How to maintain extract structure for 2lis_02_itm in ecc ?

I have seen in the dvlp system that one field is available to move it from comm struc to extract struc for 2lis_02_itm , that is BEDNR, but now i m unable to see it in sanbox system .....in the comm stru to move it from right to left. I have del the lbwq for that app, del rsa7 q, and deactivated it and still unable to find it. Why is the find button not working while in maintain data source screen and is there anything else to be done while selecting the fields from comm struc to extract struc. Please tell me if i am missing any step to find the field. Please let me know. I need to add this EKPO-BEDNR field to the extract struc, How can I find it ?.
Please suggest experts.

Hi daniel,
Whenever u move the field from the communicationstructure to extract structure by default the hide field will be checked, plz untick (uncheck ) that field .
Hope u got i t.
Thanx & Regards,
RaviChandra
Edited by: Ravichandra.bi on Nov 22, 2011 7:09 PM

Similar Messages

Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

Hi, Experts:
I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
I have done the following in client 200:
- Activated datasources for for PM 2LIS_17_I3HDR in RSA5.
- Made selection in RSA6.
- Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
- I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
   No extraction structure for event I3: Messages active
   Message no. MCEX106
   Diagnosis
   You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
   System Response
   Data for event I3 is not transferred to the BW interface.
   Procedure
   First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
- I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
- I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
Would anyone please help me with what to do to fix this?
Thanks,
Jenny
Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

Hi, thanks for the reply!
Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
Thanks,
Jenny

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

How to maintain master record for a user before assigning it to group?

Hi!
how to maintain master record for a user before assigning it to group?
I am in SQ03 and would like to assign user to a group, but SAP sais that my user has no user master data... where it is maintained?
Help will be appreciated,
Mindaugas

I guess it will be SU12 Transaction.
Thanks
Seshu

Enhancing the extract structure for 0FI_GL_4, 0FI_AP_4, 0FI_AR_4

Hi all,
      Does anyone know how to enhance the extraction structures with additional fields for datasources 0FI_GL_4 (General ledger: line item), 0FI_AP_4 (vendors: line item) and 0FI_AR_4 (customers: line item).
Thanks,
Sabrina.

Hi
    Here are the two scenario's described in the note:
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above). Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
Example:   The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
2. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above). In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above).
           Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
           Example:
           The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
           ATTENTION:
           By using Note 430303 you can enhance DataSource 0FI_GL_4 by all fields from table BSEG (instead of BSIS); then the fields are filled automatically in the extractor.
1. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above).
            In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
1. After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
Please let me know.
Thanks,
Sabrina.

How to maintain change history for a custom field

Hi All,
I have added a new custom field in standard table FKKVKP by appending a new structure to FKKVKP. Now this custom field will appear in transaction CAA2. My requirement is I have to maintain change history for my custom field. In transaction SCDO I have seen that there is an object MKK_VKONT that maintains change history for FKKVKP entries. But I am not aware how to adjust this field so that SAP generates change history for my custom field as well.
Thanks in advance,
Venkat

Venkatesh,
DFKKTAXEX
FKKVK
FKKVKP
FKKVK_CORR
I have never used these tables but I have working experience with change docs.
The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
Of course change document should be set to that field-data element.

How to Transport Extract Structure and datasource

Hi all!
I had recently made enhancements to 0CO_PC_PCP_01 datasource.When I transported the datasource and the Extract structure, I noticed that only the append structure has been transported. The datasource has not been transported.
Could some one tell me how to collect the datasource and the Appended extract structure and transport them.
Thanks,
S.P

Hi Jaya,
I had already tried this already. When I selected the dtasource and selected the transport button. I got the message, action successfully executed. When I checked in SE09, I see no transport. Unless it asks me for a transport request, I will not see it in SE09, right.
~S.P

How to maintain serial no for sales order created by BAPI

Hi all,
We are using BAPI for creating sales order "BAP_SALESORDERDAT2" but we are not able to assign Serial number while using this BAPI. Is there any function modul, BAPI, or workarround available to solve this problem. Or how to maintain Serial number.
Regards
Shambhu Sarkar

Hi
It is not possible to to maintain serial numbers with the normal SD
BAPIS. This functionality is not scope of the BAPIS.
regards,
Ramana

Need an help to maintain catalog structure for objects parts,defects,causes,activities and coding in one z table

Hi Experts,
I am trying to create a z table with the same fields repeating for the development in PM module.
I want to have Catalog structure (Catalog,Code group,Code) for objects parts,defects,causes,activities and coding in one z table.Firstly I have created these fields by selecting it from QPCD table.Then as I want the same functionality as it is in IW21 (PM Notification) I created the fields by referring to VIQMFE, VIQMUR , VIQMEL and VIQMMA as in IW21.
1) However, I am not able to maintain the values.Once I select catalog structure for object parts and then when I am selecting it for defects the search help is still taking the object parts value in it and not allowing me to get the relevant data and also to maintain the data.
I feel the problem is of check table as all the fields are referring to the same check tables TQ15 , QPGR and QPCD but I am not getting the exact solution.
Please find attach the screen shot of the table I have created and also the error I am getting while maintaining the values.
Please do the needful.
With Regards,
Sonali Deshmukh

Hi All...
I got the solution.
Thank You.
With Regards,
Sonali Deshmukh

How to Maintain Default materials for clearing house fee (IS Oil) O3RECH1

Hi,
I am an ABAPer. I have come accross one issue in Transaction O3RECH1 (Create CH Settlement/ Transmission).
I am getting error. as No Material Exist. .. In debugging i came to know that material is empty since there is no data in field FEEMATNR of table OIRECH_APPL.
Table OIRECH_APPL --> SSR PC: Clearing House application data (IS-Oil SSR).
In that there is one filed FEEMATNR --> SSR PC: Default materials for clearing house fee.
Can any one please let me know How to maintain it.
Answer will be rewarded.

