not want the table to be maintained manually it has done so for a purpose (may be i am wrong).
And for your observation on maintaining the table through SE16N this is because in the table attributes it must be "Entries can be maintained".
BR,
Suhas

How to maintain entries in table T158G? Please help!

Hi Experts,
    We want to maintain new movement type entries in the table T158.
    How do we maintain entries in this table? is there any tcode or FM to do that?
    Please help.
Thanks
Gopal

Hello Gopal,
You should go through the transaction OMJJ by creating a new movement type as copy from a standard movement.
Table T158G contains which transactions can be assigned to BAPI_GOODSMVT_CREATE.
Each transaction has a GM code (assign code) for BAPI_GOODSMVT_CREATE.
With this method, the system does not support goods movements that are initiated by other application components via BAPI.
I hope this information helps you.
Best Regards,
Fábio Almeida
MM Support Consultant

How to maintain Entries for VIEWS in ORacle Sql developer

hi gurus,
Could you please help in maintaining an entries for VIEW is Oracle SQL develope...I have created a VIEW by name SD_WH08....now i need to maintain some entries in this for my testing purpose...how do i do this?
Your help is very much appreciated.
Regards

What do you mean by "maintaining an entries for VIEW" ?
K.

How to maintain entries in tables T894 & T881

Hi Friends,
As per note 64034 I need to maintain few entries in T894 & T881 table. But could not get where will be the customization path to maintian these entries. These entries were available in 4.7 version and few entries are missing after upgrading to ECC 6.0.
Please let me know, where can we maintian entries for these tables through customizaton.
Regards
Suresh

Hi Joshi,
Thank you verymuch for your quick reply. I think these views are not helpful.
1. I don't find any existing entries in these views (in display views).
2. The exact fields which are there in those tables are not appeared in these views.
Can you please check and let me know?
Regards
Suresh

Mass Maintain entries in tcode OKB9

Hi,
How to maintain entries in OKB9 - Default Account Assignment...
We want to maintain the entries as per Business Area / valuation area against respective Cost Element...
We have approx 500 Cost Element and approx 40 Business Areas....and it's very time consuming...
Can we Upload in Mass with new Business Area...any BDC / LSMW is possible for that...???
Please guide...

Hi,
Tell me one thing that, do you want to upload all 1000 entries with single click or what???
For any BDC/LSMW, you must create an EXCEL file in advance to upload them.
Even to design BDC/LSMW also takes time...
Just prepare the excel file with below columns and COPY and PASTE into OKB9. (But only 21 rows at a time and SAVE and again 21 rows...and so on)
Comp code
Cost Elemant
<BLANK COLUMN>
Cost Center
Order
<BLANK COLUMN>
Profit Center
Cant expect more than this solution.
Regards,
Srinu

Maintain entries in SE16

Hi,
How to maintain entries in SE16 for a particular table when there is no maintenance view and also tell me the posibility of transporting those entries to another clients.
Thanks
Gayathri

Hi Gayathri,
Goto SE16N.
Enter table name.
in the command field write &sap_edit and push enter button.
Then execute the entries.
You can change the entries as you wish and then push the save button .
Then go to SE01.
Create a workbench request manually.
Program ID : R3TR
Object : TABU
Object name : Table name.
Press key button. There press table contents button. Select entire table.
Thus you can transport table contents.
However, as long as possible, I would advise you to update entries in a table via table maintenance screens.
Regards,
Dilek
Edited by: Dilek Ersoz on Jul 14, 2009 12:38 PM

Validation: How to maintain the entry in GB02C

HI FI GURUS n EXPERTS,
My requirement is that - We want to restrict Negative posting for some GL i.e. For some GL balance should not be Zero.
When I have made the search on SDN, I found it can be done with the help of Validation: OB28 & GGB0.
Currently we are not using any validation. When we use T-Code GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message ID.
I also found that this information is maintained in Table GB02C.
When I use Se16 to see the detail of the table GB02C, I found there is only one entry Bool. Class: FP1 & Message ID 7F.
But I don't know How to maintain the entry in table GB02C & What is the T-Code for it. which message ID I have to create.
Please help.
DSC

Dear Alex,
When I use: GGB0 --> Financial Accounting --> Line Item --> New Validation
System shows a pop-up window to select Boolean Class & Message Class, I select the Message Class 9 and for Message Class Press F4 and select any message class. System gives an error message: Message ID must start with 'Z' Message no. GB116.
Basically, My question is that: Which T-Code we have to use to maintain Boolean Class & Message Class.
With thanks,
DSC

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

How to enter entries for table TVZBT

Hi,
can any one help me how to maintain payment team description in defferent languge in TVZBT table.
this table contain the following data in english
SPRAS     ZTERM       VTEXT
E              ZA20          N 30 Due from end billing
Now i have to maintain same date in french ie
F              ZA20           N 30d'f bill
how can i update.