Interesting requirement. This can be achieved through Search String as suggested by Mr. Shanid.
Try to find a text in the note to payee line for bank charges for creating a search string.
For Example. See below note to payee line and assume this line for bank charges.
16,455,130155,0,5/3 BANKCARD SYS CH,,5/3 BANKCARD SYS CHARGBACKS.
Identify a text which should always come with this line for every EBS file for bank charges. Assume here "BANKCARD".
Now go to T-code OTPM.
Click on create
Srch strg name: Bank Charges
Description: Bank Charges
Search String: BANKCARD ( Based on this text system will search your not to payee line)
Once you press enter, you will get mapping details on the left side with target field "BANKCARD". Now remove the BANKCARD from target field and put there cost center which you will post for one house bank. Save the data.
Now move to second step.
Click on Search String Use.
Put your company code,
House bank(mandatroy in your case).
Interpretation Algorithm( same as you maintained in OT83 for posting rule with external transaction type).
Search String: BANKCARD.
Target Field: Cost Center.
Save.
Sorry I am not getting option to attach screenshot in SCN now. Dont know why.
Let us know if you have any doubts.
Hi Mr. Shanid,
Correct me if I am wrong.
Regards,
Mohammed

How to maintain experience requirement for a position

Hi All,
There is a very common requirement for a position like "5 years of experience in management level" I dont know how to maintain this requirement in SAP. right now we have created a qualification named "Management Experience" with a time scale assigned to it with a validity period of one year so HR dept must change the scale evey year. It works but it's not best practice. I know if there is a way we can use employee past and current work history to determine the level of experience and also how to define this requirement in position profile.
Thanks in advance,
Shahin

I guess it will be SU12 Transaction.
Thanks
Seshu

How to maintain a check for 3 way match(PO, GR, Invoice) in SRM

How to maintain/configure a check for 3 way match(PO, GR, Invoice) in SRM

Hi Sam,
Please use a Limit cart and select the radiobutton "Confirmation and Invoice" which will need a GR/Confirmation before Invoice on a PO.
Please reward points if the hint is helpful.
Thanks & Regards,
Venkat

Need to knw how to maintain cache settings for infoprovider in one go

Hi,
We are trying change the OLAP cache settings for the queries, as we know queries inherit the properties of InfoProvider so instead of changing for queries we need to change it for infoprovider. But we have 1000+ infoproviders, i want to know is there any way to change for all the infoproviders at one go"
we have around 1100+ infoproviders in our BW system
we would like to know what is the option to activate all the queries at
a time
Can you please let us know how to maintain the cache settings for all
the infoproviders in one go
and also like to know whether this will change the cache settings of
the queries present now in the system
Thanks & Regards,
Syeda Nausheen Sulthana
SAP BASIS | AtoS

Hi Nausheen,
You capture the steps that you do in changing the infocube properties in BDC.
Create an upload file with all the cubes technical names and execute the BDC program in automated way.
You can take help from ABAP expert in your team.
Let me know, if you need more details.
Thanks,
Krishnan

How to maintain a customer for one sales office

Dear All,
One customer was assigned to more than 1 sales office. Due to this collection report which customized based on sales office was showing wrong data. We need to maintain only one sales office for one customer.
If we change in master data all transactions done previously may change.So they ask to change in reference table and check the report.
Tell me where can we find the reference table. How to maintain like above.
Regards,
Ganesh

So they ask to change in reference table
What do you mean by this ?? If you want to check what are all the changes made to a customer master, then check in XD04.
thanks
G. Lakshmipathi

How to maintain Dynamic Action for Infotype 2 .

Hi SAP-HR Experts .
I want to maintain Dynamic Action for Infotype 2 .
If Employee's No. of Children exceeds then System immediately ask for maintenence of IT-21 also at the same time .
How to maintain code in table V_T588Z .
Please elaborate it .
Thanks & Regards : rajneesh .

Hi kanupriya .
your reply was Very helpful for me u2026But i unable to achieve the desired result . I maintained the entries in View V_T588Z like this .My Objective is when some body update the Infotype 2 for a employee , and his/her no. of Childrens exceeds by 2 then system should jump into IT-21 for
updation of IT-21 at the same time . I think this what Dynamic Actions work out .
==========================================================
     ANZKD 04 500 P PSPAR-TCLAS='A'
     ANZKD 04 175 P T001P-MOLGA='40'
     ANZKD 04 176 P P0002-ANZKD>='2'
     ANZKD 04 177 I INS,0021,2,01
     ANZKD 04 178 I INS,0021,2,02
==========================================================
Please suggest me what to do , as the above entries are not workout .
Your help will be very appreciated.
Regards ,
rajneesh(9873607039)

How to maintain extract structure for 2lis_02_itm in ecc ?

Similar Messages

Maybe you are looking for