HI,
write a small program and insert it into the table .
data : wa like TVZBT.
wa-langu = 'F'.
wa-zterm = 'ZA20'.
wa-VTEXT = '30d'f bill '
insert tvzbt from wa.
is it the case that you just want to maintain only one entry of how... if its only one time one entry then i have other way of doing it with out writing the program.. please let me know

How to Maintain table "OIB_USERPARAM"

Dear All,
Can anyone help me to understand, how to maintain the table "OIB_USERPARAM", is there a T Code or SPRO link? There are some entries in these tables which needs correction. Please help.
Regards,
Anubhav

Dear Anubhav,
if I remember correctly, the entries in table OIB_USERPARAM are automatically created for each user if he/she first uses transaction O4_TIGER, and are subsequently updated if O4_TIGER is lect correctly (e.g. F3) with the current user settings:
"When you leave the transaction, the system saves various user parameters (for example, the last used variants and the expansion status of the overview tree) so that the transaction looks the same the next time you call it. "
which can be found in the SAP online documentation:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/a45738bc8b210de10000009b38f8cf/frameset.htm
section : Management of tank dips
In addition, you can maintain a worklist of tanks for each user.
I hope this helps a bit,
Kind regards,
Markus

In scope of planning ( md01), How to maintain MRP areas in scope of plg?

Hello PP members,
In scope of planning ( md01), How to maintain plant or MRP areas in scope of planning ?
What is the transaction code for maintaining plants or MRP areas in the scope of planning
I tried transaction code SAMP, Also went to SE93( Maintain transaction) for any related transaction codes for maintaining plants in scope of planning, it wasn't much help
Thanks for your time,
Thanks Again,
Suren R

Hi,
we can use Total planning(MD01) for a single plant or use scope of planning to control whether total planning is to be carried out for single plant/sevaral plant/ for one MRP Area/sevaral MRP areas/ combination of plant and MRP Areas.
Steps :
1.Group together the plants which are to be planned in spro in --->Define scope of planning.(OM0E)
2. Define the scope of planning as 999 for ex and give description.
2. Now select that and Specify the sequence in which Plants and MRP Areas are to be planned,
3.Goto new entries and enter the plant as 1000/MRP Area as 1000 with counter 1 and plant as 1100 with counter 2 and save.
4.Execute the total planning either as online job or as background job.
5.The planning run has to be always started with paralle processing.
In SPRO in define parallel processing in MRP enter the destination for parallel processing for ex your server name and enter the no .of sessions as 1 and save.
6.Tcode MD01 enter the scope of planning group and selet the parallel processing and enter.
7. All the materials to be planned in the plant / mrp area will be planned now.
Regards,
nandha

How to make entry in table EDSDC?

Hi,
Can somebody tell me how to make entry in table EDSDC?
I need an urgent answer.
Waiting to give good points.
Thanks,
Max

Hi ,
Go to SE16 , Enter View Name -> V_EDSDC and Click on Display / Change Button to maintain entries .
Please note that you must have authorization to do maintainance for this table ; failing which you can only view the table .
If you are unable to add entries , I can tell you an alternative for doing so , through debugging .

How to make entries in TVDIR

Hi,
I want to maintain table J_1ISTATECD. When I try to maintain I get the message "The maintenance dialog is incomplete or not defined.". After debugging I found out that there needs to be an entry for table J_1ISTATECD in either TVDIR or DD25L.
How to maintain the entry in TVDIR or DD25L.
Please help.
Regards,
Sriram

Hi,
TVDIR is the view directory.
Well, first you transfer required data from J_1ISTATECD to an internal table ITAB.
Then update TVDIR from this internal table using :
MODIFY TVDIR from TABLE <itab>.
Hope it helps.

Restricting user to maintain entries in production through table maintenanc

Dear All,
I have created one table maintenance generator.
I am sending entries of table to quality and production server through transport request.
But user can directly maintain the entries in quality and production server also.
I want to restrict user that he will not be allowed to maintain the entries directly in quality and production server and entries always go through transport request from development to quality and production server.
Any idea how to restrict user to maintain entries in quality and production server.
Any pointers will be helpful and appreciated.
Kind Regards,
Tarun

Hi tarun,
for your requirement you have to create events(create new entry) in table maintanace generator for creating new entry.
create 05 event and give suroutine name as new_entry.
form new_entry.
message 'authorizatioh restricted for creating new entry' type 'E'.
or
create authorization objects then give authorization for perticular user for maintaining data in the table
by creating authorization objects.
endform.
you can also refer below link for how to create events in TMG.
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=7246565
Regards,'
Peranandam
Edited by: peranandam chinnathambi on Apr 1, 2009 4:55 PM

How to maintain entry in V_T160M_CS

Similar Messages

Maybe you are looking for